Assa Abloy Besam SW300 User manual

User Manual
Swing Door Operator
Besam SW300/SW150
ASSA ABLOY Entrance Systems
Original instructions

CONTENTS
4Congratulations on your new automatic door! ........................................................................
4Electronic equipment reception interference ...........................................................................
4Environmental requirements ..........................................................................................................
4Product liability ...................................................................................................................................
5Warranty ................................................................................................................................................
5Service .....................................................................................................................................................
6Intended use .........................................................................................................................................
6Technical specification ......................................................................................................................
7How the Besam SW300/SW150 works ........................................................................................
8Regular safety checks .........................................................................................................................
11General accessories ............................................................................................................................
11Safety accessories ................................................................................................................................
11Troubleshooting ..................................................................................................................................
12Service/Maintenance .........................................................................................................................
12Other products from ASSA ABLOY Entrance Systems .............................................................
13Declaration of conformity ................................................................................................................
© All rights in and to this material are the sole property of ASSA ABLOY Entrance Systems AB. Copying,
scanning, alterations or modifications are expressly forbidden without the prior written consent of the applicable
company within ASSA ABLOY Entrance Systems AB. Rights reserved for changes without prior notice.
Backtrack information: folder:Workspace Main, version:a160, Date:2014-09-03 time:04:25:15, state: Frozen
1008788-EI-10.0Issue 2014-09-032

Instructions for safe operation
•Failure to observe the information in this manual may
result in personal injury or damage to equipment.
•To reduce the risk of injury to persons - use this oper-
ator with single or double pedestrian swinging or
folding doors only.
•Do not use the equipment if repair or adjustment is
necessary.
•Disconnect supply when cleaning or other mainten-
ance is to be carried out.
•The operator can be used by children age 8 and above,
and persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, if
they have been given supervision or instruction by a
person responsible for their safety concerning safe
operator use and the possible hazards involved.
This does not however prevent those persons to use
the door where the operator is installed.
•Cleaning and user maintenance shall not be made by
children without supervision.
•Do not let children climb on or play with the door or
the fixed/remote controls.
•The doorset can be operated automatically by sensors
or manually by activators. It can also be used manually
as a door closer.
3Issue 2014-09-031008788-EI-10.0

Congratulations on your new automatic door!
ASSA ABLOY Entrance Systems has developed automatic doors for more than 50 years. State-of-the-
art technology and carefully tested materials and components provide you with a superior product.
As with all other technical products, your automatic door requires periodic maintenance and service.
It is essential that you know your automatic door (system) and that you recognize the importance
of maintaining it in compliance with applicable standards for safety.
Your local ASSA ABLOY Entrance Systems-authorized representative is familiar with these standards,
as well as all applicable local codes and ASSA ABLOY Entrance Systems recommendations for power-
operated pedestrian doors. Service and adjustments performed by your ASSA ABLOY Entrance Sys-
tems-authorized representative, will ensure safe and proper operation of your automatic door unit.
Electronic equipment reception interference
The equipment complies with the European EMC directive (US market FCC Part 15), provided installed
according to Installation and Service manual.
The equipment may generate and use radio frequency energy and if not installed and used properly,
it may cause interference to radio, television reception or other radio frequency type systems.
If other equipment does not fully comply with immunity requirements interference may occur.
There is no guarantee that interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Re-orient the receiving antenna.
•Relocate the receiver with respect to the equipment.
•Move the receiver away from the equipment.
•Plug the receiver into a different outlet so that equipment and receiver are on different branch
circuits.
•Check that protective earth (PE) is connected.
If necessary, the user should consult the dealer or an experienced electronics technician for additional
suggestions.
Environmental requirements
ASSA ABLOY Entrance Systems products are equipped with electronics and may also be equipped
with batteries containing materials which are hazardous to the environment. Disconnect power
before removing electronics and battery and make sure it is disposed of properly according to local
regulations (how and where) as was done with the packaging material.
Product liability
According to regulations, the following are the responsibility of the owner or caretaker of the
equipment
•that the equipment operates correctly, so that it gives sufficient protection in regard to safety
and health
•that the equipment is operated and regularly maintained, inspected and serviced by someone
with documented competence in the equipment and in applicable regulations
•that the provided “Service Log Book”and “Site Acceptance Test and Risk Assessment”documents
(PRA-0007) are kept available for maintenance and service records
•that inspection covers the emergency opening function (when applicable)
•that the closing force is appropriate for the door size on fire-approved door systems (when ap-
plicable)
1008788-EI-10.0Issue 2014-09-034

