Argos Verona 609/5057 User manual

Assembly Instructions - Please keep for future reference
Dimensions
Width - 60cm
Depth - 40cm
Height - 59.5cm
Important - Please read these instructions fully before starting assembly
issue 1 4/28/10
Verona Corner TV Unit
609/5057
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
610/3475

We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit. Only use hand
screwdrivers.
Warning: The unit weighs
approximately 11kgs.
Please lift with care.
●Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
●From time to time check that
there are no loose screws on this
unit.
●This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
Check you have all the
components and tools listed on
pages 2 and 3.
plastic bags and separate them
into their groups.
Remove all fittings from the
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand on the panels, this
could cause damage.
Assemble the unit as close to its
final position (in the same room)
as possible.
Assemble on a soft level
surface to avoid damaging the unit
or your floor.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging carefully
and responsibly.

Components - Panels
Please check you have all the panels listed below
2
Leg x 6 (19.3 x Ø3.5cm)
4
Foot x 2 (4.7 x 3.4cm)Ø
5
Table top (60 x 40cm)
1
Shelf x 3 (60 x 38.5cm)
2
Back panel (57.5 x 20cm)
3
Cap screw x 2
Components - Fittings
Please check you have all the fittings listed below
Ruler - Use this ruler to help correctly identify the screws
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Locking pin x 2Locking nut x 2
BC
Locking pin x 2
B
Tool x 1
E
50mm Screw x 6
D
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Ruler/tape
measure
Tools required
Pre-assembled at 5
If you have damaged or missing components,
call the Customer Helpline:08456 400800

Assembly Instructions
Step 1
Fitting the back panel
a:
5
A
Step 1
a: Unscrew Cap screws
a from the Feet .
A5
c: Use Screws to fix
the Back panel onto
the Shelf .
c:
b: Insert Legs into
the first Shelf , then
screw Feet into the
Legs.
2
3
4
5
3
2
D
D
b:
4
5
2
2
3

Assembly Instructions
Step 2
Fitting the shelves
a:
2
a: Carefully locate the
second Shelf onto the
unit.
b: Use Screws to fix
the second Shelf onto
the Back panel .
Screw in Legs to fix
the second Shelf onto
the unit.
b:
3
2
4
D
D
2
4
2
2
3
Continued on next page.
4

Assembly Instructions
Step 2 - continued
Fitting the shelf c:
2
c: Carefully locate the
third Shelf onto the
unit.
d: Use Screws to fix
the third Shelf onto
the Back panel .
Screw in Legs to fix
the third Shelf onto
the unit.
d:
2
3
D
2
2
3
4
4
2
D
5
4

Assembly Instructions
Step 3
Fitting the table top
a:
1
B
a: Screw Locking pins
into the Top panel .
B
1
b: Carefully locate the
Table top onto the
unit.
b:
1
1
B
Continued on next page.
6

Assembly Instructions
Step 3 - continued c: A
c: Screw Cap screws
to fix the Table top
onto the unit.
A
1
d: Use Locking nuts
to fix the Table top
onto the unit.
d:
1
C
1
C
C
1
C
7

Assembly Instructions
Assembly is complete.
Finally place the unit in
the desired location.
Step 4
Finishing the unit
Note: Before use always
make sure the unit is
secure.
8
If you need help or have damaged or missing parts, call the Customer Helpline : 08456 400800