Argos 482/0688D User manual

Hygena Cubic Wood Glass Low SB/TV Unit
Dimensions
Width - 120cm
Depth - 38cm
Height - 61.8cm
Issue 1 - 16/09/15
Important –Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Assembly Instructions- Please keep for future reference 482/0688D

1
Note: if require the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Remove all fittings from the
plastic bags and separate them
into their groups.
Safety and Care Advice
Important– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 & 3.
• Keep children and animals
• Make sure you have enough
space to layout the parts before
starting.
away from the work area, small
parts could choke if swallowed.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• • •
•
•
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Glass safety– Take care when handling glass, please follow the advice below
If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
Do not strike the glass with
hard or pointed items.
When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.

2
Components- Panels
Please check you have all the panels listed below
Top panel
(1200 x 380 mm)
Left side panel
(376 x 600 mm) (376 x 600mm)
123Right side panel
Left divider
(600 x 359mm)
Right divider
(600 x 359mm) (1078 x 60mm)
456Front top rail
Rear rail
(360 x 60mm)
Bottom panel x 2
(329 x 358mm) (548 x 337mm)
7
Left bottom rail
(359 x 60mm)
10 Right bottom rail
(359 x 60mm)
11 Adjustable shelf x 4
(339 x 327mm)
12
Left door
(474 x 355mm)
13 Right door
(474 x 355mm)
14 Glass shelf x 3
(359 x 355mm)
15
89Rear panel x 2

3
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Components- FittingsIf you have damaged or missing components,
call the Customer Helpline: 03456 400800
Please check you have all the fittings listed below
12mm Screw
x
16
A
B C
14 mm Screw x 16
Hinge x 4
D
E
Metal cam x 30
F
Shelf pin
x
16
14 mm Screw x 8
L
Ruler- Use this ruler to help correctly identifythescrews
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
Metal dowel
x
30
G
H I
J
K
Tools required
Phillips screwdriver
(medium & small)
Flatblade screwdriver
Cover pad x 30
Handle x 2
Corner block x 8
Wood dowel x 28
Shelf holder x 12
M
N
Large foot pad x 4 Small foot pad x 4

4
Assembly Instructions
Step 1
C
A
C
A
2
2
4
4
5
5
3
3
8
8
Step 2
2 3
5
Insert Wood dowels
into the indicated holes.
Screw 8 Metal dowels
into the threaded holes
in the Left and Right side
panels and Left
and Right divider
as shown.
4
A
C
Firmly push Right side
panel and Right
divider onto the ends
of Bottom panel ,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A
3
5
8
Firmly push Left side
panel and Left
divider 4 onto the ends
of Bottom panel ,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A
2
4
8

Screw 2 Metal dowels
into the threaded holes
in the Left and Right
divider as
shown.
5
Assembly Instructions
C
C
A
A
2
4
4
5
5
3
8
7
8
D
D
Note: Longer leg of
the cross on the
Metal Cams must
face towards end
of panel.
Step 3
Step 4
4 5
Insert Wood dowels
into the indicated holes.
A
C
Firmly push Left and
Right side piece from
Step 3 onto the ends of
Rear rail , ensuring
the Metal dowels and
wood dowels enter
corresponding holes.
C
A
7
Insert the 8 Metal cams
into the 8 holes on
the Bottom panels
so that they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of panels (as shown).
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
8
D
D

Screw 8 Metal dowels
into the threaded holes
in the Front top and
bottom rails
as shown.
6
CA
CA
Assembly Instructions
6
6
6
10
10
11
11
D
D
D
Step 5
Step 6
Taped end.
10
11
Taped edge.
Insert the 2 Metal cams
into the 2 holes on
the Rear rail so that
they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of rail (as shown).
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
7
D
D
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Front top
and bottom rails onto
the top edges of side
panels and dividers,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A

Slide Rear panels
into the grooves in the
side panels and dividers.
C
CA
1
1
1
D
D
D
D
D
D
D
D
7
Assembly Instructions
Step 7
Step 8
9
9
9
Insert the 8 Metal cams
into the 8 holes on
the side panels and
dividers so that they are
flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
metal dowels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
D
D
Screw 12 Metal dowels
into the threaded holes
in the Top panel as
shown.
1
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Top
panel onto the end
of side panels and
dividers, ensuring the
rear panels enter all
the grooves, and
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A

8
E
B
Insert the 12 Metal cams
into the 12 holes on
the side panels, dividers
and front rail so that they
are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
metal dowels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
D
D
Assembly Instructions
Step 9
Step 10
Screw 12 Shelf holders
onto the pre-drilled holes
in dividers using 12mm
Screws , make sure
the screws of the shelf
holders face downwards
as shown.
E
B
DD
D

Screw Handle to the
pre-drilled holes in the
rear face of the Door
using 12mm Screws .
Screw Hinges to the
pre-drilled holes in the
rear face of the Door
using 14mm Screws .
Repeat this step to
assemble Handle and
Hinges onto the other
door.
15
14
14
9
Assembly Instructions
Step 11
Step 12
B
B
F
H
J
J
Front
K
L
L
Push the top Glass shelf
into the Shelf
holders and secure
with the screws by
turning clockwise as
shown.
15
E
Repeat this step to
assemble the other two
glass shelves.
F
H
Peel off the cover of the
Foot pads , attach
to the bottom edges of
side panels and dividers
as shown.
Turn the unit upright.
K