Alto-Shaam CombiMate 12-20MW User manual

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone].558.8744 U.S.A./CANADA FA : 262.251.7067 800.329.8744 U.S.A.ONLY
www.alto-shaam.com
DUE TO ONGOING PRODUCT IMPROVEMENT,SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.PRINTED IN U.S.A.
#92 - 10/08
ITEM NO. _______________________
FACTORY INSTALLED OPTIONS:
●Left hand door swing is standard.
■■ ➥Specify right-hand door swing as a special order.
●HALO HEAT . . . a controlled, uniform heat source that gently holds
and surrounds food to provide a better appearance, taste, and longer
holding life.
●Uses one-third to one-half the energy of conventional holding equipment.
●otionless air inside cabinet prevents transfer of flavors, retains more
product moisture, and preserves color.
●Close temperature tolerance, along with even heat distribution, maintains
an ideal serving temperature throughout the cabinet.
●Non-magnetic stainless steel interior resists corrosion.
●Roll-In Pan Rack (trolley) is designed for maximum capacity and is
completely interchangeable with the Combitherm®Combi Oven/Steamer
electric model 12•20es, or gas model 10•20esG, and the
Alto-Shaam QuickchillerT QC-50.
The Combi ate®holding cabinet features 20 gauge stainless steel construction. The cabinet is controlled with an adjustable,
electronic control which includes a ON/OFF button, heat indicator light, temperature set button, and temperature increase and
decrease buttons. The control has a range of 60° to 205°F (16° to 96°C) and includes a digital display indicating the air
temperature within the cabinet. The door has a heavy duty rotary handle.
Each holding cabinet includes one (1) Roll-In Pan Cart (trolley) which features removable handle, pan support rails to hold
twenty-four (24) full-size pans, and six (6) stainless steel wire shelves for sheet pans. Cart includes two (2) rigid casters and
two (2) swivel casters with brake.
■■MODEL 12•20MW: obile Combi ate®Companion Holding Cabinet, supported by four (4) heavy duty casters,
2 rigid and 2 swivel with brake
■■MODEL 12•20W: Stationary Combi ate®Companion Holding Cabinet, supported by four (4) heavy duty equipment legs
12•20MW
12•20W
12•20MW
12•20W
COMPANION HOLDIN G C A BINET WITH ROLL-IN C A R T

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: [phone].558.8744 U.S.A./CANADA FA : 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
DUE TO ONGOING PRODUCT IMPROVEMENT, S P E C I F I C A T I O N S A R E S U B J E C T TO C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A.
E L E C T R I C A L
VOLTAGE PHASE CYCLE/HZ AMPS kW CORD & PLUG
208-240 (AGCY)1 50/60 17.1 4.1
208 1 50/60 13.9 2.9
240 1 50/60 16.1 3.9
230 (AGCY)150/60 15.6 3.4 NO CORD OR PLUG
NNEEMMAAL6-30P
30A-250V Plug
D I M E N S I O N S : H x W x D
EXTERIOR:
52-3/4" x 35" x 41-7/8" (1340mm x 888mm x 1064mm)
INTERIOR:
37-7/16" x 25-5/16" x 33-7/8" (950mm x 642mm x 860mm)
P R O D U C T \ PA N C A PA C I T Y
288 lb (132 kg) AXI U
VOLU E AXI U : 180 QUARTS (228 LITERS)
FULL-SIZE PANS: Twenty-four (24) 20" x 12" x 2-1/2" AXI U
GN 1/1: Twenty-four (24) 530mm x 325mm x 65mm
GN 2/1: Twelve (12) 650mm x 530mm x 65mm
FULL-SIZE SHEET PANS: Six (6) 18" x 26" x 1" (12 WITH ADDED SHELVES)
Roll-in Pan Cart (UN-27968)
—Six (6) stainless steel wire shelves
—Two (2) pan support rail positions
2-9/16" (65mm) vertical spacing between rails,
21-1/16" (535mm) horizontal width between rails
CLEARANCE REQUIREMENTS
3-inches (76mm) at the back, 2-inches (51mm) at
the top, and 1-inch (25mm) at both sides
INSTALLATION REQUIREMENTS
Cabinet must be installed level. It must not be
installed in any area where it may be affected by
steam, grease, dripping water, high temperatures,
or any other severely adverse conditions.
WEIGHT
12•20MW with cart 12•20W with cart
NET 420 lb (191 kg) 420 lb (191 kg)
SHIP 515 lb (234 kg) 515 lb (234 kg)
CARTON 60" X40" X48"
D I E N S I O N S :(1524mm x 1016mm x 1219mm)
#92 - 10/08
(H x W x D)
39-1/4" (996mm)
67-11/16" (1718mm)
(with bumper)
67-1/4" (1707mm)
(without bumper)
35" (888mm)
(with bumper)
41-1/2" (1053mm)
(without bumper)
41-7/8" (1064mm)
(with bumper)
52-3/4" (1340mm)
33-1/4" (844mm)
(without bumper)
47-1/4" (1199mm)
48-7/16" (1229mm)
28-1/8" (714mm)
26-1/4" (667mm)
35-3/16" (893mm) 23-15/16" (607mm)
UN-27968
26-1/4" (667mm)
44-1/16" (1118mm)
24-3/16" (614mm)
30-5/16" (770mm)
35-5/16" (897mm)
UN-27964
O P T I O N S & A C C E S S O R I E S
■■Preheat Sealing Strip 5007925
■■Roll-in Pan Cart, 12•20es & QC-50 UN-27968
■■Roll-in Pan Cart, 10•20esG & QC-50 UN-27964
■■Roll-in Plate Cart, 12•20es & QC-50 UN-27969
2-3/4" (70mm) BETWEEN PLATES, 70 PLATES
■■Roll-in Plate Cart, 12•20es & QC-50 UN-28456
3-3/4" (96mm) BETWEEN PLATES, 52 PLATES
■■Stainless Steel Wire Shelves SH-22473
TO ACCO ODATE FULL-SIZE SHEET PANS
12•20MW
12•20W
COMPANION HOLDIN G C A BINET WITH ROLL-IN C A R T