Alliance Laundry Systems WFF100 User manual

WFF65, WFF75, WFF100
WFF135, WFF165
Instruction manual
Washer Extractors
Technical specications
Installation instructions
Maintenance
for corresponding “CWF” and “IWF”
models, see page 5 for complete model
list.
Part No. D0875R7
Code: 249/00353/10
January 2011

1
2
3
4
3
Contents
Contents
Model Numbers .............................................................................................. 5
Safety and Environmental Informations ...................................................... 8
Safety .......................................................................................................... 8
Environmental .............................................................................................. 9
Explanation of Safety Messages ............................................................... 10
Important Safety Instructions ..................................................................... 11
Operator Safety ......................................................................................... 13
Technical data and dimensions ................................................................. 14
Technical data WFF65, IWF065, IWF014, CWF065, CWF014 ................. 14
Dimensions WFF65, IWF065, IWF014, CWF065, CWF014 ..................... 15
Technical data WFF75, IWF074, IWF018, CWF074, CWF018 ................. 16
Dimensions WFF75, IWF074, IWF018, CWF074, CWF018 ..................... 17
Technical data WFF100, IWF100, IWF025, CWF100, CWF025 ............... 18
Dimensions WFF100, IWF100, IWF025, CWF100, CWF025 ................... 19
Technical data WFF135, IWF135, IWF030, CWF135, CWF030 ............... 20
Dimensions WFF135, IWF135, IWF030, CWF135, CWF030 ................... 21
Technical data WFF165, IWF165, CWF165 .............................................. 22
Dimensions WFF165, IWF165, CWF165 .................................................. 23
Installation and Connection Instructions .................................................. 24
Surface ...................................................................................................... 24
Anchoring on a metal base ........................................................................ 24
Directly on the ground .............................................................................. 24
Mounting Bolt Hole Locations for machines, WFF65, IWF065, IWF014,
CWF065, CWF014 .................................................................................... 25
Mounting Bolt Hole Locations for machines, WFF75, IWF074, IWF018,
CWF074, CWF018 .................................................................................... 26
Mounting Bolt Hole Locations for machines, WFF100, IWF100, IWF025,
CWF100, CWF025 .................................................................................... 27
Mounting Bolt Hole Locations for machines, WFF135, IWF135, IWF030,
CWF135, CWF030 .................................................................................... 28
Mounting Bolt Hole Locations for machines, WFF165, IWF165, CWF165 .. 29
Water connection ....................................................................................... 30
Water drain ................................................................................................ 30
Electrical Installation .................................................................................. 31
Main power connection .............................................................................. 33
Electrical Specifications WFF65, IWF065, IWF014, CWF065, CWF014 ... 35
Electrical Specifications WFF75, IWF074, IWF018, CWF074, CWF018 ... 36
Electrical Specifications WFF100, IWF100, IWF025, CWF100, CWF025 ... 37
Electrical Specifications WFF135, IWF135, IWF030, CWF135, CWF030 ... 38
Electrical Specifications WFF165, IWF165, CWF165 ............................... 39
Liquid soap connection (option) ................................................................. 40
Connection of a central operating panel for coin machines (option) ......... 42

5
6
7
8
9
4
Steam connection ........................................................................................ 43
Technical remarks ....................................................................................... 44
Internal connections of the electrical heating ............................................ 44
Maintenance instruction of the machine ................................................... 45
End of day .................................................................................................. 45
General maintenance ................................................................................ 45
Periodical maintenance ............................................................................. 45
Annual maintenance .................................................................................. 46
Contact Information ..................................................................................... 47
Nameplate ................................................................................................. 47
Repair and after-sales service .................................................................... 49

