Argos 395/8953 User manual

395/8953
30cm
28cm
150cm
BASIC CABINET DRAWERS AND SHELVES
Issue 1- 30/03/15

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 2 and 3..
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
•Assemble the item as close
room) as possible.
•Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
•This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
•Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
tightend properly.
Handy Hints
• We do not
recommend the use
of power drill/drivers
for inserting screws,
as this could damage
the using. Only use hand
screwdrivers

1Top panel x 1
(30(w)cm x 28(d)cm)
Lower right side panel x 1
15 Lower back panel x 1
(87.7(w)cm x 29.8(d)cm)
16 Door panel x 1
(27.5(d)cm x 26.5(w)cm)
13 Drawer bottom panel x 2
(25.6(w)cm x 24.8(d)cm)
14 Upper back panel x 1
(59(w)cm x 29.8(d)cm)
6Shelf panel x 1
(30(w)cm x 28(d)cm)
7 Shelf panel x 2
(27.9(d)cm x 27(w)cm)
8 Cross bar x 2
(27(w)cm x 4(d)cm)
10 Drawer left side panel x 2Drawer front panel x 2
(26(w)cm x 20(d)cm)
11 Drawer right side panel x 2
(26(w)cm x 20(d)cm)
12 Drawer back panel x 2
(24(w)cm x 20(d)cm)
9
(27.5(d)cm x 26.5(w)cm)
2Upper left side panel x 1
(57(w)cm x 28(d)cm)
3Upper right side panel x 1
(57(w)cm x 28(d)cm)
3Lower left side panel x 1
(89.5(w)cm x 28(d)cm)
4
(89.5(w)cm x 28(d)cm)

35mm Male camlock x 28
45mm Screw x 4 30mm Screw x 8
16mm Bolt x 3
35mm Screw x 1
Washer x 2
Hinge x 2 Magnetic catch x 1 Magnetic catch plate x 1
14mm Screw x 2
Wall plug x 1 Drawer rail 250mm x 4
12mm Screw x 1
12mm Screw x 18
15mm Female camlock x 20
12mm Female camlock x 8
30mm Wooden dowel x 4
Knob x 3
N
PQ
Safety strap x 1
O
12mm Screw x 22
Drawer limiter x 4
20mm sticker x 4
R
TU
SV

Connect the male
camlock as directed in
the assembly instructions
using a screwdriver.
Push the male camlock
into the entry hole.
lnsert the female
camlock as shown in the
instructions
Note: ensure that the
Turn the female camlock
clockwise with a
arrow on the top of the
camlock points towards
the entry hole for the
male camlock.
screwdriver.
You should feel a click
when the camlock is
locked in place.
The joint is now secure.
Using Camlocks

Insert 16 x male camlock
into top panel , shelf
panel , 2 x drawer front
panel as shown.
Insert 4 x male camlock
into upper left side
panel and upper right
side panel as shown.
Insert 8 x male camlock
into lower left side
panel and lower right
side panel as shown.
Fix 4 x drawer rail to
them using 8 x 12mm
screw on them as
shown.
A1
6
9
A
A
Q
G
2
3
4
5
A
T
U1
A
6
A
9
A
3
A
2
A
G
Q
5
A
G
Q4
x 2

Attach shelf panel to
upper right side panel
using 2 x 15mm female
camlock as shown.
Tighten female camlocks
with a screwdriver.
Please refer to the “Using
Camlocks” section at the
front of this instruction for
further assistance.
B
7
3
Attach upper left side
panel to shelf panel
using 2 x 15mm female
camlock as shown.
Tighten female camlocks
with a screwdriver.
B
27
Attach top panel to
the upper left side panel
and the upper right
side panel using 4 x
15mm female camlock
as shown.
Tighten female camlocks
with a screwdriver.
Attach shelf panel
to the the upper left side
panel and the upper
right side panel
using 4 x 45mm screw
as shown.
B
D
2
2
3
6
3
1
37
2
1
6
B
B
B
D

Attach 1 x shelf panel
to lower right side panel
using 2 x 15mm
female camlock as
shown.
Tighten female camlocks
with a screwdriver.
Insert 2 x wooden dowel
into 2 x cross bar
and attach them to the
lower right side panel
using 2 x 15mm female
camlock as shown.
Tighten female camlocks
with a screwdriver.
B
C
B
7
8
5
5
Insert 2 x wooden dowel
into 2 x cross bar
as shown.
Attach lower left side
panel to assembled
part using 4 x 15mm
female camlock as
shown.
Tighten female camlocks
with a screwdriver.
Connect the assembled
upper part to the
assembled lower part
using 4 x 15mm female
camlock as shown.
Tighten female camlocks
with a screwdriver.
C
B
B
8
4
7
8
7
4
5
B
B
B
B
B
C
C
C
C
8
8

14
15
F
F
E
J
I
10
9
12
13
11
Attach upper back panel
and lower back panel
to the assembled
part using 22 x 12mm
screw as shown.
F
Attach 1 x drawer left side
panel and 1 x drawer
right side panel to
1 x drawer back panel
using 4 x 30mm screw
as shown.
Insert 1 x drawer bottom
panel into the grooves
of the drawer left side
panel and the drawer
right side panel , and
slide it into the groove of
the drawer back panel
as shown.
Attach 1 x drawer front
panel to the assembled
part of drawer using
4 x 12mm female camlock
as shown.
Tighten female camlocks
with a screwdriver.
Attach 1 x knob to the
drawer front panel
using 1 x bolt as shown.
Repeat above steps to
assemble the other
drawer.
10
11
12
E
I
J
10
11
9
9
12
13
H
H
14
15
x 2

Fix unit to wall using 1 x
12mm screw , 1 x
safety strap , 2 x
washer , 1 x 35mm
screw and 1 x wall plug
as shown.
L
M
N
O
P
Insert the assembled
Fix 1 x magnetic catch
plate to the door panel
using 2 x 12mm screw
and fix 1 x knob to
it using 1 x bolt as
shown.
Attach the door panel
to the upper right side
panel using 2 x hinge
and 8 x 12mm screw
as shown.
drawers into the chest
and make sure 4 x drawer
rail inserted into the
grooves of the drawer
side panel and ,
then insert 4 x drawer
limiter into the holes of
the drawer side panel
and as shown.
Gently tighten the middle
4 x female camlocks and
paste 4 x 20mm sticker
over the holes
of them as shown.
10 11
10
11
Q
K
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800
Argos LTD. 489-499 Avebury boulevard, Central Milton Keynes, MK9 2NW
R
K
R
G
J
GI
S
N O M P
L
O
M
V
V
G
S G
I
J
16
16
3
16