Warranty
ASSA ABLOY Entrance Systems warrants its products to be free from defects in material and work-
manship under intended use and service for a warranty time of 12 months, beginning at time of
delivery. This warranty extends only to the original buyer of the equipment.
ASSA ABLOY Entrance Systems warrants that the software will operate substantially in accordance
with its functional descriptions and that it has been recorded on non-defective media.
The ASSA ABLOY Entrance Systems warranty does not apply to
•That the software will be error-free or operate without interruption
•General wear and tear on the system
•Fuse, disposable batteries and glass damage
•System deviations caused by installer other than ASSA ABLOY Entrance Systems
•System that has been altered or damaged by vandalism or misuse
•System that has been additionally equipped with non-ASSA ABLOY Entrance Systems original
branded parts and/or spare parts
•Unrequired visits due to poor client communication (door working when our technician arrives,
reset, power discontinuation)
•Adjustments (closing and opening speed and also detection field radars) due to customer re-
quests (excludes operational adjustments thought to create a hazard)
•Water damage
•Adverse weather conditions
•Any damage caused, directly or indirectly, by a circumstance beyond the control of the applicable
company within ASSA ABLOY Entrance Systems, such as industrial dispute, fire, natural disaster,
war, extensive military mobilization, insurrection, requisition, seizure, embargo, restrictions in
the use of power and defects or delays in deliveries by sub-contractors caused by any such cir-
cumstances
Please note:
•Non-compliance with manufacturers care and maintenance recommendations may void the
warranty.
•ASSA ABLOY Entrance Systems-authorized resellers shall extend this warranty to end-users only,
but have no authority to extend a greater or different warranty on behalf of ASSA ABLOY Entrance
Systems.
•A service agreement with ASSA ABLOY Entrance Systems will help secure the availability of a
fully operational system and will give priority at call-out, thus minimizing the time that the
equipment is unusable.
Service
Regular inspections by a trained and qualified person, and the frequency of service occasions,
should at minimum be made according to national regulations or industry standard, in the
absence of a national regulation. This is especially important when the installation concerns
a fire-approved door or a door with an emergency-opening function. To extend the life of your
investment and ensure safe and reliable operation of the door, we recommend a minimum
of 2 visits per year or more, depending on usage and operating conditions. Environmental as-
pects shall also be considered.
5Issue 2014-09-031008788-EI-10.0

As your entrances are part of your business flow, there’s every reason to keep
them working well. ASSA ABLOY Entrance Systems offers you a maintenance and
modernization expertise to rely on. Our Maintenance Programs and Modernization
Services for entrance automation is backed by a extensive expertise for all types
of pedestrian- and industrial door and docking systems, independent of brand.
At your disposal is a team of dedicated expert technicians, proven through decades
of maintenance, service and satisfied customers.
Intended use
The Besam SW300/SW150 is an automatic swing door operator developed to make life easier for
everyone who can benefit from automatic doors. The Besam SW300/SW150 is a low-energy as well
as a full power operator using a DC motor and a gear-reduction system to drive an arm system, which
opens the door. It is to be installed indoors where it is suitable for almost all types of external and
internal swing doors. This widely-used operator can be found on applications ranging from handi-
capped-access in private homes to high-traffic retail operations.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
For escape in emergency situations the doorset is opened manually.
For installation and maintenance see Installation and Service manual 1007913.
Save these instructions for future reference.
Technical specification
ASSA ABLOY Entrance Systems ABManufacturer:
Lodjursgatan 10, SE-261 44 Landskrona, SwedenAddress:
Besam SW300/SW150Type:
100-240 V AC +10/-15%, 50/60 HzMains power supply:
Max. 300 WPower consumption:
IP20Class of protection:
Third party approvals from established certification organizations valid
for safety in use, see Declaration of Conformity.
Approvals:
1008788-EI-10.0Issue 2014-09-036

How the Besam SW300/SW150 works
The swing door operator Besam SW300/SW150 uses a DC motor and a gear-reduction system to
drive an arm system which opens the door. Closing power is provided by a motor and a closing spring
(not for Besam SW150). A highly sophisticated electronic control unit uses a motor encoder and a
microprocessor to control the door’s movement.
To activate the operator you can use a manual activator (elbow switch) or an automatic activator
(radar device). It is also possible –where local standards allow –to activate the operator by just
pushing the door, if Push & Go is selected.
After the door has been activated it will open and stay open for a specified Hold Open Time (HOT).
When the HOT has elapsed the door will close.
The Besam SW300/SW150 can be set in three or four different modes, depending on programme
selector type, see table below.
In fully manual use (or in case of a power failure) the Besam SW300 acts as a normal door closer.
The Besam SW150 has no spring and if open at power failure, door will not close.
FunctionPosition
The door can be opened with the inner and outer manual and/or automatic ac-
tivators. The electric strike, if fitted, is open.
AUTO
Normal
position
The door is closed. The door cannot be opened with inner and outer activation
units. The door is locked if an electromechanical locking device has been fitted.
The door can be opened with a key switch (if fitted).
OFF
The door is held permanently open by the motor.OPEN
Passage from inside only. The door is normally locked if an electromechanical
locking device has been fitted. The door can only be opened with the inner activ-
ation unit and with a key switch (if fitted).
EXIT
7Issue 2014-09-031008788-EI-10.0