5
Model Numbers 1
xWF065yyMyyyyyy
xWF075yyMyyyyyy
xWF100yyMyyyyyy
xWF135yyMyyyyyy
xWF165yyMyyyyyy
WFF65
WFF75
WFF100
WFF135
WFF165
xWF014yyMyyyyyy
xWF018yyMyyyyyy
xWF025yyMyyyyyy
xWF030yyMyyyyyy
xWF035yyMyyyyyy
Build-upBuild-up
IWF014ANM
IWF014MNM
IWF014MCM
IWF014MDM
IWF014MEM
IWF014MLM
IWF014MXM
IWF014MYM
IWF014SCM
IWF014SDM
IWF014SEM
IWF014SRM
IWF014SLM
IWF014SXM
IWF014SYM
IWF018ANM
IWF018MNM
IWF018MCM
IWF018MDM
IWF018MEM
IWF018MLM
IWF018MXM
IWF018MYM
IWF018SCM
IWF018SDM
IWF018SEM
IWF018SRM
IWF018SLM
IWF018SXM
IWF018SYM
IWF025ANM
IWF025MNM
IWF025MCM
IWF025MDM
IWF025MEM
IWF025MLM
IWF025MXM
IWF025MYM
IWF025SCM
IWF025SDM
Model numbers IWF025SEM
IWF025SRM
IWF025SLM
IWF025SXM
IWF025SYM
IWF030ANM
IWF030MNM
IWF030MCM
IWF030MDM
IWF030MEM
IWF030MLM
IWF030MXM
IWF030MYM
IWF030SCM
IWF030SDM
IWF030SEM
IWF030SRM
IWF030SLM
IWF030SXM
IWF030SYM

1
6
IWF065ANM
IWF065MNM
IWF065MCM
IWF065MDM
IWF065MEM
IWF065MLM
IWF065MXM
IWF065MYM
IWF065SCM
IWF065SDM
IWF065SEM
IWF065SRM
IWF065SLM
IWF065SXM
IWF065SYM
IWF065ZNM
IWF065ZCM
IWF065ZDM
IWF065ZEM
IWF065ZLM
IWF065ZXM
IWF065ZYM
IWF074ANM
IWF074MNM
IWF074MCM
IWF074MDM
IWF074MEM
IWF074MLM
IWF074MXM
IWF074MYM
IWF074SCM
IWF074SDM
IWF074SEM
IWF074SRM
IWF074SLM
IWF074SXM
IWF074SYM
IWF074ZNM
IWF074ZCM
IWF074ZDM
IWF074ZEM
IWF074ZLM
IWF074ZXM
IWF074ZYM
IWF100ANM
IWF100MNM
IWF100MCM
IWF100MDM
IWF100MEM
IWF100MLM
IWF100MXM
IWF100MYM
IWF100SCM
IWF100SDM
IWF100SEM
IWF100SRM
IWF100SLM
IWF100SXM
IWF100SYM
IWF100ZNM
IWF100ZCM
IWF100ZDM
IWF100ZEM
IWF100ZLM
IWF100ZXM
IWF100ZYM
IWF135ANM
IWF135MNM
IWF135MCM
IWF135MDM
IWF135MEM
IWF135MLM
IWF135MXM
IWF135MYM
IWF135SCM
IWF135SDM
IWF135SEM
IWF135SRM
IWF135SLM
IWF135SXM
IWF135SYM
IWF135ZNM
IWF135ZCM
IWF135ZDM
IWF135ZEM
IWF135ZLM
IWF135ZXM
IWF135ZYM
IWF165ANM
IWF165MNM
IWF165MCM
IWF165MDM
IWF165MEM
IWF165MLM
IWF165MXM
IWF165MYM
IWF165SCM
IWF165SDM
IWF165SEM
IWF165SRM
IWF165SLM
IWF165SXM
IWF165SYM
IWF165ZNM
IWF165ZCM
IWF165ZDM
IWF165ZEM
IWF165ZLM
IWF165ZXM
IWF165ZYM

