AJAX Hub 2 Plus User manual

Hub 2 Plus User Manual
Updated
June 29, 2021
Hub 2 Plus
Hub 2 Plus central unit must be installed indoors only.
MotionCam
MotionCam Outdoor

Connect all communication channels to ensure a more reliable connection with Ajax Cloud
and to secure against interruptions in the work of telecom operators.
Functional elements
OS Malevich
apps
How to set up push noti�cations on iOS
How to set up push noti�cations on Android
directly and/or through Ajax Cloud
Buy Hub 2 Plus central unit
1.
2.

Operating principle
Perforated part is required for actuating the tamper in case of any attempt to dismantle
the hub. Do not break it off!
3.
4.
5.
6.
7.
8.
9.
Jeweller encrypted protocol
What jamming of a wireless security system is and how to resist it
MotionCam
MotionCam Outdoor

LED indication
All Ajax devices
automatically updating
Use scenarios
Relay
WallSwitch
Socket
Button
How to create and con�gure a scenario in the Ajax security system

A single communication channel is connected
Lights up green
The hub is not connected to the Internet or there
is no connection with the Ajax Cloud server
Lights up red
No power
Lights up for 3 minutes, then blinks every 10
seconds. The color of the indicator depends on
the number of the connected communication
channels
Ajax account
Your account can combine two roles: the administrator of one hub and the user of another
hub.
Security requirements
Ajax apps
create an account

Connecting to the network
1.
2.

Adding a hub to the Ajax app
3.
If the Ethernet connection is not established automatically, disable proxy and MAC
address �ltration and activate DHCP in the router settings. The hub will automatically
receive an IP address. After that, you will be able to set up a static IP address of the
hub in the Ajax app.
4.
3.
Turn on the hub and wait until the logo lights up green or white.
4.
Open the Ajax app. Give access to the requested system functions to fully use the capabilities of the
Ajax app
.
How to set up noti�cations on iOS
How to set up noti�cations on Android
5.
Open the
menu Select the way of registering: manually or step-by-step guidance. If you are

Hub statuses
Icons
Devices
2G connected
3G connected
LTE connected
SIM card is not installed
The SIM-card is defective or has a PIN-code on it
Hub 2 Plus battery charge level. Displayed in 5% increments
Hub 2 Plus malfunction is detected. The list is available in hub states list
The hub is directly connected to the central monitoring station of the security
organization
Ajax security system user rights

Malfunction
Click
to open the list of Hub 2 Plus
malfunctions.
The �eld appears only if a malfunction is detected
Cellular Signal Strength
Shows the signal strength of the mobile network
for the active SIM card. We recommend installing
the hub in places with the signal strength of 2-3
bars. If the signal strength is weak, the hub will
not be able to dial-up or send an SMS about an
event or alarm
Battery Charge
Battery level of the device. Displayed as a
percentage
Lid
Status of the tamper that responds to hub
dismantling:
External power supply connection status:
1.
Devices
2.
How battery charge is displayed in
Ajax apps
— the hub lid is closed
— the hub removed from
SmartBracket holder
What is a tamper?

Connection
Cellular Data
The hub connection status to the mobile Internet:
If the hub has enough funds on the account or
has bonus SMS/calls, it will be able to make calls
and send SMS messages even if the
status is displayed in this �eld
Active SIM
Displays the active SIM card: SIM card 1 or SIM
card 2
SIM 1
The number of the SIM card installed in the �rst
slot. Copy the number by clicking it
SIM 2
The number of the SIM card installed in the
second slot. Copy the number by clicking it
Wi-Fi
Internet connection status of the hub via Wi-Fi.
For greater reliability, it is recommended to install
the hub in places with the signal strength of 2-3
bars
Ethernet
Internet connection status of the hub via Ethernet:
— the hub is connected to Ajax Cloud
— the hub is not connected to Ajax
Cloud
— the hub is connected to Ajax
Cloud via mobile Internet
— the hub is not connected to
Ajax Cloud via mobile Internet
— the hub is connected to Ajax
Cloud via Ethernet
— the hub is not connected to

Monitoring Station
central monitoring station of the security
organization:
If this �eld is displayed, the security company
uses a direct connection to receive events and
security system alarms
Hub model
Hub model name
Hardware version
Hardware version. Unable to update
Firmware
Firmware version. Can be updated remotely
ID
ID/serial number. Also located on the device box,
on the device circuit board, and on the QR code
under the SmartBracket panel
Rooms
— the hub is directly connected to
the central monitoring station of the security
organization
— the hub is not directly
connected to the central monitoring station of
the security organization
What is a direct connection?

To create a room in the Ajax app:
Room settings
Connection of detectors and devices
The hub doesn’t support
and
integration modules.
To add a device to the hub, in the Ajax app:
1.
Rooms
2.
Add Room
3.
4.
Save
uartBridge
ocBridge Plus

Hub settings
Note that after changing the settings, you should click the
button to save them.
Ajax app
1.
Devices
2.
3.
Settings
Avatar
Hub name

How to add new users to the hub
Ethernet
Wi-Fi

Cellular
SIM card settings

Keep in mind that data is counting on the hub and may differ from your operator’s
statistics.
Reset statistics
Check balance
Outgoing
USSD code
Check balance
Geofence
What geofences are and how they function

Security Schedule
How to create and con�gure a scenario in the Ajax security system
Detection Zone Test
What is Detection Zone Test
Jeweller

We do not recommend reducing the default settings of the ping period and
interval.
12 s
39 devices
24 s
79 devices
36 s
119 devices
48 s
159 devices
72 s
200 devices
Regardless of settings, the hub supports 10 connected sirens maximum!

LED Brightness
Firmware Auto-Update
Hub System Logging
Logs are �les containing information about system operation. They can help sort out
the problem in case of errors or failures.
If enabled
If disabled
How OS Malevich updates

Advanced settings
Server connection
Sirens settings
Fire detectors settings
System integrity check
PD 6662 Setting Wizard
Server Connection
Sirens settings
Fire detectors settings
System Integrity Check
Alarm Con�rmation
Restoration After Alarm
Arming/Disarming Process
Devices Auto Deactivation
PD 6662 Setting Wizard
Learn more about PD 6662:2017
Other manuals for Hub 2 Plus
5
Table of contents
Other AJAX Security System manuals

AJAX
AJAX StreetSiren User manual

AJAX
AJAX Hub 2 User manual

AJAX
AJAX StreetSiren User manual

AJAX
AJAX DoubleButton User manual

AJAX
AJAX HomeSiren User manual

AJAX
AJAX StreetSiren User manual

AJAX
AJAX StreetSiren User manual

AJAX
AJAX HomeSiren User manual

AJAX
AJAX Hub Hybrid User manual

AJAX
AJAX ManualCallPoint Jeweller User manual

AJAX
AJAX HomeSiren User manual

AJAX
AJAX KeyPad User manual

AJAX
AJAX HomeSiren User manual

AJAX
AJAX Ajax Hub User manual

AJAX
AJAX MotionProtect User manual

AJAX
AJAX KeyPad User manual

AJAX
AJAX Hub 2 User manual

AJAX
AJAX StreetSiren User manual

AJAX
AJAX Hub 2 Plus User manual

AJAX
AJAX StreetSiren DoubleDeck User manual