Argos 600/6479 User manual

Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 10/09/12
600/6479
Assembly Instructions - Please keep for future reference
Width - 90cm
Depth - 50cm
Height - 75cm
Dimensions
Dining Table
600/6486

1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Warnings
Care and maintenance
• Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fittings.
• Discard all extra fittings and
keep fittings out of reach of
children.
• Assemble this product on a flat
surface.
• Assemble all parts loosely
before tightening any bolts.
• Unit weight: 7kgs.
• At least 2 people are required
to assemble this product.
• Retain Assembly Instructions
for future reference.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product should only be
used on firm, level ground.
• Make sure the legs remain in
contact with the ground.
• Do not stand on the product.
• Please clean the table surface
using either damp (not wet)
cloth and a mild domestic soap
solution or by using an
appropriate polish.
• Do not use any abrasive
materials when cleaning.
• From time to time check that
there are no loose bolts on this
unit.

2
Components - Parts
Please check you have all the parts listed below
Please check you have all the fittings listed below
Components - Fittings
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
B C
M6 x 40mm Bolt x 8 M6 x 32mm Bolt x 4 Allen key x 1
A
Ruler - Use this ruler to help correctly identify the screws
105 150 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
1Table top
(90 x 50 x 1.5cm)
2Leg frame x 2
(Ø2.5 x 50 x 74cm)
3Side rail x 2
(Ø1.3/0.5 x 75 x 11.5cm)

3
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly Instructions
Step 1
Step 2
Attaching leg frames
Attaching side rails
Place the top panel
on a flat protected
surface.
Position the leg frames
on the top panel
as shown. Align the holes
and fix using bolts .
Tighten bolts using allen
key .
Position the side rails
into the leg frames as
shown. Align the holes
and fix together using
bolts . Tighten bolts
using allen key .
Important:
Carefully turn
over the table. At
least two people
are required to lift
the table.
2
22
3
2
1
1
1
A
3
2
A
3
3
2
2
AA
A
A
AA
A
A
B
B
B
BB
1
2
B
C
C
Important:
Two persons are
required to hold
on the frames to
assist the
assembly.
Assembly is complete.