1
7
CWF014ANM
CWF014MNM
CWF014MCM
CWF014MDM
CWF014MEM
CWF014MLM
CWF014MXM
CWF014MYM
CWF018ANM
CWF018MNM
CWF018MCM
CWF018MDM
CWF018MEM
CWF018MLM
CWF018MXM
CWF018MYM
CWF025ANM
CWF025MNM
CWF025MCM
CWF025MDM
CWF025MEM
CWF025MLM
CWF025MXM
CWF025MYM
CWF030ANM
CWF030MNM
CWF030MCM
CWF030MDM
CWF030MEM
CWF030MLM
CWF030MXM
CWF030MYM
CWF065ANM
CWF065MNM
CWF065MCM
CWF065MDM
CWF065MEM
CWF065MLM
CWF065MXM
CWF065MYM
CWF074ANM
CWF074MNM
CWF074MCM
CWF074MDM
CWF074MEM
CWF074MLM
CWF074MXM
CWF074MYM
CWF100ANM
CWF100MNM
CWF100MCM
CWF100MDM
CWF100MEM
CWF100MLM
CWF100MXM
CWF100MYM
CWF135ANM
CWF135MNM
CWF135MCM
CWF135MDM
CWF135MEM
CWF135MLM
CWF135MXM
CWF135MYM
CWF165ANM
CWF165MNM
CWF165MCM
CWF165MDM
CWF165MEM
CWF165MLM
CWF165MXM
CWF165MYM

8
2
Safety and Environmental Informations
Safety
CAUTION LABELS
Please familiarize yourself with the following standard warning symbols. They are
used throughout this manual and on the equipment to alert you to possible hazards.
Anyone operating or servicing this equipment must understand these symbols and
must follow all safety rules in this manual.
ELECTRICAL HAZARD
This symbol alerts you to the presence of a dangerous voltage, which could cause a
serious shock resulting in personal injury or death.
CONSULT MANUAL
This symbol warns you to consult the manual for important instructions concerning
the machine and possible hazards.
MOVING PARTS HAZARD
This symbol alerts you to the presence of possible dangerous moving parts within
the machine. Guards should always be in place when the machine is in operation. Be
very careful when servicing the drive system.
PINCHING HAZARD
This warning symbol indicates the presence of a pinch point on the machine. This is
a place where your hand might be pinched or crushed, resulting in a severe injury.
Make sure you understand these hazards and keep all body parts clear of them.
HOT SURFACE HAZARD
This symbol indicates the presence of a potentially hot surface. Some machine
surfaces and parts may become extremely hot during normal operation and should
not be touched.
ATTENTION
This symbol identies information about practices or circumstances that can lead to
personal injury or death, property damage, or economic loss.

9
2
Environmental
Disposal of Unit
This appliance is marked according to the European directive 2002/96/
EC on Waste Electrical and Electronic Equipment (WEEE).
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Ensuring this product is disposed
of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact your local
distributor resources.

10
Explanation of Safety Messages
Throughout this manual and on machine decals, you will nd precautionary statements (“DANGER,”
“WARNING,” and “CAUTION”) followed by specic instructions. These precautions are intended for the
personal safety of the operator, user, servicer, and those maintaining the machine.
DANGER
Indicates an imminently hazardous situation that, if not
avoided, will cause severe personal injury or death.
WARNING
Indicates a hazardous situation that, if not avoided, could
cause severe personal injury or death.
CAUTION
Indicates a hazardous situation that, if not avoided, may
cause minor or moderate personal injury or property
damage.
Safety Decals
Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could
result in injury to the operator or service technician.
To provide personal safety and keep the machine in proper working order, follow all maintenance and
safety procedures presented in this manual. If questions regarding safety arise, contact the manufacturer
immediately.
Use manufacturer-authorized spare parts to avoid safety hazards.
Additional precautionary statements (“IMPORTANT” and “NOTE”) are followed by specic instructions.
IMPORTANT: The word “IMPORTANT” is used to inform the reader of specic procedures where
minor machine damage will occur if the procedure is not followed.
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing
information that is important but not hazard related.
2

