Aseptico ADU-03ST Manual

ADU-03ST Manual Dental Control System
HVE and Saliva Ejector options
OPERATION and MAINTENANCE
INSTRUCTION MANUAL

i.
TABLE OF CONTENTS:
Specications ........................................................................ 2
Package Contents & Options ................................................ 3
Introduction............................................................................ 3
Setting Up the Unit ................................................................ 3
Figure 1 - Case Contents................................................. 3
Figure 2 - ADU-03ST Setup ............................................. 3
Remote Setup........................................................................ 4
Figure 3 - Vacuum Systems Quick Connects................... 4
Operation Functions .............................................................. 4
Figure 4 - Operation Functions ........................................ 4
Unit Operation ....................................................................... 5
Figure 5 - Air/Water Syringe............................................. 5
Cleaning ................................................................................ 5
Warranty ................................................................................ 6
Notes ..................................................................................... 6
SPECIFICATIONS:
Case Size: 11 in. x 11 in. x 40 in.
Case Weight: 17 lbs.
Power Source: 80 - 100 PSI Compressed Air
P.O. Box 1548 • Woodinville, WA 98072
8333 216th Street S.E. • Woodinville, WA 98072
International [phone] • Toll Free(800) 426-5913
www.aseptico.com • [email protected]
To prevent injury to people and damage to property,
please heed relevant warnings and remarks. They are
marked as follows:
• WARNING: Serious injury or death may result if
ignored.
• CAUTION: Damage to property or the
environment may result if ignored.
• NOTE: Important additional information and hints.

3.
The Aseptico ADU-03ST is one of the nest high volume
evacuator systems available to the professional. O󰀨ering manual
activation and a remote stand, the ADU-03ST provides an
economic HVE control system for a dental operatory, hygienist’s
room, or satellite o󰀩ce.
Congratulations!
This system is engineered to provide many years of reliable
service. Please read the instructions provided in this manual
to receive the best and longest service from your Aseptico
equipment.
Separate manuals may be provided to cover the operation and
maintenance of hand-pieces or other accessories for your unit.
Handpieces are purchased separately.
PACKAGE CONTENTS:
• TA-90D 3-Way Air/Water Syringe with Tips
• NWS-8 Self Contained Clean Water System
• 25-Foot Extension Line
• AA-61 Water Connector for scalers
Options:
• AA-25ST Saliva Ejector System
• AA-21ST High Volume Evacuator
SETTING UP THE UNIT:
FIGURE 1 - Case Contents
WATER SUPPLY
BOTTLE
AA-25ST SALIVA
EJECTOR ASSEMBLY
(OPTIONAL)
25 FOOT
EXTENSION LINE
SYRINGE AND
TUBING
AA-21ST HVE
COLLECTION
CONTAINER*
(OPTIONAL)
AA-21ST HVE
HOSE ASSEMBLY*
(OPTIONAL)
AA-61 WATER CONNECTOR
FOR SCALER
FOLDED TRIPOD
ACCESSORY
TRAY
BOTTLE BRUSH
* HIGH VOLUME EVACUATOR
1. The ADU-03ST comes factory-mounted on a tripod stand.
2. Remove the system from the carrying case (Fig. 1), fully
extend tripod legs, and stand the system up (Fig. 2).
3. Unit height is adjusted by loosening the adjustment handle
on tripod, raise or lower system, then tighten adjustment
handle.
FIGURE 2 - ADU-03ST Setup
AA-21ST HVE
(OPTIONAL)
AA-25ST
SALIVA
EJECTOR
(OPTIONAL)
TRIPOD
HEIGHT
ADJUSTMENT
HANDLE
CARRYING
CASE
FULLY EXTED
TRIIPOD LEGS

