Assa Abloy Norton 6300 Series User manual

1
Quick Start Guide
6300 Series Full Feature Low Energy Operator

2
Regulatory Information
FCC:
Class B Equipment
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the use is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning:
Changes or modifications to this device may void the user’s authority to
operate the equipment.
Industry Canada:
This Class A digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Cet appareillage numérique de la classe A répond à toutes les exigences de
l’interférence canadienne causant des règlements d’équipement.
Declaración de México:
La operación de este equipo está sujeta a las siguientes dos condiciones: (1)
es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo
la que pueda causar su operación no deseada.

3
Turn On Operator WiFi
Toggle
OFF/ON
3x
BEEP

4
Connecting to the
Wireless Network
NDC6300_
1Open WiFi network on
your smart device
YOUR SERIAL NUMBER
YOUR PASSWORD

5
Connecting to the
Wireless Network
2Open Internet Browser
Enter IP: 192.168.1.1

6
Setup
FULL
CLOSE FULL OPEN

7
Reload this page
FULL
CLOSE
Setup
Continue to Settings

8
Settings: Speed/Force & Timing/Location
Speed/Force and Timing/Location
settings must be adjusted to meet
ANSI BHMA A159.19 (American
National Standard for Power
Assist and Low Energy Power
Operated Doors) requirements
for opening and closing based on
door weight and width.
Setup complete!
The following pages are for
additional information.

9
Settings: Options
Settings: Options
and Connections
vary by application.
You can skip these
sections if you
do not need to
customize control
of your operator.
Settings: Save/Restore
Settings: Save/
Restore is used to
transfer settings
to other operators
OR to restore
customized
settings from a
saved le.
Setup and settings
for this operator
are saved as you
go through the
menus.
See Programming
Instructions
80-9363-0015-020
for details.

10
Connections
External inputs must be connected.
(See separate Programming Instructions
80-9363-0015-020 for details.)