Arjo Sara Combilizer User manual

Activates Standing mode.
Activates Normal mode.
Normal mode - moves chair or stretcher upwards.
Standing mode - raises stretcher into tilt table position.
Normal mode - moves chair or stretcher downwards.
Standing mode - lowers tilt table into stretcher position.
Normal mode - changes from stretcher into chair position.
Standing mode - not available.
Normal mode - changes from chair to stretcher position.
Standing mode - not available.
Normal mode - Left arrow - tilts chair or stretcher upwards into horizontal position.
Standing mode - not available.
Normal mode - Right arrow - tilts chair backwards or tilts stretcher back to Trendelenburg.
Standing mode - not available.
Normal mode - tilts chair or stretcher left.
Standing mode - tilts the tilt table left.
Normal mode - tilts chair or stretcher right.
Standing mode - tilts the tilt table right.
Control panel Hand control
08.KC.02EN_4 • 05/2020 • Page 1/2
Sara Combilizer
QUICK REFERENCE GUIDE - CONTROLS

Hold the side of the calf section frame and manually lift the calf section upwards (1) until it latches in the hori-
zontal (vascular) position (2). Use the caregiver controls or ACP to lower the thigh section to the angled
(Fowler) position.
Chair – Up or Down
Stretcher – Up or Down
Stretcher to tilt table –
Tilt table to stretcher
Tilt chair back –
Tilt chair upright
Stretcher to chair –
Chair to stretcher
Stretcher to Trendelenburg –
Trendelenburg to stretcher
Tilt left or right
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 08.KC.02EN_4 • 05/2020 • Page 2/2