AMX Mio Modero DMS Guide

All information contained herein
reproduced, or used as the basis
for manufacture or sale without
This drawing may not be copied,
has been previously established.
to the extent the information
shall be confidential except
that is not generally known
property of AMX Corporation.
NOTICE: This drawing is the
written permission.
REL APPR
= +.008 -.005 PROD ENGR OVER .500
SURFACE FLATNESS .003 TIR PER LINEAR INCH.
FRACTIONAL DIMENSIONS INCLUDING HOLES: +/- 1/64
DO NOT SCALE THIS DRAWING.
ANGLES: +/- 1.0°
ALL DIMENSIONS IN INCHES.
THIRD ANGLE
PROJECTION
MATL SUP
QUALITY
XXX = .005
= +.006 -.005
= +/- .005
TOLERANCE ON DECIMAL DIMENSIONS: XX = .010
UNLESS OTHERWISE SPECIFIED:
TOLERANCE ON HOLE DIAMETERS:
.250 TO .500
UNDER .250 ú ENGINEER
ENGR SERV
DRAWN
REL DATE
07-25-05 JSV
PICTORAL
MIO MODERO DMS
95-2408-01
95-2408-01
A
FULL
1 OF 1
DWG. NO.
D
SCALE:SIZE
SHEET
REV.
REV APPR
A7591 RELEASE TO MANUFACTURING
REV ECN DESCRIPTION
REVISIONS
DATE APPROVED