Arjo Maxi Sky 1000 User manual

2
Pull each leg strap under the thigh so that it
emerges on the inside of the thigh.
Approach the patient with the lift.
Place the spreader bar in sitting position.
Place the spreader bar at or just below shoulder
level.
Place the spreader bar close enough to
be able to attach the shoulder straps.
1
Place the sling around the patient,
with the base of the sling slightly
below the tail bone.
For sling with head support extend
to top of patient’s head.
Lift from seated position
3
Loop sling
Place attachment loop on the
hook.
Make sure the safety latches are
closed and the sling strap is
completely inside the hook.
Connect the sling loops to the spreader bar.
Attach shoulder straps then leg straps.
Raise the patient, proceed with the transfer.
Lower onto new location. When body
weight is fully supported detach loops.
4
001-01392-EN Rev 0 • 06/2020 • Page 1/4
QUICK REFERENCE GUIDE - USE
Maxi Sky 1000

3
Loop sling
Place attachment loop on the hook.
Make sure the safety latches are closed and
the sling strap is completely inside the hook.
2
Roll the patient back onto the sling and then roll the patient in the
opposite direction, so that the folded part of the sling can be
straightened out.
Approach the patient with the lift.
Place the spreader bar close enough to be able to attach the
shoulder straps.
Attach the sling loops to the spreader bar.
Attach shoulder straps then leg straps.
Raise the patient, proceed with the transfer.
Lower onto new location. When body weight is fully supported
detach loops.
4
1
Roll the patient onto their side. Fold the
sling in half and place it on the bed along
the back of the patient.
For sling with head support extend to top of
patient’s head.
001-01392-EN Rev 0 • 06/2020 • Page 2/4
Transfer from supine position

001-01392-EN Rev 0 • 06/2020 • Page 3/4
3
Connect the sling loops to the spreader bar.
Raise the patient in a semi-reclined
position for the transfer.
Proceed with the transfer.
1
Place the sling around the patient, with the
base of the sling slightly below the tail bone.
For sling with head support extend to top of
patient’s head.
Pull each leg strap under the thigh so that it
emerges on the inside of the thigh.
Lower onto new location. When body
weight is fully supported detach loops.
4
Lift from seated position - Bariatric sling application
2
Loop sling
Place attachment loop on the
hook.
Make sure the safety latches are
closed and the sling strap is
completely inside the hook.

ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 001-01392-EN Rev 0 • 06/2020 • Page 4/4
3
Loop sling
Place attachment loop on the hook.
Make sure the safety latches are closed and
the sling strap is completely inside the hook.
2
Roll the patient back onto the sling and
then roll the patient in the opposite
direction, so that the folded part of the
sling can be straightened out.
Approach the patient with the lift.
Place the spreader bar close enough to
be able to attach the shoulder straps.
Attach the sling loops to the spreader bar.
The straps must be brought under the thighs. This may involve
lifting one leg at a time, and may mean lowering the spreader bar
a little more.
Raise the patient in a semi-reclined position for the transfer.
Lower onto new location. When body weight is fully supported
detach loops.
4
1
Roll the patient onto their side. Fold the
sling in half and place it on the bed along
the back of the patient.
For sling with head support extend to top of
patient’s head.
Transfer from supine position - Bariatric sling application