Argos 831/8701 User manual

C2 x Shelf
IMPORTANT
Simple Assembly Instructions - Please keep for future reference
1. Read these instructions carefully and
familiarise yourself with the procedure
before assembling the unit.
2. Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3. Take all the fittings out of the plastic bag
and separate them into their groups.
4. Ensure you have enough space to lay out
all the parts before assembly.
Brass / Chrome 2 Tier Bathroom Shelf
Components
5. To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
4-03
Fittings
A2 x Side
D2 x Rail
A2 x Screw B2 x Wall Plug C8 x Screw
4 x Plastic Plug
B
D8 x Nut
E1 x Spanner
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

fig. 4
Assembly Instructions Assembly Instructions
Stage 2 – Wall Mounting
Care and Maintenance
Stage 1 – Fitting the Unit
Safety
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
Fitting
From time to time please ensure there are no loose screws on the product.
Cleaning
As with all surfaces clean with a damp cloth and mild detergent, do not use bleach
or abrasive products.
1. Press the Plastic Plugs B firmly
into the ends of the Sides A. 
See fig. 1.
fig. 6
fig. 1
B
A
B
fig. 2
A
C
C
C
C
C
D
D
fig. 3
D
2. Use Screws Cand Nuts Dto fix
the Shelves C onto Sides A. 
See fig. 2.
Always make sure the unit is
secure.
3. Locate the Rail D into the unit. 
See fig. 3.
IMPORTANT: When drilling into
walls always check that there
are no hidden wires or pipes etc.
Make sure that the screws and
wall plugs supplied are suitable
for supporting the unit. Consult
a qualified tradesperson if you
are not sure.
A
A
B
AB
NOTE: It would be useful to ask
someone to help you at this
stage.
WALL MOUNTING: Hold the unit
against the wall in the desired
location and check if its
horizontal. Mark the wall through
the holes in the back and use
these marks to indicate where
to drill the holes. Insert the wall
plugs and then screw the
cabinet into place.
1. Use the Wall Plugs Bto fit to the
hole. Then use the Screws Ato
fix the unit onto the Wall. 
See fig. 5 and 6.
fig. 5
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor