Argos Avalon 4'6 User manual

634/2724
Assembly Instructions – Please keep for future reference
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 24/10/12
Avalon 4'6 and 5' Bed
Dimensions (4'6)
Length - 200cm
Width - 149cm
Height - 104cm
Dimensions (5')
Length - 210cm
Width - 164cm
Height - 104cm
634/2755
634/2786
634/2731
634/2762
634/2793

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
1
Care and maintenance
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Parts of the assembly will be
easier with 2 people.
• Make sure you have enough
space to layout the parts before
starting.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Dispose of all packaging
carefully and responsibly.
• Place the product on flat and
steady surface during use.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Keep these instructions for
further use.
• To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing points
be fully tightened.

Please check you have all the parts listed below
Components - Parts
Slat (Thread each end) x 4 (4'6- 142.1 X Ø1.9cm) (5'- 157.1 x Ø1.9cm)
9
10
Side rail x 2 (4'6- 98.4 x 10cm) (5'- 103.4 x 10cm)
7
Slat x 8 (4'6- 142.1 X Ø1.9cm) (5'- 157.1 x Ø1.9cm)
Side rail x 2 (4'6- 98.4 x 10cm) (5'- 103.4 x 10cm)
8
Support leg x 2
(29.8 x 7cm)
12
2
Central support x 2
(87.6 x Ø1.9cm)
11
Support leg x 4
(29.2 x Ø1.9cm)
13
Headboard corner post (right) (101 x Ø3.2cm)
1
Headboard corner post (left) (101 x Ø3.2cm)
2
Horizontal rail x 6 (4’6- 143×Ø1.9cm) (5'- 157 x Ø1.9cm)
3
Top rail (4'6- 148 x 8.2cm) (5'- 164 x 8.2cm )
6
Footboard corner post (right) (40 x Ø3.2cm)
4
Footboard corner post (left) (40 x Ø3.2cm)
5

Components - Fittings
B
Rubber washer x 8
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Plain washer x 8
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
C
D E F
G
30mm Allen screw x 4
Nut x 4
25mm Allen screw x 12
H
13mm Allen screw x 8
3
55mm Allen screw x 4
J
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6
Ruler/tape
measure
A
15mm Allen screw x 4
K
Allen key x 2
25mm Allen screw x 12

Step 1
4
Step 2
B
B
2
1
B
B
5
4
3
6
A
A
Assembly Instructions
Holes to face up
HEADBOARD
3
3
3
3
1
2
Assembling top rail
Assemble top rail to
the headboard assembly
using screws .
6
A
Assembling corner
posts
Lay headboard posts
and flat onto the floor
with the holes facing up.
Assemble horizontal rails
in between corner
posts and using
screws .
Note: Horizontal rails
fit inside the large holes
in posts and .
Repeat using footboard
corner posts and .
1
2
3
1 2
B
3
1 2
45
3
FOOTBOARD

Step 3
Assembly Instructions
5
C8
7
7
8
C
Step 4
Assembling slats
Assemble slats to
one side rail only, using
screws .
Note: Slats have a
thread in each end.
9
9
E
E
9
7
E
8
7
9
9
9
9
Assembling side rails
Assemble side rails
and together using
screws .
Repeat for the other side
rail.
7
8
C

Step 5
Step 6
Assembling bed base
With help, locate the
remaining side rail onto
the ends of the slats.
Secure using screws
into slats as shown.
E
Assembling slats
Locate slats into
the remaining holes in
the side rail.
Note: Slats have no
threads in the end and
do not require fixing.
10
10
E
7
8
10
10
10
10
10
10
10
10
7
8
6
Assembly Instructions
9
9
9
9
9

Step 7
AssemblingAssembling main frame
a: With help, assemble
side rails to the
headboard using fixings
, , and .
b: Assemble the
footboard to the side
rails using fixings ,
and .
c: Assemble support leg
to the underside of
the side rail using screws
.
Repeat on both sides.
F D G H
E
D G
12
C
D
5
7
G
E
b:
b:
C
12
c:
12
C
c:
EDG
8
7
a: H
DF
G
DF
H
G
8
2
a:
7
Assembly Instructions

Assembly Instructions
Step 8
Assembling slat
supports
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
J
11
9
10
13
Assemble central
supports and support
legs through slats
using screws .
Note: Central supports
fit underneath the
slats.
11
11
13
J
9
J
9
99
JJ
J
9
13
11
13
13
13
8