4.
REMOTE SETUP:
1. Remove components from the soft carrying case as required. Note
item locations to ease repackaging.
2. Attach one end of the 25 ft. grey extension line to the grey air supply
line from the unit. Connect the other end to a clean regulated 80-100
PSI compressed air supply.
3. Locate the white plastic water supply bottle in the soft carrying case.
Fill the bottle with clean or sterile water and attach it to the white
tting on the underside of the ADU-03ST.
4. Optional AA-25ST Saliva Ejector System - The Saliva Ejector
System consists of a plastic waste container and a single low-
velocity hose. Mount the waste container to the quick connect on
the mounting block located on the back left-hand side of the chassis
(see Fig. 3). Push the waste container straight up into the Quick
Connector, until the snap ring locks it into place. Attach saliva ejector
hose to the quick connect located on top of waste container and
then place ejector valve into the holder located on left side of unit. To
remove waste container assembly, push in on snap-ring tab and pull
the assembly out of Connector.
FIGURE 3 - HVE & Salive Ejector Connectors
Quick Connectors
Snap Ring
AA-21ST
HVE System
(Optional)
AA-25ST
Saliva Ejector
(Optional)
5. Optional AA-21ST HVE System - The High Volume Evacuator
consists of a plastic waste container and a single large-diameter low
velocity hose. Mount the waste container and hose assembly to the
quick connect on the mounting block located on the back right-hand
side of the chassis (see Fig. 3), then place HVE valve in the holder
on the right side of unit. To attach the assembly, push the waste
container and hose assembly straight into the Quick Connector, until
the snap ring locks it into place. To remove assembly, push in on
snap-ring tab and pull the assembly out of Connector.
6. Slide the accessory tray between the ADU-03ST chassis back and
the mounting block.
OPERATION FUNCTIONS:
FIGURE 4 Saliva Ejector
ON/OFF Toggle
(Optional) AA-21ST High
Volume Evacuator
(Optional)
AA-21ST HVE
Collection
Container
(Optional)
AA-25ST
Saliva Ejector
(Optional)
3-Way
Syringe
AA-25ST
Collection
Container
(Optional)
AA-61
Water Out
Connector
Water Supply Bottle
Pressure Gauge:
Gives a visual indication of the system pressure.
3-Way Air /Water Syringe:
Delivers air, water, or a combination mist. Supplied with
autoclavable tip.
NWS-8 Water System:
White 1-liter bottle dispenses water through the 3-Way Air/
Water Syringe and high-speed handpiece.
AA-25ST Saliva Ejector On/O󰀨 Toggle (Optional):
Turns vacuum On/O󰀨 to the saliva ejector valve.
AA-21ST High Volume Evacuator (Optional):
Provides vacuum ow to the High Volume Evacuator when
the HVE valve button is depressed.
AA-61 Water Out Connector:
Provides water via standard 1/4” quick disconnect to
independent Cavitron or scaler units requiring a water supply.
Remove the black rubber cap, then connect water line to this
connector. FOR WATER OUT CONNECTIONS ONLY!

5.
UNIT OPERATION:
3-Way Air/Water Syringe:
Depress the right button for air operation, and the left button
for water operation. Depressing both buttons will create a
mist. The syringe features quick-change autoclavable tips:
To remove a tip, press on the locking collar surrounding the
tip socket and pull the used tip straight out of the socket (see
Fig. 5). To insert a new tip, press locking collar and push tip
into socket as far as it will go. Release collar and gently tug
on tip before using to ensure that tip is securely locked into
socket.
DEPRESS LOCKING
COLLAR
FIG. 5
Optional Saliva Ejector:
Remove the saliva ejector valve from its holder and insert
a standard saliva ejector tip. Turn the low vacuum toggle
switch ON. Waste from the vacuum system will collect in the
attached plastic bottle. When the waste container is 3/4 full, it
must be emptied to prevent a back-up in the system.
Optional HVE System:
Remove the vacuum hose from its holder and insert a
standard oral evacuator tip. Depress the button switch on the
side of the HVE valve for vacuum. Waste from the vacuum
system will collect in the attached plastic bottle. When the
waste container is 3/4 full, it should be emptied.
CLEANING:
Syringe Tip Sterilization:
1. Remove contaminated syringe tip.
2. Remove all visible signs of contamination before autoclaving.
3. Autoclave tip at 132° C (270° F) for ten minutes.
4. Sterilize between each patient use.
NOTE: Since only the tips can be autoclaved, it is recommended
that the Air/Water Syringe be bagged with a disposable, single-
use plastic sleeve between each patient use.
Saliva Ejector:
The valve assembly on the saliva ejector snaps apart at the
swivel. After each use, the vacuum system should be cleaned
by running clean water or vacuum system cleanser through the
evacuator hose.
HVE System:
After each use, the high volume evacuator system should be
cleaned by running clean water or a vacuum system cleanser
through the evacuator hose.
Vacuum System Waste Bottles:
Waste from the vacuum systems will collect in their respective
plastic waste bottles. When the waste containers are 3/4 full, they
should be emptied. After each use, the vacuum systems should
be cleaned by running clean water or a vacuum system cleanser
through the evacuator hoses. CAUTION: Use only NON-foaming
cleansers in the vaccum lines. Thoroughly clean the waste
bottles.
Water Lines:
Disinfect the water lines weekly. Prepare a 1:10 bleach solution (1
part household bleach to 10 parts water). Remove water reservoir
and discard residual water. Replace empty water supply tank and
air purge all waterlines. Fill water supply tank with bleach solution.
Run bleach solution through all lines. Allow bleach solution to
stand in lines for 10 minutes. Remove water supply tank and
discard bleach. Flush water supply tank and all lines thoroughly
with clean water. Air purge and leave lines dry until next clinical
use.

