Alto-Shaam 750-S/BCS User manual

D U E T O O N G O I N G P R O D U C T D E V E L O P M E N T,SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.P R I N T E D I N U .S.A. #32A - 11/07
ITEM NO. _______________________
W164 9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHO E: 262.251.3800 • 800.558.8744 U.S.A./ CA ADA FAX: [phone] • 800.329.8744 U.S.A.O LY
WEBSITE: www.alto-shaam.com
ANSI/NSF 4
A heated carving shelf on a single compartment holding cabinet with 22 gauge stainless steel door with magnetic catch.
The removable carving shelf has one adjustable thermostat with a range of 1 through 10, two 250 watt adjustable
infrared heat lamps, and one cutting board. The cabinet has one (1) ON/OFF adjustable thermostat, 60° to 200°F
(16° to 93°C); one (1) indicator light; and one (1) holding temperature gauge to monitor inside air temperature.
Included are two (2) chrome plated side racks (230V models use stainless steel) with eleven (11) pan positions spaced at
1-3/8" (35mm) centers, three (3) wire shelves, and one (1) set of 3-1/2" (89mm) heavy duty casters – 2 rigid and 2 swivel
with brake.
■■MODEL 750-S/BCS-2: Heavy duty holding cabinet with heated shelf base mounted directly on top, without
sneeze guard.
■■MODEL 750-S/BCS-2S: Heavy duty holding cabinet with heated shelf base mounted directly on top, with
sneeze guard.
750-S/BCS-2S
Electronic Control
ELECTRO IC CO TROL OPTIO
■■Solid state electronic control option simplifies temperature setting and
has a clear, easy-to-read LED display and includes our patented
SureTemp™ heat recovery system. SureTemp™ reacts immediately to
compensate for any loss of heat whenever the door is opened.
■■Electronic control is also available with six independent multiple
timers for each compartment to facilitate “first-in, first-out” concept.
1234 56
123456
● HALO HEAT…a controlled, uniform heat source that gently
surrounds food for better appearance, taste, and longer holding life.
● Holds hot food hot...meat, poultry, fish, potatoes, casseroles, vegetables,
rolls, etc.
●Close temperature tolerance and even heat application maintain ideal
serving temperatures throughout the cabinet.
●Lamp assembly provides additional heat to the product surface.
●Carving shelf surface is recessed to catch drippings.
●Sanitary cutting board with gravy lane completely removable.
NSF and USDA listed.
●Cabinet with non-magnetic stainless steel interior resists corrosion.
●Casters provide easy mobility.
●Antimicrobial handle retards the growth of illness-causing pathogens.
FACTORY I STALLED OPTIO S
●Right-hand door swing is standard.
■■➥ Specify left-hand door as a
special order.
■■ Window door [55609R]
ADDITIO AL FEATURES
●Optional HACCP Documentation web-based
software provides the ability to monitor,
store, and print all relevant data.
●Optional HACCP with itchen Management
web-based software provides the ability to
program, control, monitor, and store all
relevant data.
750-S/BCS
LOW TEMPERATURE HOT HOLDING CABINET
WITH CARVING SHELF
.

D U E T O O N G O I N G P R O D U C T D E V E L O P M E N T, S P E C I F I C AT I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U .S.A.#3 2 A - 11 /0 7
W164 9221 Water Street • PO Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHO E: 262.251.3800 • 800.558.8744 U.S.A./ CA ADA FAX: [phone] • 800.329.8744 U.S.A. O LY
WEBSITE: www.alto-shaam.com
D I M E N S I O N S : H x W x D
EXTERIOR:
