Argos Hygena Charlie 323/2349 User manual

Hygena Charlie Chair
Assembly Instructions - Please keep for future reference
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Issue 1 - 13/10/14
Dimensions
Width - 48cm
Depth - 54cm
Height - 83cm
323/2349
339/6852
hygena

• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product, this
could cause damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Do not stand on the chair.
• Do not use this chair as step
ladder.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Unit weight: 4.54kgs.
• Maximum safe weight of user:
110kgs.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Handy Hints
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the
bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.

2
Components - Parts
Please check you have all the parts listed below
If you have damaged or missing components, call the
Customer Helpline: Argos = 0345 6400800
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Components - Fittings
Please check you have all the fittings listed below
M6 x 25mm Bolt x 4
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Backrest
(48 x 54.5 x 43.5cm)
1Leg Frame
(42.5 x 43 x 39.5cm)
2
A
Washer x 4
B D
Allen key x 1
C
Spring washer x 4

3
Assembly Instructions
Step 1
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Attaching leg frame
Place the seat upside
down on a raised, flat
and protected surface.
Position the leg frame
on the seat as shown.
Secure using bolts and
washers / spring
washer then tighten
bolts using allen key .
Carefully turn over the
chair.
Assembly is complete.
A
B
D
C
1
1
A
B
C
A
B
CA
B
C
A
B
C
A
C
B
2
2
2
1