Amit BDG761-0P1 User manual

Quick Installation Guide
BDG761-0P1
BDG761-0T1
BTG771-0T1
3G/LTE VPN Gateway
V1.0_201401

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 2
Chapter 1 Introduction
Congratulations on your purchase of this outstanding product: 3G/LTE VPN Gateway. This
device is specifically designed for SMB mobile office. No matter offices are located at wire
unreachable area or on the move, it can connect to Intranet of headquarter instantly. No
bother to apply for expensive leased line in advance. Combing with WiFi LAN access and
NAT, it really becomes an on-the-move hotspot. With multiple wireless WAN fail-over, it
guarantees non-interrupt operation even no fixed line is available. By Dynamic VPN and
failover technology, it can establish a secure non-stop connection with headquarter even
IP is changing all the time. Built-in mobile application such as SMS and USSD is
convenient for management. Firewall protection is useful to avoid hackers attacking. With
embedded robust security and firewall function, it’s suitable for finance networking
requirement, like ATM and vending machine. Convenient VoGSM1 feature can call
anywhere through GSM or UMTS network without pre-installed PSTN line. VoIP feature
can enable secure and cost effective Intranet voice communication for mobile office.
Overall speaking, this VPN gateway is an integrated access device, and especially
designed for mobile office, mobile shop, temporary group, branch office, ATM, Kiosk, and
different kinds of vending machine.
1 VoGSM(Voice over GSM) feature is only available on BTG771.

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 3
1.1 Contents List
Items Description Contents Quantity
1 3G/LTE VPN Gateway
1pcs
2 3G/4G Antenna
2pcs
3 WiFi Antenna
2pcs
4 Power Adapter 1pcs
5 RJ45 Cable 1pcs
6 CD 1pcs

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 4
1.2 Hardware Installation
1.2.1 WARNING
1.2.2 SYSTEM REQUIREMENTS
Network Requirements
 An Ethernet RJ-45 cable or DSL modem
 3G or LTE cellular service subscription
 IEEE 802.11n or 802.11b/ g wireless clients
 10/100 Ethernet adapter on PC
Web-based Configuration Utility
Requirements
Computer with the following:
 Windows®, Macintosh, or Linux-based
operating system
 An installed Ethernet adapter
Browser Requirements:
 Internet Explorer 6.0 or higher
 Chrome 2.0 or higher
 Firefox 3.0 or higher
 Safari 3.0 or higher
CD Installation Wizard Requirements
Computer with the following:
 Windows® 7, Vista®, or XP with Service
Pack 2
 An installed Ethernet adapter
 CD-ROM drive
 Do not use the product in high humidity or high
temperatures.
 Only use the power adapter that comes with the
package. Using a different voltage rating power
adaptor is dangerous and may damage the product.
 Do not open or repair the case yourself. If the
product is too hot, turn off the power immediately
and have it repaired at a qualified service center.
 Place the product on a stable surface and avoid
using this product and all accessories outdoors.
Attention

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 5
1.2.3 Hardware Configuration
Rear View:
BDG761-0P1 / BDG761-0T1
BTG771-0T1
Front View:
Auto MDI/MDIX RJ-45 Ports
1x FE WAN to connect Internet,
4x FE LAN to connect local
RS-232 Port
WiFi
Antenna
Receptor
for Power
A
dapter
Reset
Button
Power
ON/OFF
Switch WiFi
Antenna
Auto MDI/MDIX RJ-45 Ports
1x GE WAN to connect Internet,
4x GE LAN to connect local
WiFi
Antenna
Receptor
for Power
A
dapter
USIM/SIM
Slot
Power
ON/OFF
Switch
WiFi
Antenna
RJ11 Port
to connect
phone

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 6
BDG761-0P1 / BDG761-0T1
BTG771-0T1
USIM/SIM Slot 3G/4G Antenna 3G/4G Antenna
USIM/SIM Slot 3G/4G Antenna 3G/4G Antenna
USB Port

