APS GR18GEC00U User manual

Grille Installation Instruction
The instruction here is for your reference only. You may need to bend the grille a little bit to
adjust to fit. We strongly recommend the professional installer for best result.
Part#
Application
05~10 Chrysler 300/300C
Parts List
Item
Part Name
QTY
Description
Item
Part Name
QTY
Description
1
Grille
1
SS./ AL
4
Washer
10
6#
2
Stud
10
6-32×1 1/2″
5
Plastic Body Retainers
6
For replacing the OEM
Retainers
3
Lock Nut
10
6-32
6
Install Notes: Overlay × Replacement Drill Cut 
Step
Description
illustration
1
Identify the grille & hardware with parts list.
2
Pop hood, remove the black plastic cover (on top of OEM grille / front panel) from vehicle. This will allow access to the
rear of the grille shell.
Option: If necessary, according to the factory menu, remove the front bumper (with OEM grille) from vehicle.
3
According to the factory menu, remove
the OEM grille shell from vehicle.
4
Secure the studs to the welded nut on the
rear of the grille.
6-32×1 1/2"
5
Center the grille into the opening on the
factory front bumper. Be sure the studs
are through the factory holes on the front
bumper.
*if necessary, drill holes on the lip of the
front bumper according to the position of
the studs.
GR18GEC00U
Please use masking tape and tape the OEM grille shell along the edge to protect your vehicle during
installation.
We are not responsible for any damage caused by the installation. Thank you for choosing our product!

Grille Installation Instruction
Part#
GR18GEC00U
Application
05~10 Chrysler 300/300C
6
Secure grille onto the front bumper using
the washers & lock nuts from the back
side of the OEM front bumper.
(10)Lock Nuts & (10) Washers
7
Make sure the grille is centered and tighten the fasteners.
8
Re-install the front bumper with grille on to the vehicle.
9
Reinstall the black plastic cover which was removed in step 2
10
Installation completed!!!
The instruction here is for your reference only. You may need to bend the grille a little bit to
adjust to fit. We strongly recommend the professional installer for best result.
Please use masking tape and tape the OEM grille shell along the edge to protect your vehicle during
installation.
We are not responsible for any damage caused by the installation. Thank you for choosing our product!
Discover other car and truck custom grilles on our website.