11
Important Safety Instructions
WARNING
To reduce the risk of re, electric shock, serious injury or
death to persons when using your washer, follow these
basic precautions:
1. Read all instructions before using the washer.
2. Refer to the GROUNDING INSTRUCTIONS in the installation Manual for the proper grounding of the
washer.
3. Do not wash textiles that have been previously cleaned, washed, soaked, or spotted with gasoline,
dry-cleaning solvents, or other ammable or explosive substances as they give off vapors that could
ignite or explode.
4. Do not add gasoline, dry-cleaning solvents, or other ammable or explosive substances to the wash
water. These substances give off vapors that could ignite or explode.
5. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been
used for such a period, before using a washing machine or combination washer-dryer, turn on all hot
water faucets and let the water ow from each for several minutes. This will release any accumulated
hydrogen gas. The gas is ammable, do not smoke or use an open ame during this time.
6. Do not allow children to play on or in the washer. This appliance is not intended for use by young
children or inrm persons without supervision. Young children should be supervised to ensure that
they do not play with the appliance.
7. Before the washer is removed from service or discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is moving. This is an imminently hazardous situation
that, if not avoided, will cause severe personal injury or death.
9. Do not install or store the washer where it will be exposed to water and/or weather.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or attempt any servicing unless specically
recommended in the user-maintenance instructions or in published user-repair instructions that the
user understands and has the skills to carry out.
12. To reduce the risk of an electric shock or re, DO NOT use an extension cord or an adapter to connect
the washer to an electrical power source.
13. Use a washer only for its intended purpose, washing textiles.
14. ALWAYS disconnect the washer from the electrical supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
15. Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain,
electrical power and grounding must comply with local codes and be made by licensed personnel
when required.
16. To reduce the risk of re, textiles which have traces of any ammable substances such as vegetable
oil, cooking oil, machine oil, ammable chemicals, thinner, etc., or anything containing wax or
chemicals such as in mops and cleaning cloths, must not be put into the washer. These ammable
substances may cause the fabric to catch on re.
17. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of
the fabric softener or product.
18. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this
occurs, have washer checked by a qualied service person.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve and that ll hose connections are tight. CLOSE the
shut-off valves at the end of each wash day.
2

12
21. Loading door MUST BE CLOSED any time the washer is to ll, tumble, or spin. DO NOT bypass the
loading door switch by permitting the washer to operate with the loading door open.
22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed
all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of the
reach of children at all times (preferably in a locked cabinet).
23. Always follow the fabric care instructions supplied by the textile manufacturer.
24. Never operate the washer with any guards and/or panels removed.
25. DO NOT operate the washer with missing or broken parts.
26. DO NOT bypass any safety devices.
27. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions
may result in conditions which can produce bodily injury and/or property damage.
28. It is recommended that the machine be installed by qualied technicians.
29. Before starting repairs or maintenance, shut off all power and water supplies.
30. To prevent re and explosion:
Keep the area around the machine free from inammable or combustible products.
NOTE: The WARNINGS and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not
meant to cover all possible conditions and situations that may occur. Common sense, caution, and
care must be exercised when installing, maintaining, or operating the washer.
Any problems or conditions not understood should be reported to the dealer, distributor, service agent, or
the manufacturer.
SAVE THESE INSTRUCTIONS
2

13
Operator Safety
WARNING
NEVER insert hands or objects into basket until it has
completely stopped. Doing so could result in serious
injury.
To ensure the safety of machine operators, the following maintenance checks must be performed daily:
1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible
signs must be replaced immediately. Make certain that spares are available.
2. Check door interlock before starting operation of the machine:
a. Attempt to start the machine with the door open. The machine should not start with the door open.
b. Close the door without locking it and attempt to start the machine. The machine should not start with
the door unlocked.
c. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress.
The door should not open.
If the door lock and interlock are not functioning properly, call a service technician.
3. Do not attempt to operate the machine if any of the following conditions are present:
a. The door does not remain securely locked during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly grounded circuit.
Do not bypass any safety devices in the machine.
WARNING
Never operate the machine with a bypassed or
disconnected balance system. Operating the machine
with severe out-of-balance loads could result in personal
injury and serious equipment damage.
SAVE THESE INSTRUCTIONS
2

