Argos 389/6400 User manual

Chester - Solid Pine Desk
389/6400
Assembly Instructions- Please keep for future reference
Dimensions
Width - 120cm
Depth - 50cm
Height - 74,3cm
418/8124
If you need help or have damaged or missing parts, call t h e C u stomer Helpline: 03456 400 800.
Important – Please read these instructions fully before starting assembly

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
for
inserting screws,
This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
The product has been treated
with a wax and oil finish to
prevent dirt ingress and preserve
moisture.
On unpacking the
furniture you may notice an
odour due to this treatment;
this will disappear once the
furniture is unpacked and
assembled after a period of time.
This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer
to clothing or carpeted surfaces
during assembly.
Care and maintenance
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
From time to time check
that there are no loose
screws on this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
2
Top panel (120 x 50cm)
1 2 Right side panel (72,5 x 46,9cm)
3Division (72,5 x 45,8cm) Left side panel (72,5 x 45,8cm)
Right front frame
4
5
Left front frame
6
Large back rail x2 (67,1 x 8,5cm)
7Small back rail
8
Top front frame
9
Middle front frame
10 Bottom front frame
11
Drawer front x2
12
13 Drawer right side x2 14 Drawer left side x2 15 Drawer back x2
16 Drawer bottom x2
17 Side drawer runner x4
18 Back panel (68,3 x 44,3cm)
(37,3 x 8,6cm)
(37,3 x 4,7cm)
(72,5 x 4,6cm)
(72,5 x 4,6cm)
(37,3 x 4,7cm)
(35 x 20cm)
(35 x 20 cm)
(42,5 x 4,7cm)
(36,8 x 26,6cm)
(33,3 x 20cm)
(34.4 x 3,7cm)
(34,7 x 34,3cm)

3
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(medium & large)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
2m
A B C
Wooden dowel x 57 30mm Screw x 52 Drawer
handle x 2
D
Nail x 20
E
22mm Bolt x 4 Bracket x 6
F
G
16mm Screw x 12
Components - Fittings
Please check you have all the fittings listed below
If you have damaged or missing components,
Note:
fittings may be supplied than are required.
The quantities below are the correct amount to complete the assembly. In some cases more
call the Customer Helpline: 03456 400 800.

(4x)
(2x)
(2x)
(2x)
Step 2
Step 1
Assembly Instructions
4
10
09
3
2
7
8
11
17
13
14
A
A
A
A
A
AAA
A
A
A
A
A
A
A
A
B
B
B
B
B
B
A
A
A
A
A
A
A
B
B
B
B
B
B
Insert dowels into the
indicated parts.
A
Fixing runners.
17
17
17
17
4
3
17
Attach side drawer runners
to division using
screws .
Attach side drawer runners
to left side panel
using screws .
3
B
17 4
B
4
Attach brackets through
pre drilled holes on left
side panel and division
using screws
where shown.
F
G
4
3
(3x)
F
G
(3x)
F
G

Step 3
Assembly Instructions
5
Top
3
Step 4
Top
4
6
5
Insert right front
through joints.
a:
3
5
Fixing left front frame
to the left side panel
.
(Two people required for
an easier assembly)
Insert left front frame
into left side panel
through joints.
a:
6
4
(+)
(-)
(+)
(-)
(3x)
Yes!No!
G
4
6
(3x)
Yes!No!
G
3
5
Note:
Before fixing brakets
into place it is important
to ensure that the slot
and groove of parts
and are fully pushed
together and lined up
correctly at top and bottom.
F
4
6
Fix brakets into front
frame using screws .
G
Fixing right front frame
to division.
(Two people required for
an easier assembly).
Note:
Before fixing brakets
into place it is important
to ensure that the slot
and groove of parts
and are fully pushed
together and lined up
correctly at top and bottom.
F
3
5
Fix brakets into front
frame using screws . G
frame into division

Assembly Instructions
6
Step 6
3
B
B
Fixing the division
Two people are required
for an easier assembly.
Fit division to the
assembled part, then fix it
using screws .
3
B
4
Attention:
B
B
B
.
Step 5
Attach small back rail ,
top front frame and
bottom front frame to
left side panel using
Fit middle front frame
to left front frame .
Make sure panels are
correctly positioned as
shown in the diagram.
8
9
10
11
4
B
6
8
10
11
9
screws .

Assembly Instructions
7
Step 8
7
7
2
B
B
Fit large back rails
the right side panel
7
B
Fixing back rail.
to
2
then fix them using
screws .
Step 7
1
3
B
B
B
B
Fixing top panel
Two people are required
for an easier assembly.
Caution:
Carefully lay the top panel
on a soft and clean surface
to avoid damaging the
product.
Attach assembled frame
to the top panel using
screws .
1
B
Note correct
position of parts as shown.

Assembly Instructions
Step 9
7
7
B
B
3
1
7
Two people are required
for an easier assembly.
Fit back panels to
division and right side
panel to top panel
as shown. Then, fix the
parts using screws .
3
41
B
Step 10
18
D
Fixing back panel.
MUST
Important:
Desk be
square when back panel
is attached.
Attach the back panel
using nails .
D
18
8
4

Assembly Instructions
Step 11
Step 12
12
13
16 15
a: b: c:
d:
(2X)
B
B
B
B
E
C
d:Using screw attach
the drawer handle to
the drawer front.
Drawer assembly.
a:Attachdrawer sides
and to the drawer
usingscrews .
b:
B
E
C
16
12
13
15
B
14
front
c:
slide drawer bottom
into slots on drawer sides
attach drawer back
using screws .
Repeat step 11 to the
other drawer.
9
Insert drawers into unit.
With the back of the
drawers past the front
frames, use a hammer to
tap dowels in flush to
drawer sides.
stop drawer falling out.
A
This is a safety catch to
Assembly is complete.
AA
A
A
A
E
14
If you need help or have damaged or missing parts, call t h e A rgos Customer Helpline: 03456 400 800
or Homebase Customer Helpline: 0345 077 8888.