Argox AME-3230B User manual

1
AME Series User’s Manual
AME-3230
AME-3230B
AME-3230W
MOBILE PRINTERS
USER’S MANUAL
Oct. 01, 2018
Revision 9.0
Website: http://www.argox.com
Address: 7F, No. 126, Lane 235, Pao-Chiao Rd., Hsin Tien,
Taipei, Taiwan, R.O.C.
Argox Information Co., Ltd
Ribbon & Media Installation
video

2
AME Series User’s Manual
Table of Contents
Proprietary Statement .................................................................4
Safety.............................................................................................6
Getting Started.............................................................................7
Unpacking Printer......................................................................7
Package Contents....................................................................8
Printer Overview........................................................................9
Battery......................................................................................10
Installing the Battery.............................................................10
Charging the Battery.............................................................12
Battery & Power Notifications .............................................13
Loading Media.........................................................................14
Wearing Belt Strap...................................................................17
Controls & Connections............................................................23
Self-Test before Connecting.....................................................23
Printer Controls and Indicators................................................24
Smart Battery Power Management..........................................25
Connecting the Printer .............................................................27
Drivers & Software..................................................................28
Troubleshooting..........................................................................28
Printer Status Indications .........................................................28
Performing Calibration ............................................................30
Printing a Configuration Report...............................................30
Printer Maintenance..................................................................33
Print Head Maintenance Guide................................................33
Cleaning the Media Sensor:.....................................................34
Specifications..............................................................................35
General Specifications .............................................................35

3
AME Series User’s Manual
Interface Specifications............................................................39
Serial Interface:.....................................................................39
USB Interface: ......................................................................40
Bluetooth Interface: ..............................................................40
Wi-Fi (802.11 b/g) Interface:................................................41

4
AME Series User’s Manual
Proprietary Statement
This manual contains proprietary information of Argox Information Co., Ltd. It is
intended solely for the information and use of parties operating and maintaining the
equipment described herein. Such proprietary information may not be used,
reproduced, or disclosed to any other parties for any other purpose without the
expressed written permission of Argox Information Co., Ltd.
Product Improvements
Continuous improvement of products is a policy of Argox Information Co., Ltd. All
specifications and signs are subject to change without notice.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into a different outlet on a different circuit.
Consult the dealer or an experienced Radio/TV technician for help.
This unit was tested with shielded cables on the peripheral devices. Shielded cables
must be used with the unit to insure compliance. The user is cautioned that any
changes or modifications not expressly approved by Argox Information Co., Ltd.
could void the user’s authority to operate the equipment.
Liability Disclaimer
Argox Information Co., Ltd. takes steps to assure that the company’s published
engineering specifications and manuals are correct; however, errors do occur. Argox
Information Co., Ltd. reserves the right to correct any such errors and disclaims any
resulting liability. In no event shall Argox Information Co., Ltd. or anyone else
involved in the creation, production, or delivery of the accompanying product
(including hardware and software) be liable for any damages whatsoever (including,
without limitation, damages for loss of business profits, business interruption, loss of
business information, or other pecuniary loss) arising out of the use of or the results
of use of or inability to use such product, even if Argox Information Co., Ltd. has been
advised of the possibility of such damages.

5
AME Series User’s Manual
RF exposure warning
·
The equipment complies with FCC RF exposure limits set forth for an uncontrolled
environment.
The equipment must not be co-located or operated in conjunction with any other
antenna or transmitter.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

6
AME Series User’s Manual
Safety
Supplemental Information: This device complies with the requirement
of FCC Part 15 Rules. Operation is subject to the following two
Conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference
that may cause undesired operation.
Please only use adapters with the following electrical characteristics and
certified by current legislation. Using other adapters may damage the
device and void the warranty, and pose risks to the user.
Specifications Input: 100-240VAC, 50-60Hz, 1.0 A
Features Output: 9VDC, 1.56A
The manufacturer declares under sole responsibility that this product
conforms to the following standards or other normative documents:
EMC: EN 55022:2010 class A
EN 55024:2010
The user is cautioned that any changes or modifications which are not recommended by
Argox Information Co. Ltd. could result in the loss of the user's authority to operate the
equipment. To ensure compliance, the users must use accessories and peripherals
approved by Argox Information Co. Ltd.
Argox Information Co., Ltd certifies that the following products and/or
components are compliant with the current requirements of the European
Union Restriction on the use of Hazardous Substances (RoHS) Directive,
2011/65/EC.