64-1/16" x 28-1/8" x 30-15/16" (1627mm x 714mm x 785mm)
CABI ET I TERIOR:
20-1/16" x 21-15/16" x 26-1/2" (510mm x 557mm x 673mm)
P R O D U C T \ PA N C A PA C I T Y
CARVI G SHELF:70 lb (31.7 kg) MAXIMUM
HOLDI G CABI ET:
120 lbs (54 kg) • VOLUME 100 QTS (95 LTR) • MAXIMUM
FULL-SIZE PA S:GASTRO ORM 1/ 1:
Ten (10) 20" x 12" x 2-1/2" 530mm x 325mm x 65mm
Six (6) 20" x 12" x 4" 530mm x 325mm x 100mm
Four (4) 20" x 12" x 6" 530mm x 325mm x 150mm
FULL-SIZE SHEET PA S (O WIRE SHELVES O LY):
Up to Five (5) 18" x 26" x 1" – W I TH A DD ITI ON A L W IR E SH ELV ES
O P T I O N S & A C C E S S O R I E S
■■Bumper for cabinet, FULL PERIMETER 5004861
■■Carving Holder, Prime Rib HL-2635
■■Carving Holder, Steamship (Cafeteria) Round 4459
Casters, Stem - 2 RIGID, 2 SWIVEL W/BRA E
■■5" (127mm) 5004862
■■2-1/2" (64mm) 5008022
■■Cutting Board, 18" x 24" x 1/2" (457 x 610 x 13mm) BA-2054
■■Door Lock with ey L -22567
■■Drip Pan, with Drain, 1-11/16" (43mm) deep 14831
■■Drip Tray - External 5004975
■■Legs, 6" (152mm), Flanged (SET OF FOUR) 5004863
■■Pan Grid, Wire - 18" x 26" PAN INSERT PN-2115
HACCP Network Options (ELECTRONIC CONTROL ONLY)
REFER TO SPECIFICATIO #9015 FOR APPLICABLE PART UMBERS
■■HACCP Documentation
■■HACCP with itchen Management
■■Probe, Internal Temperature (ELECTRONIC CONTROL)AVAILABLE
■■Shelf, Chrome Wire, REACH-IN SH-2105
■■Shelf, Chrome Wire, PASS-THROUGH SH-2327
■■Shelf, Stainless Steel, Flat Wire, REACH-IN SH-2324
■■Shelf, Stainless Steel, Rib Rack SH-2743
I N S TA L L AT I O N R E Q U I R E M E N T S
This appliance must be installed level. It must not be
installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
WEIGHT
750-S/BCS-2 750-S/BCS-2S
ET 220 lb (100 kg) EST. 225 lb (102 kg) EST.
SHIP 275 lb (125 kg) EST. 280 lb (127 kg) EST.
1ST CARTO :41" X35" X35" (1041mm x 889mm x 889mm)
2D CARTO :32" x 30" x 20" (813mm x 762mm x 508mm)
(H x W x D)
C L E A R A N C E R E Q U I R E M E N T S
3-inches (76mm) at the back, 2-inches (51mm) at the top,
1-inch (25mm) at both sides
53-9/16" (1360mm)
55-1/2" (1408mm)
33-7/8" (860mm)
with optional bumper
30-15/16" (785mm)
25-1/8" (638mm)
30-7/16" (772mm)
28-1/4" (716mm)
with optional bumper
33-3/16" (843mm)
with 3-1/2" casters*
25-3/4" (653mm)
27-7/8" (708mm)
64-1/16" (1627mm) with 3-1/2" casters
28-1/8" (714mm)
64-1/8" (1629mm) with optional 5" casters
63-1/16" (1602mm) with optional 2-1/2" casters
64-1/8" (1629mm) with optional 6" legs
750-S/BCS
LOW TEMPERATURE HOT HOLDING CABINET
WITH CARVING SHELF
E L E C T R I C A L - H O L D I N G C A B I N E T
VOLTAGE PHASE CYCLE / HZ AMPS kW CORD & PLUG I CLUDED
120 1 60 9.0 1.08 NEMA 5-15 P , 15A-125 V PLUG
208-240 (UL)1 60 4.5 1.08 NEMA 6-15 P ,
at 208 1 60 3.9 .80 15A-250 V PLUG
at 240 1 60 4.5 1.08 (USA ONLY)
230 1 50 4.3 1.0 CEE 7/7, 220-230VPLUG
15A-125V PLUG
NEMA 5-15P
20 AMP 125 VOLTS
PLUG, NEMA 5-20P
PLUG: NEMA 6-15P
15A, 250V
PLUG, CEE 7/7 (SCHUKO)
16 AMP 250V (#701410)
15A-125V PLUG
NEMA 5-15P
20 AMP 125 VOLTS
PLUG, NEMA 5-20P
PLUG: NEMA 6-15P
15A, 250V
PLUG, CEE 7/7 (SCHUKO)
16 AMP 250V (#701410)
PLUG,CEE 7/7 (SCHUKO)
16AMP 250V (#701410)
E L E C T R I C A L - C A R V I N G S H E L F
VOLTAGE PHASE CYCLE / HZ AMPS kW CORD & PLUG I CLUDED
125 1 50/60 8.0 1.0 NEMA 5-15 P , 15A-125 VPLUG
230 1 50/60 4.5 1.0 CEE 7/7, 220-230V PLUG
15A-125V PLUG
NEMA 5-15P
20 AMP 125 VOLTS
PLUG, NEMA 5-20P
PLUG: NEMA 6-15P
15A, 250V
PLUG, CEE 7/7 (SCHUKO)
16 AMP 250V (#701410)
PLUG,CEE 7/7 (SCHUKO)
16AMP 250V (#701410)