Argos 875/3775 User manual

Understairs Storage Unit
Assembly Instructions -
Please keep for future reference 875/3775
Dimensions
Depth - 23.6cm
Width - 81cm
Height - 91.2cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Version2 Date: 26/11/12

Care and maintenance
• Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
rom the
plastic bags and separate them
into their groups.
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand on the product,
this could cause damage.
• Assemble the item as close to
room) as possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
r.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
1
• Do not use this item if any
components are missing or
damaged.

2
Components - Panels
Please check you have all the panels listed below
Top panel (20.8 x 23.5cm)
1
Bottom panel (79.5 x 23.5cm)
6
Small side panel x 4 (23.4 x 20.8cm)
2
Small shelf panel (39.5 x 23.5cm)
3Large side panel (91.2 x 23.6cm)
7
Central panel (59.5 x 23.5cm)
4
Large shelf panel (79.5 x 23.5cm)
5
If you have damaged or missing components,
call the Customer Helpline: 08456 400800

3
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
Components - Fittings
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
110 120 130 140 1500 10 20 30 40 50 60 70 80 90 100
0 1 2 3 4 5 6
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Ruler - Use this ruler to help correctly identify the screws
ABC
DEF
30mm Dowel x 850mm Screw x 18 39mm Locking pin x 4
Wall plug x 1
GH
14mm Screw x 1
Screw cover x 10
(This screw is
included in the
bag of wall strap)
x 1
Wall strap x 1
15mm Locking nut x 4

Step 1
Assembly Instructions
Step 2
Attaching small shelf
panel
b:
Use Locking pin and
Dowels to
Top panel .
the unit.
Small shelf panel onto
the Small side panel .
1
C
B
1
2
2
3
3
2
4
B
B
CD
A
A
B
B
C
D
A
A
a:
Insert Locking pin
as far as shown.
Do not over tighten.
Note:
2
3
Attaching central panel
a:
Use Locking pin and
side panel onto the
Small shelf panel .
2
C
B
Insert Locking pin
as far as shown.
Do not over tighten.
Note:
D
A
4
2
3
S
sp
D
n
Use a screwdriver to turn
Locking nut clockwise
to lock.
D
b:
Use Locking nut to
Central panel onto the
Small side panel .
A
4
2
D
Use a screwdriver to turn
Locking nut clockwise
to lock.
D
2
onto the
the Small
CD
C
D

Assembly Instructions
a:
Insert Locking pin
as far as shown.
Do not over tighten.
Note:
Use Locking pin and
side panel onto the
Large shelf panel .
C
B
2
a:
a:
Step 3
Attaching large shelf
panel
b:
2
2
B
B
C
B
B
C
5
4
Step 4
Attaching bottom panel
5
a:
Use Locking pin and
side panel onto the
Central panel .
C
B
Insert Locking pin
as far as shown.
Do not over tighten.
Note:
4
b:
Use Locking nut to
Large shelf panel onto
the Small side panel .
A
5
2
D
5
D
A
A
2
2
5
D
D
Continued on next page.
Use a screwdriver to turn
Locking nut clockwise
to lock.
D
the Small
the Small
C
D
C

Assembly Instructions
b:
Use Locking nut to
Bottom panel onto the
Small side panel .
A
6
2
D
6
4
3
1
5
b:
b:
b:
Use Screw covers
to cover the screw heads.
a:
7
2
A
A
A
AA
AA
A
A
A
A
A
E
E
Step 5
Attaching large side
panel
E
D
Step 4 - continued
6
a:
1
3
4
5 6
7
Use a screwdriver to turn
Locking nut clockwise
to lock.
D
A
D
Large side panel onto
the Top panel ,Small
shelf panel ,Central
panel ,
Large shelf panel
and Bottom panel .
6
E
E
E
E
E
E
E
E

Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly is complete.
Step 6
It is recommended that the
wall.
strap onto the back of
top panel.
With help, move storage unit
into position.
remove storage unit.
Drill a hole and insert Wall
plug .
Fixing to wall
Warning:
The storage unit is
heavy.
Lift with care.
Warning:
Before drilling,
check wall for
hidden pipes and
cables.
H
G
7
G
F
wall
H
Top panel
F
G
GGF
Note: Wall plugs supplied are
for solid wall only.
be used for your wall, seek
professional advice if in doubt
strap using Screw .
G
storage unit

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5:
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
responsibility of the installer.