6.
WARRANTY:
Aseptico Inc. warrants its new products against defects in material and
workmanship under normal and proper use, care, and maintenance for a
period of two (2) years from date of original invoice. This two (2) year warranty
does NOT apply nor is it extended to products that are not manufactured by
Aseptico. These products may be covered by a separate limited warranty
provided by the particular manufacturer, and all claims and questions
regarding the same are to be directed to the particular manufacturer.
Expendable components, such as batteries, fuses, light bulbs, and tubing
sets installed on Aseptico products are specically excluded and have no
warranty. Consumable goods are warranted for the stated expiration date
of such goods.
Repair or replacement of any product(s) or part(s) under this warranty
does not extend the term of this warranty, and such product(s) or part(s)
shall remain covered by the unexpired portion of the warranty period, or for
ninety (90) days from the date of return to Aseptico, whichever is later. This
limited warranty applies only to the initial or rst installation of the product
or part.
During the specic warranty periods set forth above, Aseptico will, at its
option, repair or replace the product(s) or particular part(s) that are found
to be defective in either material or workmanship in part or whole. Aseptico
shall be the sole arbiter of such action. In the event of alleged defect
under warranty, the purchaser is to notify Aseptico’s Customer Service
department promptly. Customer Service will provide Return Material
Authorization (RMA) instructions, usually directing that the product be
returned for service, shipping prepaid by the buyer or end user, to Aseptico
or its designated and authorized warranty service center.
This warranty shall not apply to products (1) that have been subjected to
neglect, abuse, misuse, improper installation, inadequate maintenance, or
damage due to improper use of cleaning materials or chemicals, or non-
compliance with Aseptico’s storage, installation, operation, maintenance or
environmental requirements; (2) that have undergone any modication or
repair not previously authorized by Aseptico in writing, or service, repair
or modication by or from any facility other than an authorized Aseptico
service center or technician, or that use non-authorized software or spare
or replacement parts; or (3) that fail due to reasonable and normal use or
wear and tear, or materials made, furnished or specied by the buyer or
end user.
Aseptico does not assume under this warranty any risks or liabilities
arising from the clinical use of its products, whether or not such use
involves coincidental utilization of products manufactured by others.
Under no circumstances will Aseptico be liable or responsible for special,
compensatory, incidental, consequential or punitive damages, lost prots,
lost sales, or loss of use or loss of business opportunity by or through the
use of the product. Aseptico’s sole and maximum liability with respect to
the product, other than its obligations set forth above, shall be the total
purchase price paid for the product.
NOTES:

7.

8.
P.O. Box 1548 • Woodinville, WA 98072
8333 216th Street SE • Woodinville, WA 98072
[phone] • [phone]
www.aseptico.com • [email protected]
PRINTED IN THE
U.S.A.
P/N: 420284-01
Rev.
ECO 15498
04/2022