Argos 392/4839 User manual

Width - 52cm
Depth - 43cm
Height - 99.5cm
Dimensions
Colourmatch Gemini Bar Stool
Assembly Instructions - Please keep for future reference 392/4839
414/8793
414/6489
391/9655
Issue 1 - 09/04/15
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800

1
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Parts of the assembly will be
easier with 2 people.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Do not stand on the stool.
• Do not use this stool as a step
ladder.
• To reduce the
likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Unit weight: 4.25 kgs.
• Maximum safe weight of user:
110kgs.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.

2
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 640 0800
Please check you have all the fittings listed below
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
1Seat
(52 x 42 x 29cm)
2Stretcher
(Ø2.2 x 38.2 x 38.2cm)
3Upper leg
(72 x 52.5 x 3cm)
4Lower leg
(72 x 51 x 3cm)
A B C
E
M6 x 35mm Bolt x 8
D
Nut x 1
M6 x 25mm Bolt x 1
Curved washer x 4
F
Allen key x 1 Spanner x 1
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105

3
Assembly Instructions
Step 1
Step 2
Attaching legs
Attaching stretcher
Position the stretcher
between the legs as
shown. Align holes and
fix using bolts .
Position the upper leg
and lower leg as
shown. Align holes and
fix using bolt & nut .
Important:
Tighten bolts
using allen key
but do not fully
tighten at this
stage.
B
B
A
A
A
A
E
C
C
4
4
4
4
3
3
3
2
2
2
3
3
B
C
A
A
Important:
Tighten bolt
and nut using
allen key and
spanner but do
not fully tighten at
this stage.
E
F

4
Place the leg frame on a
flat surface.
Fully tighten bolt and
nut assembled in step
1 first using allen key
and spanner .
Carefully make
adjustments to the leg
frame to ensure the legs
are flat even on the floor.
Then fully tighten bolts
on stretcher using
allen key .
Assembly Instructions
Step 3
Assembly is complete.
A
B
C
F
E
4
2
2
3
Step 4
Aligning the legs
E
Place the seat face
down on a flat protected
and raised surface.
Position the leg frame on
the seat as shown. Align
the holes and fix using
bolts and curved
washers . Tighten the
bolts using allen key .
Carefully turn over the
bar stool.
A
Important:
Do not over
tighten bolt .
A
E
1
D
Attaching seat
4
4
1
1
3
A
A
DD
A
D
A
D
D
A
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 640 0800