Amino Birch User manual

NOTE - This remote control operates set-top box (STB) functions only.
When the remote control is first operated all buttons transmit commands for
the STB. The exact button function will depend on your service provider. When
pressing a remote control button, point the remote control towards the front of
the STB to ensure correct operation. Do not cover the infra-red (IR) window at
the front of the STB.
When a button on the remote control is pressed, the STB standby button will
flash.
If a button is pressed for more than 30 seconds the remote control will stop
transmitting commands to preserve battery life.
1. Operation
Birch Remote Control User Guide
99-709852-06 Rev.02-00 AM-010482-DS v2

1 2 3
1 STB standby button
2 STB PVR transport buttons
3 STB menu button
4 Back button
5 Volume up and down buttons
6 Picture -in-Picture on/off button
7 Previous channel select button
8 Teletext button (press and release)
9 Mute button
10 Colour navigation buttons
11 Information button
12 Navigation and OK buttons
13 Exit button
14 Channel up and down buttons
15 Page up and down buttons
16 Electronic Program Guide button
17 PVR button
18 Channel select buttons and text entry
19 Subtitles button
Note: Some button functionality (e.g.
PVR) may not be available on specific
models of STB.
Do not mix different types of battery or old and new batteries.
Do not use rechargeable batteries with the remote control. Do not attempt to
recharge the batteries.
Remove the batteries from the remote control if you are not going to use it for
several weeks, to avoid the risk of leakage.
Immediately remove any leaking batteries. Take care when handling leaking
batteries as they may cause burns to the skin or eyes, or other physical injuries.
Please respect your environment and any local regulations and dispose of old
batteries in a responsible manner.
1. Slide the battery housing cover downwards to remove.
2. Insert 2 x AAA batteries observing the correct polarity.
3. Refit the battery housing cover.
Battery information
3. Inserting batteries2. Remote control layout