Amino Maxi ATV User manual

1TV input source select
2TV/AUX power/standby
3Color navigation
4‘A’ button
5Set-top box (STB) PVR* controls
6Apps
7Navigation and OK
8Back
9Volume up and down
10 Channel select and text entry
11 Information
12 Search
13 Infra-red (IR) window
14 Microphone
15 STB power/standby
16 ‘B’ button
17 ‘C’ button
18 Electronic Program Guide
19 Home
20 Voice control
This button may have or icon
21 Channel/Page up and down
22 Mute
23 Subtitles/closed captions
24 Last channel recall
25 Low battery warning LED
*Personal video recorder – only available on certain models of STB
Note: Some functionality may not be available on specic models
of STB. Functionality may also vary depending on the TV service
delivered by your service provider.
Remote control layout
1. Activate batteries
To activate the batteries before rst use of
the remote control, pull out the plastic tab.
2. Controlling the STB
(pairing the remote control)
The Maxi remote control is designed to control your STB
and (optionally) your TV or auxiliary device (alternative video
source). Ensure the STB is powered on, connected to a TV,
and has nished its start-up procedure. Ensure your TV input
source is set to display the output from the STB.
During the initial setup of the STB, you will be guided through the
process of pairing the remote control with the STB. The image below
shows what you can expect to see on your TV screen.
1. Point the remote control at the STB. Do not cover the infrared (IR)
window on the front of the remote control or at the front of the STB.
2. Press and hold the OK key (7) and APPS key (6) simultaneously for
5 seconds or until the STB power key (15) ashes twice to indicate
successful pairing.
3. Release both keys.
4. The STB power light should be illuminated Blue.
Once the pairing is successful, the pairing screen will disappear
from your screen.
Note: The remote is in “pairing mode” when the STB key (15) is
illuminated blue. When in pairing mode, only the BACK key (8) on
the remote control will work. You must press the BACK key to exit
pairing mode if you wish to use any other function.
3. Controlling the TV with your Maxi remote
The Maxi remote control for Android TV supports a
“Simple Remote Setup”. This will automatically detect
the brand of TV connected to your STB via HDMI.
The setup wizard will guide you through the steps
to conrm that the remote control is able to control
certain functions on your TV (volume, mute etc.) as well
as controlling your STB. The image below shows the
rst screen of the Simple Remote Setup wizard.
If you a receive a new remote control, you can trigger
the Simple Remote Setup by going to: Settings >
Device Preferences > Remotes and Accessories.
Select your remote control from the list on screen and
choose “Simple Setup”.
If the Simple Remote Wizard is not displayed or is
unsuccessful, please see section 4 of this guide.
Maxi ATV Remote Control User Guide

5. How do I return my remote to Factory
Settings?
1. Press the TV input source selector key (1) and the Apps key
(6) simultaneously for at least three seconds until the TV/AUX
POWER key (2) ashes twice and then stays lit.
2. Enter the key sequence 9 8 1 on the remote control text entry
keys (10). After completing this sequence, the STB power/
standby key (15) will ash twice. The settings pairing the Maxi
ATV remote control with your TV and STB are now deleted from
the remote control and it returns to factory settings.
Battery information
Do not mix dierent types of battery or old and new
batteries.
Do not use rechargeable batteries.
Remove the batteries from the remote control if you
are not going to use it for several weeks, to avoid the
risk of leakage.
Please respect the environment and any local
regulations and dispose of old batteries in a
responsible manner.
Do not attempt to recharge the batteries supplied with
your remote control.
Immediately remove any leaking batteries.
Take care when handling leaking batteries as they
may cause burns to the skin or eyes, or other physical
injuries.
99-709852-08 Rev. 03-01
4. Learning Mode – For use if the Set Up
Wizard is unsuccessful
The Maxi ATV remote control can learn a key function from another
‘source’ remote control (e.g. the one supplied with your TV), enabling
the Maxi ATV remote control to perform the same function.
1. Choose your ‘target key’ on the Maxi ATV remote control. This key
will be the one that learns the function from the source remote
control. It must be one of the following keys: TV/AUX POWER (2)/
TV INPUT (1)/ VOL+ / VOL- (9) / MUTE (22).
2. Press the number 4 key and the number 6 key simultaneously for
at least three seconds. The TV/AUX POWER key (2) will ash twice
and remain on.
3. Press your target key on the Maxi ATV remote control within 30
seconds:
• if the chosen target key is valid for learning mode, the TV/AUX
POWER key (2) will give a conrmation ash and remain on.
• if the chosen target key is invalid for learning mode, or you do not
press a key within 30 seconds, the TV/AUX POWER key (2) will give a
long ash and return to normal mode. Return to step 1 to try again.
4. Hold the Maxi ATV remote control 3 - 6 cm from the source
remote control with the IR windows facing each other, then press
your target key on the source remote control. For example, if your
target key on the Maxi ATV remote control is mute, press mute on
the source remote control.
5. If the IR signal is received correctly, the TV/AUX POWER key (2)
will no longer be illuminated and the remote control will return to
normal mode with its newly learned function. This will overwrite
any previously learned code on the target key.
6. If the IR signal is not received correctly, or is received after 30
seconds, the Maxi ATV remote control will not store the code from
the source remote control. The TV/AUX POWER key (2) will give a
long ash and return to normal mode. Return to step 1 to try again.
7. If the Back key is pressed on the remote control while it is waiting
for an IR signal, the TV/AUX POWER key (2) will give a long ash
and return to normal mode.
8. To clear a learned function from a target key, press the A key (4)
and the APPS key (6) simultaneously for at least three seconds.
The TV/AUX POWER key will ash twice and remain on. Then press
your target key twice. The TV/AUX POWER key (2) will ash to
conrm the target key has been cleared.