Argos Fairfield 852/5800 User manual

Fairfield 4ft6 Bed Frame Pine
Assembly Instructions - Please keep for future reference
Important – Please read these instructions fully before starting assembly
Issue -2 21/06/2018
Dimensions
Width - cm149,6
Length - cm206,4
Height - cm120
852/5800
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800

Note: if required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• This product contain natural
timber. You may notice some
variation in the grain and colour
of differente component parts
which is normal for furniture
produced using natural wood
and is not the result of any
manufacturing fault.
• The product has been treated
with a wax and oil finish to
prevent dirt ingress and
preserve moisture.
• On unpacking the furniture
you may notice an odour due to
this treatment; this will
disappear once the furniture is
unpacked and assembled after
a period of time.
• This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer to
clothing or carpeted surfaces
during assembly.
• Use an appropriate furniture
polish for natural wood furniture
and a dry cloth to clean the
product.
• Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
•We do not
recommend the
use of power
drill/drives for
inserting screws,
as this could
damage the unit. Only use
hand screwdrivers.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging
carefully and responsibly

Components - Panels
Please check you have all the panels listed below
2
01 Headboard (149,6x120cm)
02 Footboard (149,6x55cm)
03 Side Rail x2 (188x14cm)
05 Slats x26 (68,2x6,5cm)
04 Central Rail (197x6,5cm)
06 Middle Support x2 (30x6,5cm)

0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Phillips screwdriver
(medium & large)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
3
ED
14mm Screw x 08
40mm Wooden dowel x 04
A
130mm Bolt x 04
B
Half- oon ut x 04m n
F
35mm Screw x 52
G
50mm Bolt x 02
H I
Nut 1/4" x 02
J
80mm Headless bolt x 04
L
C
Allen key
M
32mm Bolt x 02
Washer x 04
Bracket x 02
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Components - Fittings If you have damage or missing components,
call the Customer Helpline: 03456 400 800.
Please check you have all the fittings listed below.
Tools required
Ruler - Use this ruler to help correctly identify the screws
N
Large Nut M8 x 04
P
Spanner
Q
Spacer 75mm x 02

Assembly Instructions
4
Step 1
Step 2
L
L
L
L
E
E
J
J
J
E
E
01 02
03
D
D
D
03
03
D
D
E
E
Fix metal brackets J into
pre drilled holes in the
headboard 01 and
footboard 02 using
screws E.
Screw headless bolt L to
footboard 02.
J
01
02
E
L
02
Fixing metal brackets
Insert dowels D into the
side rails 03.
03
D
Fitting dowels
L
L
50mm
L
L