Argos Habitat AVR Wooden Barstool 600/5779 User manual

AVR Wooden Barstool
Assembly Instructions-Please keep for future reference
Width - 305 mm
Depth - 305 mm
Height - 595 mm
Dimensions
600/5779
Issue 1-27/07/13
If you need help or have damaged or missing parts, call the Customer Helpline : 08456 400800

Safety and Care Advice
Important - Please read these instructions fully before starting assembly.
-Check you have all the
components and tools
listed on page 2 .
-Remove all fittings from
the plastic bags and
separate them into their
groups.
-Keep children and animals
away from the work area,
small parts could choke if
swallowed.
-Make sure you have
enough space to layout
the parts before starting.
-Do not stand on the product,
this could cause damage.
-Assemble the item as close
to its final position(in the same
room) as possible.
-Assemble on the soft level
surface to avoid damaging the
unit or your floor.
-Parts of the assembly will be
easier with 2 people.
-We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
-Dispose of all packaging
carefully and responsibly.
-This maximum safe weight of
user : 110 kg.
Note:if required the next
page can be cut out and used
as reference throughout the
assembly.Keep this page with
these instructions for future
reference.
- Only clean using a damp
cloth and mild detergent,
do no use bleach or abrasive
cleaners.
- From time to time check that
there are no loose screws on
this unit.
-This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and Maintenance.
1
Care and Maintenance.
-Do not use this chair as a
step ladder.
-Use this product only for
seating one person at a
time.
-Do not use this chair
unless all bolts,screw
are firmly secured.
-At least every 4 months,
check all bolts, screw
to be sure they are tight.
-If parts are missing,
broken, damaged or
worn, stop use of this
product until repairs are
made & using factory
authorized parts.
-Failure to follow these
warnings could result in
serious injury.

Please check you have all the parts listed below.
Note: Components listed below are required for one chair only.
Left Side Frame
(30.5x58.1cm) Right Side Frame (30.5x58.1cm) Seat Pad (30x30 cm)
Short Stretcher x 2
(2x21.2cm) Long Stretcher x 2 (2x25cm)
1
4
3
5
2
Please check you have all the fittings listed below.
Note: The quantities below are the correct amount to complete the assembly for one chair. In some cases
more fittings may be supplied than are required.
Tool x1 Screw x 8 Wood dowel x 4
Components - Parts If you have damaged or missing components.
call the Customer Helpline: 08456 400800
Components - Fittings
2
A B C

Fitting the dowel
Insert Wood Dowel
into Seat Pad
1:
2:
3:
3
5
4
3
2
Assembling the leg frame.
-Fix Left Side Frame onto
Seat Pad
and Long Stretcher using
Screw tighten with Tool
-Turn the assembled barstool
upright.
1
5
4
3
Assembly Instructions
Step 1
Step 2
Step 3
3
If you need help or have damaged or missing parts,call the Customer Helpline :08456 400800
A
B
B
B
B
B
B
C
Assembling the leg frame
- Insert Short Stretcher
into the hole at
Right Side Frame.
- Fix Right Side Frame onto
Seat Pad using Screw
tighten with Tool
- Fix Long Stretcher onto
Right Side Frame using
screw tighten with Tool
Note:It would be useful to
ask some to help you
at this stage.
4
2
2
3B
A
5
2
B A
1
35
BA
A
3C