14
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 5,9 kg 13 lb.
1:10 6,5 kg 14.33 lb.
1:9 7,2 kg 15.87 lb.
Cylinder
Diameter 530 mm 20.86 inch
Depth 295 mm 11.61 inch
Volume 65 Lit 2.29 ft³
Cabinet
Height 1041 mm 40.98 inch
Width 660 mm 25.98 inch
Depth 797 mm 31.37 inch
Front loading
Diameter door opening 300 mm 11.81 inch
Door height 355 mm 13.97 inch
To center 508 mm 20 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 700 tr/min - RPM
G-factor
Spin 145
Motor (3-phase)
4p. 1470 tr./min 0,55kW / 0,73HP
Drain valve
2"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 230/400 V 4,2 kW - 6 kW - 9 kW
Electrical 400V N/A
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1160x730x850 mm - 45.66x28.74x33.46 inch
Weight
Net 174 kg 384 lb.
Gross 192 kg 423.28 lb.
Technical data WFF65, IWF065, IWF014, CWF065, CWF014
Technical data and dimensions

151 [5.94]
75 [2.95]
226 [8.9]
277.5 [10.92]
887 [34.92]
791 [31.14]
747 [29.41]
660 [25.98]
696.5 [27.42]
60 [2.36]
180 [7.09]
K
109 [4.29]
A
D
E
B
C
F
G
I
L
164.5 [6.48]
1041 [40.98]
1014 [39.92]
355 [13.98]
550 [21.65]
660 [25.98]
55 [2.17] 55 [2.17]
220 [8.66]
48 [1.89]
273 [10.75]37 [1.46]
5 [0.2]
287 [11.3]
670 [26.37]
728 [28.66]
69 [2.72]
15
3
Dimensions WFF65, IWF065, IWF014, CWF065, CWF014
 A. Ventilation soap dispenser
B. Liquid soap connetions
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
 I. Ventilation tub
K. Drain valve
L. Steam connections
Legend: metric mm [inches]

16
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 6,9 kg 14.33 lb.
1:10 7,3 kg 16.09 lb.
1:9 8,4 kg 18.51 lb
Cylinder
Diameter 530 mm 20.86 inch
Depth 345 mm 13.58 inch
Volume 73 Lit 2.57 ft³
Cabinet
Height 1041 mm 40.98 inch
Width 660 mm 25.98 inch
Depth 797 mm 31.37 inch
Front loading
Diameter door opening 300 mm 11.81 inch
Door height 355 mm 13.97 inch
To center 508 mm 20 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 700 tr/min - RPM
G-factor
Spin 145
Motor (3-phase)
4p. 1470 tr./min 0,55kW / 0,73HP
Drain valve
2"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 230/400 V 4,2 kW - 6 kW - 9 kW
Electrical 400V 12 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1160x730x850 mm - 45.66x28.74x33.46 inch
Weight
Net 181 kg 399.03 lb.
Gross 196 kg 432.10 Ib.
Technical data WFF75, IWF074, IWF018, CWF074, CWF018

151 [5.94]
75 [2.95]
226 [8.9]
277.5 [10.92]
887 [34.92]
791 [31.14]
747 [29.41]
660 [25.98]
696.5 [27.42]
60 [2.36]
180 [7.09]
K
109 [4.29]
A
D
E
B
C
F
G
I
L
164.5 [6.48]
1041 [40.98]
1014 [39.92]
355 [13.98]
550 [21.65]
660 [25.98]
55 [2.17] 55 [2.17]
69 [2.72]
728 [28.66]
670 [26.37]
327 [12.87]
5 [0.2]
37 [1.46] 233 [9.17]
48 [1.89]
220 [8.66]
17
3
Dimensions WFF75, IWF074, IWF018, CWF074, CWF018
 A. Ventilation soap dispenser
B. Liquid soap connetions
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
 I. Ventilation tub
K. Drain valve
L. Steam connections
Legend: metric mm [inches]

