Aries 2156050 User manual

PAGE 1 • 2156050-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Parts List
1Angular brush guard
8Flat washer, M6
8Lock washer, M6
Tools Required
Ball screwdriver, 5mm
Scan
for helpful
install tips
INSTALLATION MANUAL 2156050
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 2156050-INS-RA • PAGE 2
Step 1
The bumper will come with pre-installed
M6 socket head cap screws.
Remove all eight cap screws
from the bumper.
Step 2
Place one M6 flat washer and one M6
lock washer on each of the cap screws.
Rest the angular brush guard on
the bumper and align the slots with
the holes in the bumper.
Step 3
Starting with one screw on either side.
Attach the angular brush guard by
screwing in each of the socket
head cap screws.
Snug the hardware. Do not tighten
Step 4
Make sure the angular brush guard
is level and tighten all hardware.
Congratulations on the installation of
your new ARIES angular brush guard.