OCEE DESIGN DEN SASS-0082 User manual

DEN
Stabiliser Foot (Half)
SASS-0082
Assembly Instructions

Stabiliser Foot (Half)
A x1 Inner Plate M8 Grub Screw B x1 C x4
4mm Allen Key
Components
ools
DWG No: SASS-0082
Revision:
Drawn by: CE
Drawn date: 19/10/2015
Stabiliser Foot Assembly Instructions

1.
Loosely insert the inner plate into the stabiliser foot.
2.
Loosely insert the 4x M8 grub screws into the 4x M8 tapped holes, leaving a few
millimeters of the screw head protruding.
3.
Insert the Den panel into the stabiliser foot.
4.
ighten the 4x M8 grub screws to push the inner plate into the Den panel to secure it.
his is best done by tightening each screw 2x turns in sequence to ensure the plate is
being pushed in an equal distance by each of the screws and is parallel to the vertical
plate stabiliser foot.
Den panel
B
Inner Plate
A
Stabiliser Foot (Half)
C
M8 grub screws
(x4)
4mm allen key
DWG No: SASS-0082
Revision:
Drawn by: CE
Drawn date: 19/10/2015
Stabiliser Foot Assembly Instructions