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 7
1.2.4 LED Indication
BDG761-0P1 / BDG761-0T1
LED Description
3G/4G Signal
Strength
OFF: no 3G/4G signal, or not in 3G/4G mode
Red and steady on: Connected. Signal strength is in weak
level
Red in fast flash: roaming alert, and 3G/4G signal strength
is in weak level
Amber and steady on: Connected. Signal strength in middle
level
Amber in fast flash: roaming alert, and 3G/4G signal
strength is in middle level
Green and steady on: Connected. Signal strength in strong
level
Green in fast flash: roaming alert, and 3G/4G signal strength
is in strong level
WAN
OFF: No Ethernet cable attached
Green: Ethernet connection is established
Green in flash: data packet transferred via Ethernet
LAN1 ~ LAN4
OFF: No Ethernet cable attached or device is not linked
Green: Ethernet connection is established
Green in flash: data packet transferred via Ethernet
Wi-Fi
OFF: Wireless Radio is disabled
Green and steady on: Wireless Radio is enabled
Green in flash: data packet transferred
3G/4G
OFF: 3G/4G connection is not established
Green: 3G/4G connection is established
Green in flash: data packet transferred via 3G/4G

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 8
BTG771-0T1
LED Description
Status
Flash per second: system is powered on, and working
normally
Green and steady on: a problem occurred with system
operation
OFF: system is powered off, or a problem occurred with
system operation
3G/4G Signal
Strength
OFF: no 3G/4G signal, or not in 3G/4G mode
Red and steady on: Connected. Signal strength is in weak
level
Red in fast flash: roaming alert, and 3G/4G signal strength
is in weak level
Amber and steady on: Connected. Signal strength in middle
level
Amber in fast flash: roaming alert, and 3G/4G signal
strength is in middle level
Green and steady on: Connected. Signal strength in strong
level
Green in fast flash: roaming alert, and 3G/4G signal strength
is in strong level
WAN
OFF: No Ethernet cable attached
Green: Ethernet connection is established
Green in flash: data packet transferred via Ethernet
LAN1 ~ LAN4
OFF: No Ethernet cable attached or device is not linked
Green: Ethernet connection is established
Green in flash: data packet transferred via Ethernet
Wi-Fi
OFF: Wireless Radio is disabled
Green and steady on: Wireless Radio is enabled
Green in flash: data packet transferred
2G/3G Green and steady on: 2G/3G connection is established
4G Green and steady on: 4G connection is established
SMS
Green and steady on: SMS storage is full in SIM card
Green and flash: if any unread or new coming message
OFF: no unread or new coming message

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 9
Chapter 2 Getting Started
2.1 Connect Your Device
Before you can use this product, you need to connect your PC or device to this gateway
first. You can connect your PC to one of LAN1~LAN4 ports through an Ethernet cable.
Otherwise, your device can also connect to it through Wi-Fi. The default SSID of this
gateway is “default”, and without encryption by default. Your PC or device will get a IP
address automatically after connecting to this gateway.
2.2 Setup Wizard
You can browse web UI to configure the device. Firstly, you need to launch the browser
on your PC and then the Setup Wizard will guide you to finish basic setup step-by-step.
Browse and Activate the Setup Wizard
Type in the IP Address (http://192.168.123.254) 2
When you see the login page, type the password ‘admin’ 3 and then click ‘login’ button.
After login, Select your language from the list.
2 The default LAN IP address of this gateway is 192.168.123.254. If you change it, you need to type new IP address.
3 It’s strongly recommending you to change this login password from default value.

3G/LTE VPN Gateway
BDG761/BTG771 Quick Installation Guide 10
Select “Wizard” for basic settings in a simple way.
Or, you can go to Basic Network / Advanced Network / Applications / System to setup
the configuration by your own selection.
Press “Next” to start the Setup Wizard.
Configure with the Setup Wizard
Step 1
You can change the login password of
web UI here. It’s strongly recommending
you to change this login password from
default value.