7
AME Series User’s Manual
Getting Started
Congratulations on choosing AME series mobile printer, made by
Argox Information Co., a leader in the worldwide barcode industry.
AME series are ideally designed to bring more efficiency to your
business. This manual will help you get to know your new printer and
provide you with the required information.
Unpacking Printer
After receiving your printer, please check for any shipping damage.
Inspect the outside of both the box and the printer for possible
damage.
1. Open the top cover of the printer to check that the media
compartments are in order.
2. Check whether you have received the following accessories
together with the printer. If there are any items missing,
please contact your local dealer.
Note: If shipping damage is discovered, contact your
shipping company immediately to file a claim.

8
AME Series User’s Manual
Package Contents
Printer
Power Supply
Battery
Belt Strap & Screw
Sample Media
Media Shield
Print head Cleaning Pen
Quick Installation Guide
DVD

9
AME Series User’s Manual
Printer Overview
Power
Button
Feed Button
Communication
LED
Power LED
Battery LED
Media LED
USB/RS-232 Port
Power Input Jack
Latch Release Button
Platen Roller
Media
Sensor
Media Cover
Print Head
Media Shield

10
AME Series User’s Manual
Battery
Each printer package contains one battery pack. The battery must be
installed for the printer to work, even if the Power Supply is connected.
You must fully charge the battery before using the printer for the first
time.
Installing the Battery
1. To release the Battery Cover, rotate the Battery Cover Latch 90°
to the right as shown below:
Note: We recommend using a coin to rotate the latch.
2. Remove the Battery Cover and install the Battery Pack into the
Battery Cover
Battery Cover Latch
90°

11
AME Series User’s Manual
printer:
2. Replace the Battery Cover and rotate the Battery Cover
Latch 90°to lock in place:
90°

12
AME Series User’s Manual
Charging the Battery
1. After installing the Battery Pack, connect the Power Supply into
the printer’s Power Input Jack.
2. Then plug the Power Supply into the AC wall receptacle. The
printer’s Battery LED will remain yellow during charging.
Power
Supply
Power Jack
Power Input Jack

13
AME Series User’s Manual
3. The battery is designed for fast-charge; after about 3.5 hours
(210 minutes), the Battery LED will turn off, signifying that the
battery is fully charged and ready for use.
Battery & Power Notifications
1. Do not disassemble the Battery Pack in case of malfunction.
2. Keep the Battery Pack and printer away from fire, liquids, and
conductive material, for your own safety and to avoid possible
damage.
3. Be sure only to use the Power Supply and Battery Pack provided
or approved by Argox.
4. Any damage caused by abnormal use will void the warranty.
5. When the battery not used in long-term, maintained of power at
50% and stored at -20 ~ 25 °C.
Note: Operating the printer when charging will increase
charging time. Wait until battery is fully charged to
operate the printer.

14
AME Series User’s Manual
Loading Media
1. Press the Latch Release Button on printer to automatically open
the Media Cover:
2. Place the media supply roll into the Media Compartment. Make
sure media supply unwinds near Print Head, as in the direction
shown below:
Latch Release Button

15
AME Series User’s Manual
3. For media supply rolls with width less than 3 inches:
Load media supply first, and then align media supply roll to the
right end for correct detection of Media Sensor:
4. Install the Media Shield into Media Compartment, and lean
closely against the media supply roll:
Media Sensor
Media
Compartment
Print Head

16
AME Series User’s Manual
5. Pull a short length of media out of the printer. Close the Media
Cover and press until you hear a click, to properly latch:
Media Cover
Media Shield

17
AME Series User’s Manual
6. Tearing Media:
To tear media, pull the media edge against the Tear Bar as in the
direction below:
Wearing Belt Strap
The convenient Belt Strap design, a standard feature of Argox AME
series, is easy to use and quick to install:
1. Prepare the Belt Strap and the Screw.
Locate the Knob on the underside of the printer, right above the
Battery Cover:
Tear Direction
Tear Bar

18
AME Series User’s Manual
Screw
Belt Strap
Knob

19
AME Series User’s Manual
2. Attach the Belt Strap onto the Knob.
Note that the exterior surface of the Belt Strap should face toward
you:
Knob
Belt Strap

20
AME Series User’s Manual
3. Insert the Screw onto the Knob, through the Belt Strap, and
tighten clockwise until it is fully secured: