Atmel AT18F-DK3 User manual

3685A–CNFG–04/08
Atmel AT18F-DK3 Configurator
Development Kit
....................................................................................................................
User Guide

AT18F-DK3 Configurator Development Kit User Guide i
3685A–CNFG–04/08
Table of Contents
Section 1
Introduction................................................................................................................. 1-1
1.1 Kit Content ......................................................................................................................... 1-1
1.2 Kit Features........................................................................................................................ 1-1
1.2.1 The ATF15xx-DK3 with ATF15xxDK3-SAX20..................................................... 1-1
1.2.2 JTAG ISP Download Cable ................................................................................. 1-2
1.2.3 JTAG Configurator Programming System (JCPS) Software ............................... 1-2
1.3 Supported Devices............................................................................................................. 1-2
1.4 System Requirements........................................................................................................ 1-2
1.5 Ordering Information .......................................................................................................... 1-2
1.6 JCPS References ..............................................................................................................1-3
1.7 Technical Support .............................................................................................................. 1-3
Section 2
Hardware Description................................................................................................. 2-1
2.1 The ATF15xx-DK3 Base Board ......................................................................................... 2-1
2.1.1 7-segment Displays with Selectable Jumpers ..................................................... 2-2
2.1.2 LEDs with Selectable Jumpers ............................................................................ 2-3
2.1.3 Push-button Switches with Selectable Jumpers for I/O Pins ............................... 2-4
2.1.4 Push-button Switches with Selectable Jumpers for GCLR and OE1 Pins........... 2-4
2.1.5 2 MHz Oscillator and Clock Selection Jumper..................................................... 2-5
2.1.6 VCCIO and VCCINT Voltage Selection Jumpers and LEDs ............................... 2-5
2.1.7 ICCIO and ICCINT Jumpers ................................................................................ 2-6
2.1.8 Voltage Regulators .............................................................................................. 2-6
2.1.9 Power Supply Switch and Power LED................................................................. 2-6
2.1.10 Power Supply Jack and Power Supply Header ................................................... 2-6
2.1.11 JTAG ISP Connector and TDO Selection Jumper............................................... 2-6
2.2 Socket Adapter Board...................................................................................................... 2-10
2.3 Atmel CPLD ISP Download Cable ................................................................................... 2-10
Section 3
Schematic Diagrams .................................................................................................. 3-1

AT18F-DK3 Configurator Development Kit User Guide 1-1
3685A–CNFG–04/08
Section 1
Introduction
The Atmel
®
AT18F-DK3 Configurator Development Kit is an In-System Programming (ISP) for the
AT18F Series of FPGA configuration memories (Configurators). This kit provides designers an easy way
to develop, prototype and evaluate new designs using the Atmel AT18F devices. The AT18F Series
JTAG ISP Configurator includes devices in four different densities – AT18F010-30XU (1M), AT18F002-
30XU (2M), AT18F040-30XU (4M), and AT18F080-30XU (7M). Since all of the devices in the AT18F
family are available in only one Green (Halide/Pb-free and RoHS Compliant) 20-lead TSSOP package
type, only one socket adapter board (ATF15xxDK3-SAX20) is needed to program the different AT18F
devices using the ATF15xx-DK3 Base Board and the Atmel JTAG ISP MV Rev 6.0 Cable
(ATDH1151VPC).
1.1 Kit Content
ATF15xx-DK3 Development Base Board
20-lead TSSOP Socket Adapter Board (ATF15xxDK3-SAX20)
An optional ISP Header Converter
One AT18F010-30XU and One ATF18F002-30XU Configurator Samples
A Quick Start Guide
An AT18F-DK3 Flyer
Note: JCPS Tutorial can be found from the Help menu of the software after installation.
1.2 Kit Features
1.2.1 The ATF15xx-DK3 with ATF15xxDK3-SAX20
10-lead JTAG-ISP Port
Regulated Power Supply Circuits for 9V DC Power Source
I/O Voltage Supply (VCCIO)
(1)
Core Voltage Supply (VCCINT)
(1)
20-lead TSSOP Socket Adapter Board (ATF15xxDK3-SAX20)
User I/O Pin Headers for All User I/O Pins of the ATF18 Series Configurators
2 MHz Crystal Oscillator
(2)
Four 7-segment LED Displays
(2)
Eight Individual LEDs
(2)
Eight Push-button Switches
(2)
Global Clear and Output Enable Push-button Switches
(2)
Current Measurement Jumpers

