Anet A8 User manual

A8 3D PrinterInstallationGuide

A8 Assembly Instructions
Attention:
1. Please make sure the package not broken when you receive
it.
2. Please check the printer parts according tothe packing list.
3. Please contract your supplier if any questions.
4．the installation of graphics and text for the model
diagram, for reference only, in kind to receive goods prevail.

A8 assembly parts list 1

A8 assembly parts list 2

A8 assembly parts list
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
3

A8 assembly parts list 4

A8 assembly parts list 5
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/

A8 assembly parts list 6
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Pleasecheckprinterpartsquantitywhenyoureceiveit.

Name of each printer part

Step1
Assembly Step 1
Please be aware the screw holes is in
red circles

Assembly Step 2
Pleasebeawarethescrew
holesisinblack circles
Step 2

Assembly Step 3
Y axis motor and wire 400mm
Motor fixing plate
Y axis position switch 700mm
Rearfixing plate
Step

Assembly Step 4
Step 2
Step 3

Assembly Step 5

Assembly Step 6
Threaded rod 400mm

Y Guide rod 380mm
Assembly Step 7

Attention：Leave vacancy between belt fixation
clampandhotbedfixedplateforbeltpositioning.
Assembly Step 8

Assembly S t e p 9
B e f o r e Assembly
After Assembly
Attention:Pleasediagonallytightenthescrewswhen allareinthereplace
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/

Assembly Step 10
Attention:BeltisforX&Yaxistransmitting.Cutthe lengthyou
needtoeachtransmissionshaft.Thebeltis1.5m intotaland10-20
cm left after installation.

Assembly Step 11
wing nuts will keep the height of hot bed level as well as
firming the hotbed.
Attention:Hotbed screws should be in the bottom, and