Amino Nova User manual

1Power on/o button
2TV input select button
3
Device control buttons
for TV, STB, DVD or AUX (if
programmed)
4Options button for on-
screen menu items
5Back button
6On-screen menu button
7Exit from on-screen menu
(or back to Live TV) button
8Electronic program guide
(EPG) button
9Previous channel select
button
10 Volume up and down
buttons
11
Input button for a full stop
(period) or for displaying
the on-screen keyboard
12 DVR button*
13 Live TV button*
14 Setup button for Nova
15 Transport buttons for Live
TV, DVR or VOD
16 Record start/stop button
17 Program information
button
18 Navigation and OK buttons
19 VOD button*
20 Colour buttons*
Note: Some button functionality (for example, DVR) may not be
available on specic models of STB, and availability of certain
features is dependent on your service provider.
21
Channel up and down
buttons or Page up and
down buttons for EPG
22 Mute button
23 Channel and text entry
buttons
24 Closed captions on/o
button
25 Media button*
Remote control layout
1. Inserting batteries
1. Press the indent on the battery housing cover and
slide it downwards to remove.
2. Insert 2 x AA batteries, observing the correct polarity.
3. Ret the battery housing cover.
Battery information
Do not mix dierent types of battery or old and new batteries.
Do not use rechargeable batteries with the remote control. Do not
attempt to recharge the batteries.
Remove the batteries from the remote control if you are not going
to use it for several weeks, to avoid the risk of leakage.
Immediately remove any leaking batteries. Take care when handling
leaking batteries as they may cause burns to the skin or eyes, or
other physical injuries.
Please respect the environment and any local regulations and
dispose of old batteries in a responsible manner.
Nova Remote Control User Guide
2. Remote control setup: Brand Search
The Nova remote control can be programmed to operate your TV set
or another device, for example a DVD player. The Nova does this by
registering a 5-digit brand code that is specic to the device.
1. Note the brand of your device, then nd its 5-digit brand code
by referring to the brand code tables on the Amino resources
page (www.amino.tv/resources). Make a note of the 5-digit brand
code.
2. Make sure your device is turned on.
3. On the remote control, press the device control button (3) for
the device you want to control, for example if you want to control
a DVD player, press DVD.
4. Press and hold the Setup button (14) for approximately three
seconds until the device control button ashes twice.
5. Enter the 5-digit brand code for your device. On each digit entry
the device control button will ash. If you make an error, the LED
will give a single long ash.
6. Press the Power on button (1). If your device turns o then setup
is complete.
7. If your device does not turn o, repeat the setup procedure
using another code (if listed) for the device. You may need to try
several codes.
If you change your device to a dierent brand and the remote
control requires re-programming, repeat this brand search
procedure with your new device.
If your device is not listed, or you have tried all the codes listed for it
and it still does not respond to the remote control, your device may
still be supported and you should try the Auto Search method.

3. Remote control setup: Auto Search
If your device cannot be found by the previous brand search method
and you have tried all the codes listed for that device, then Auto
Search can be used.
1. Make sure your device is turned on.
2. On the remote control, press the device control button for your
device.
3. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice.
4. Press the number buttons 9 9 1 then press the Power button.
5. Press the CH+ button repeatedly until your device turns o.
6. Press and hold the Setup button until the device control button
ashes twice. The brand code is now saved.
4. Key ‘punch through’ setup
When you have congured the Nova remote control to work with
a selected device, the remote control buttons will operate that
device. However, specic buttons can be sent to another device by
using the ‘punch through’ feature: for example you may want to send
the volume up and down buttons to an AUX device rather than to
your TV set.
1. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice.
2. Press the number buttons 9 7 8
3. Press the device control button for the device you want to control,
for example if you want to control a DVD player, press DVD.
4. Press the keys you want to punch through, for example Volume up
and down, Mute.
5. Press the device control button for the device(s) you want to
target, for example STB, DVD.
6. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice. The ‘punch through’
setup is now complete.
7. If you make an error, the LED will give a single long ash.
FCC statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: Any changes or modications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation of the device.
IMPORTANT NOTE:
RF exposure warning statement:
1. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
2. This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20
centimetres between the radiator and your body.
Industry Canada statement
This device complies with ISED’s licence-exempt RSSs. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris
un brouillage susceptible de provoquer un fonctionnement
indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayon-
nements ISED établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.
5. Resetting the remote control
Resetting Brand Search or Auto Search
1. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice.
2. Press the number buttons 9 7 7
3. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice.
4. If you make an error, the LED will give a single long ash.
Resetting ‘punch through’
1. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice.
2. Press the number buttons 9 7 8
3. Press and hold the Setup button for approximately three seconds
until the device control button ashes twice.
4. If you make an error, the LED will give a single long ash.
99-709851-04 Rev. 01-01