Introduction
1-2 AT18F-DK3 Configurator Development Kit User Guide
3685A–CNFG–04/08
Notes: 1. Both VCCIO and VCCINT must be set to 3.3V while programming the AT18F Series
devices. When changing the VCCIO or VCCINT jumper position, the power of the
ATF15xx-DK3 must be turned OFF.
2. These features are not intended to be used for the AT18F Series devices on this board.
They are intended to be used for the Atmel ATF15xx CPLDs when a different CPLD
Socket Adapter Board is used with the ATF15xx-DK3 Base Board.
1.2.2 JTAG ISP Download Cable
JTAG ISP Download Cable (Atmel JTAG ISP MV Cable V6.0) for PC Parallel Printer (LPT) Port
1.2.3 JTAG Configurator Programming System (JCPS) Software
Atmel JCPS software can be downloaded from Atmel web site at:
– http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4278
1.3 Supported Devices
The Atmel AT18F-DK3 Programming Kit supports the following device types.
AT18F010-30XU
AT18F002-30XU
AT18F040-30XU
AT18F080-30XU
1.4 System Requirements
The minimum hardware and software requirements to program an AT18F Series Configurators on the
AT18F-DK3 Programming Kit through the Atmel JTAG Configurator Programming System (JCPS) Soft-
ware are:
Pentium
®
or Pentium Compatible Microprocessor-based Computer
Windows XP,
®
Windows 98, Windows NT
®
4.0, or Windows
®
2000
64 Mbytes of RAM
200 Mbytes of Free Hard Disk Space
Windows Supported Mouse
Available Parallel Printer (LPT) Port
9V DC Power Supply with 500 mA of Supply Current
SVGA Monitor (800 x 600 Resolution)
1.5 Ordering Information
Part Number Description
ATF18F-DK3 Atmel AT18F Series Configurator Programming Kit

Introduction
AT18F-DK3 Configurator Development Kit User Guide 1-3
3685A–CNFG–04/08
1.6 JCPS References
Help Files – from the JCPS software main window, click on HELP and then select HELP FILE.
Tutorials – from the JCPS software main window, click on HELP, and then select JCPS TUTORIAL.
1.7 Technical Support
For technical support on any Atmel Configurator-related issue, please contact Atmel Configurator Appli-
cations Group at:
On-line Support Request Form:
http://www.atmel.com/dyn/products/support.asp
FAQs:
http://www.atmel.com/dyn/products/faq.asp?Faq=y
Product Web Site:
http://www.atmel.com/products/config/default.asp

AT18F-DK3 Configurator Development Kit User Guide 2-1
3685A–CNFG–04/08
Section 2
Hardware Description
2.1 The ATF15xx-DK3 Base Board
The ATF15xx-DK3 Base Board and the Socket Adapter Board are shown in Figure 2-1. They contain
simple features such as I/O headers that allow designers to easily use it when developing or evaluating
the ATF18 Series Configurator designs.
Figure 2-1. The ATF15xx-DK3 Base Board and the ATF15xxDK3-SAX20 Socket Adapter Board
Voltage
Regulators
GCLR
Switch
GOE
Switch
VCCIO
Selector
VCCINT Selector
VCCIO LED
VCCINT LED
Power LED
Clock Selector
Power Switch
Oscillator
Power Supply Jack
Power Supply Header
JTAG Cascade Jumper
JTAG ISP Header
7-segment
Displays
ATF15xxDK3-SAX20
Socket Adapter Board
Configuration
I/O Pin Headers
Device Socket
Push-button Switches
Push-button Jumpers
LEDsJumpers
LEDs
ICCINT Jumper
ICCIO Jumper

Hardware Description
2-2 AT18F-DK3 Configurator Development Kit User Guide
3685A–CNFG–04/08
2.1.1 7-segment Displays with Selectable Jumpers
The 7-segment Displays with Selectable Jumpers are available on the ATF15xx-DK3 Base Board of the
AT18F-DK3 kit. However, these components were designed for other Atmel adapter boards such us the
ATF15xx Series CPLDs, and they are not intended to be used with ATF15xxDK3-SAX20 socket adapter
for AT18F Series Configurators. Therefore, there is no detailed description about these components in
this user guide, if you need additional information, see the ATF15xx-DK3 Kit user guide.
The circuit schematic of the displays and the jumpers is shown in Figure 2-2.
Figure 2-2. Circuit Diagram of the Display LEDs and Jumpers