Regular safety checks
To help you fulfil the national/international requirements and to avoid malfunction and risk for in-
juries, we have provided the following checklist.
Do not use if repair or adjustment is necessary.
Disconnect supply
14
when cleaning or other maintenance is to be carried out.
If problem
occurs
Daily Action
Activate your operator and check visually, fastening and any damage of
•operator
1
•arm system
2
•cables
3
•hinges
5
•door and glass
6
Also inspect your operator and check visually for
•sharp edges on the door leaf and door frame (if any)
7
•condition of door seals
8
•finger protection
9
•and finally that the complete door runs properly and closes slowly in a smooth way
Set the programme selector to OFF and check that the operator and electromechanical lock
(if fitted) work together. Also check that the lock
10
really secures the door.
Activate the manual activation units
11
, if any, and walk towards the door. Check that the door
has opened appropriately while you pass the entrance/exit.
Then proceed with the automatic activation units
12
in the same way.
Check the non-monitored safety sensors
13
if any, by standing in the swing path and activate
the operator. The door must not hit you when opening nor when closing.
If you are unsure of which type of sensor you have, please contact your ASSA ABLOY Entrance
Systems representative.
Set the programme selector in AUTO mode. Push the door manually
in escape direction and make sure that no object or function will
prevent the door from opening. Also make sure the escape route is
free for use.
By law, these tests must be performed regularly by trained personnel.
Escape
doors
Let the door close after an impulse ensuring nothing prevents the
door from closing and locking (if regulations require it).
Fire
doors
Take appropriate measures.=
Contact your ASSA ABLOY Entrance Systems representative. For contact information, see last page.=
1008788-EI-10.0Issue 2014-09-038

FUNCTION AND VISUAL INSPECTION
6
7
10
12
8
3
3
4
3
11
13
9
5
2
3
14
4
1
CLEANING
The best way to remove dust and dirt from the Besam SW300/SW150 is to use water and a soft cloth or a sponge.
A gentle detergent may be used. To maintain the quality of the enamel layer, the surfaces should be cleaned
once/four months period. The cleaning should be documented. To avoid damages to the profiles the
brushes/weather stripping must be vacuum-cleaned weekly.
•Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
•Do not clean with high pressure water. Operator, programme selector and sensor may be damaged and
water may enter the profiles.
•Do not use polishing detergent.
•Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
9Issue 2014-09-031008788-EI-10.0

SIGNAGE
Click!
Click!
800 mm
F
E
D
B
No entry
No entry
G
C
1100 mm
40 mm
TYPEART. NO. YEAR+WEEK
1011247
XXXXXXX XXXXXXX
TEMPERATURE
XXXXXXXXXXX
XXXX
LOAD
XXXXX
XXXXXX XX/XX
Hz PROJECT
SERIAL NO.
XXXXXXXXXX
W
XXXX
AVAC
ASSAABLOY Sicherheitstechnik GmbH Bildstockstraße 20 72458 Albstadt Deutschland FACTORY NO. X
xxxxxxxxxxxxx
xxxxxxxxxxxxx
SÜD
CLASSIFICATION DIN 18650
12 3 4 5 6 7 8
SITAC1002
xxxxxxx
xxxxxxx
1002
A
If problem
occurs
Action
Check that all required signage is applied and intact. Mandatory indicates that the signage is re-
quired by European directives and equivalent national legislation outside the European Union.
Product label: Mandatory
A
Emergency break-out: Mandatory, if approved for escape route.
B
ASSA ABLOY Entrance Systems door sticker: Mandatory, if applicable to highlight the
presence of the glass (applied to all glass sections that are moving).
C
Supervision of child: Mandatory, if applicable (applied to both sides of the door). To be
placed on entrances where the risk analysis shows use by children, elderly and disabled.
D
Operator designed for disabled people:
Recommended, if applicable (applied to both sides of the door)
E
Activation by disabled people: Recommended, if applicable
F
No entry, identifying one-way traffic: Mandatory in GB and US, if applicable
G
Automatic door
H
Keep clear
J
SITAC label: Mandatory in SE
K
Contact your ASSA ABLOY Entrance Systems service representative. For contact information, see last page.=
1008788-EI-10.0Issue 2014-09-0310