18
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 8,6 kg 18.95 lb.
1:10 9,5 kg 20.94 lb.
1:9 10,5 kg 23.14 lb.
Cylinder
Diameter 530 mm 20.86 inch
Depth 440 mm 17.32 inch
Volume 95 Lit 3.35 ft³
Cabinet
Height 1041 mm 40.98 inch
Width 660 mm 25.98 inch
Depth 897 mm 35.31 inch
Front loading
Diameter door opening 300 mm 11.81 inch
Door height 355 mm 13.97 inch
To center 508 mm 20 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 700 tr/min - RPM
G-factor
Spin 145
Motor (3-phase)
4p. 1470 tr./min 0,55kW / 0,73HP
Drain valve
2"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 230/400 V 4,2 kW - 6 kW - 9 kW
Electrical 400V 12 kW
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1170x730x950 mm - 45.66x28.74x37.40 inch
Weight
Net 200 kg 440.92 lb.
Gross 209 kg 460.76 lb.
Technical data WFF100, IWF100, IWF025, CWF100, CWF025

3
151 [5.94]
75 [2.95]
226 [8.9]
277.5 [10.92]
887 [34.92]
791 [31.14]
747 [29.41]
660 [25.98]
696.5 [27.42]
60 [2.36]
180 [7.09]
K
109 [4.29]
A
D
E
B
C
F
G
I
L
164.5 [6.48]
1041 [40.98]
1014 [39.92]
355 [13.98]
550 [21.65]
660 [25.98]
55 [2.17] 55 [2.17]
69 [2.72]
828 [32.6]
770 [30.31]
427 [16.81]
5 [0.2]
37 [1.46] 233 [9.17]
48 [1.89]
220 [8.66]
19
Dimensions WFF100, IWF100, IWF025, CWF100, CWF025
 A. Ventilation soap dispenser
B. Liquid soap connetions
C. Hard water connections 3/4"
D. Warm water connections 3/4"
E. Soft water connections 3/4"
F. Main switch
G.Electrical connections
 I. Ventilation tub
K. Drain valve
L. Steam connections
Legend: metric mm [inches]

20
3
METRIC US
Capacity (dry weight) Ratio [kg/Lit]
1:11 12 kg 26.45 lb.
1:10 13,2 kg 29.10 lb.
1:9 14,5 kg 31.96 lb.
Cylinder
Diameter 650 mm 25.59 inch
Depth 400 mm 17.74 inch
Volume 132 Lit 4.66 ft³
Cabinet
Height 1204 mm 47.40 inch
Width 780 mm 30.70 inch
Depth 842 mm 33.14 inch
Front loading
Diameter door opening 300 mm 11.81 inch
Door height 455 mm 17.91 inch
To center 606 mm 23.85 inch
Speed
Wash 10 - 50 tr/min - RPM
Distribution 85 tr/min - RPM
Spin 632 tr/min - RPM
G-factor
Spin 145
Motor (3-phase)
4p. 1470 tr./min 1,10kW / 1,47HP
Drain valve
2"
Water supply
Hard, soft, warm water 3/4"
Steam connection
Steam connection 3/8"
Heating
Electrical 230/400 V 12 kW - 15 kW - 18 kW
Electrical 400V N/A
Steam X
Warm water (without additional heating) X
Warm water (with additional heating) X
Packing dimensions
(H x W x D) mm - inch 1340x 848x 950 mm- 52.75x33.38x37.40 inch
Weight
Net 280 kg 617.29 lb.
Gross 293 kg 645.95 lb.
Technical data WFF135, IWF135, IWF030, CWF135, CWF030