Hardware Description
AT18F-DK3 Configurator Development Kit User Guide 2-3
3685A–CNFG–04/08
2.1.2 LEDs with Selectable Jumpers
The LEDs with selectable jumpers are available on the ATF15xx-DK3 Base Board of the AT18F-DK3 kit.
However, these components were designed for other Atmel adapter boards such us the ATF15xx Series
CPLDs and they are not intended to be used with ATF15xxDK3-SAX20 socket adapter for AT18F Series
Configurators. Therefore, there is no detailed description about these components in this user guide, if
you need additional information, see the ATF15xx-DK3 Kit user guide.
Figure 2-3. Circuit Diagram of the LEDs and Jumpers

Hardware Description
2-4 AT18F-DK3 Configurator Development Kit User Guide
3685A–CNFG–04/08
2.1.3 Push-button Switches with Selectable Jumpers for I/O Pins
Eight push-button switches with selectable jumpers are shown on the ATF15xx-DK3 Base Board of the
AT18F-DK3 kit. However, these components were designed for other Atmel adapter boards such us the
ATF15xx Series CPLDs and they are not intended to be used with ATF15xxDK3-SAX20 socket adapter
for AT18F Series Configurators. Therefore, there is no detailed description about these components in
this user guide, if you need additional information, see the ATF15xx-DK3 Kit user guide.
Figure 2-4. Circuit Diagram of the Push-button Switches and Jumpers for the I/O Pins
2.1.4 Push-button Switches with Selectable Jumpers for GCLR and OE1 Pins
Two push-button switches for the Global Clear (GCLR) and Output Enable (OE1) with selectable jump-
ers are shown on the ATF15xx-DK3 Base Board of the AT18F-DK3 kit. However, these components
were designed for other Atmel adapter boards such us the ATF15xx Series CPLDs and they are not
intended to be use with ATF15xxDK3-SAX20 socket adapter for AT18F Series Configurators. Therefore,
there is no detailed description about these components in this user guide, if you need additional infor-
mation, see the ATF15xx-DK3 Kit user guide.
Figure 2-5. Circuit Diagram of Push-button Switches and Selectable Jumpers for GCLR and OE1

Hardware Description
AT18F-DK3 Configurator Development Kit User Guide 2-5
3685A–CNFG–04/08
2.1.5 2 MHz Oscillator and Clock Selection Jumper
The 2 MHz Oscillator and Clock Selection Jumper, JP-GCLK, are shown on the ATF15xx-DK3 Base
Board of the AT18F-DK3 Kit. However, these components are designed for other adapter boards to be
used with Atmel ATF15xx Series CPLDs, and they are not intended to use with ATF15xxDK3-SAX20
socket adapter for AT18F Series Configurators. Therefore, there is no detailed description about these
components in this document, but user can always reference ATF15xx-DK3 user guide for more
information.
Figure 2-6. Circuit Diagram of Oscillator and Clock Selection Jumper
2.1.6 VCCIO and VCCINT Voltage Selection Jumpers and LEDs
The VCCIO and VCCINT Voltage Selection Jumpers, labeled VCCIO Selector and VCCINT Selector,
respectively on ATF15xx-DK3 Base Board of the AT18F-DK3 kit are used to select voltage supply to the
device and to the JTAG connector. VCCIO voltage is used to set the I/O interface voltage (VCCO) and
JTAG programming voltage (VCCJ) of the AT18F Series Configurator. Also, VCCINT voltage jumper is
used to set the Core supply voltage of the AT18F Series device. When programming the AT18F Series
Configurator with the ATF15xxDK3-SAX20 adapter board, it is required to set both the VCCIO voltage
selector jumper and VCCINT voltage selection jumper to 3.3V.
Note: The power of the ATF15xx-DK3 Base Board MUST BE turned OFF when changing the
position of the VCCIO or VCCINT voltage selection jumper (VCCIO Selector or VCCINT
Selector).