Atos Freevent XtraCare Mini User manual

Effective filtration along with good
humidification for daily protection.
XtraCare™
NEW!

A tracheostomy means that
humidification and filtration functions
are lost. Combining an HME with a filter,
provides more than humidification. It also
provides very effective filtration, for daily
protection.
XtraCare™

Humidification and filtration are lost after a
tracheostomy
When breathing through the mouth and nose the
upper airways humidify and filter the inhaled air.
In this way, you can be sure the air is at the right
body temperature and contains enough moisture
when it reaches the lungs for them to function
properly.
A tracheostomy bypasses the upper airways,
which means that the important humidification
and filtration functions are mostly lost. The
airways react by producing more and thicker
mucus, that is more difficult to cough or suction
out. Wearing an HME can help compensate for
these lost functions.
Why it is important to use an HME
Heat and Moisture Exchangers (HMEs) have been
developed to compensate for the lost functions
of your nose and help re-balance the “climate” in
the lungs.
An HME improves lung health by heating and
moisturizing the inhaled air. Continuous use of a
Heat and Moisture Exchanger (HME) is known to
reduce mucus production in the majority of neck
breathers, and helps to improve quality of life.
A traditional HME humidifies the inhaled air, but
does not filter effectively. Therefore it does not
adequately prevent viruses, bacteria and other
fine airborne particles from entering the airways.
Respiratory conditions
Tracheostomized children have a high risk
of respiratory infections. This is due to the
naturally protective oral and nasal passages
being bypassed, allowing microorganisms into
the lower airways more easily. Also, the use of a
tracheostomy tube can irritate the mucosa of the
trachea, further increasing infection risk.
Freevent XtraCare Mini is an HME with a high
filtering capacity:
• Effective filtration of bacteria >99%*
• Effective filtration of viruses >98%*
• Good humidification
• Compact design, tailored for pediatric
patients.
• Available in three different colors
• If supplemental oxygen is needed, Freevent
XtraCare Mini can be combined with
Freevent O2Adaptor Mini.
Freevent XtraCare Mini combines an HME with a highly effective filtration, which provides your child
with protection against viruses, bacteria, pollen and other airborne particles.
*Please note: Since pathogens can enter and leave the
human body in other ways, (such as the mouth, nose,
and eyes), Freevent XtraCare Mini can never guarantee
complete protection. Please read the Instructions for Use
for guidance.

Filtration efficiency*
Filtration
of bacteria
(average)
Filtration
of virus
(average)
Freevent XtraCare Mini >99% >98%
T-shaped HME with paper 14 % 33 %
T-shaped HME with foam 57 % 51 %
Chimney shaped mini HME 40 % 55%
Excellent filtration of viruses and bacteria
In addition to the HME, Freevent XtraCare Mini
has an electrostatic filter that can effectively
reduce the inhalation of airborne particles, such
as viruses, bacteria, dust and pollen via the
tracheostoma. The viruses, bacteria and airborne
particles collide with the filter fibers. In addition,
the electrostatic capacity makes it possible to also
attract and capture the particles.
It is the combination of these filtering mechanisms
that enables the excellent Freevent XtraCare Mini
filtering.
Provides humidification and improves lung health
Freevent XtraCare Mini warms and humidifies
the air your child breathes in to help reduce the
amount and thickness of mucus and improves lung
health.
*Please note: Since pathogens can enter and leave the
human body in other ways, (such as the mouth, nose,
and eyes), Freevent XtraCare Mini can never guarantee
complete protection. Please read the Instructions for Use
for guidance.
Daily protection
Freevent XtraCare Mini can be used both day
and night and helps to protect your child through
effective filtration of inspired air as well as their
direct surroundings by effective filtration of the
expired air.
XtraCare™

How to use Freevent XtraCare Mini
Precautions
• Do not wash and re-use the HME. Washing
the HME impairs the filtering and HME
functions.
• Do not use a soiled or contaminated device as
this may cause an infection.
• Do not administer a medicated nebulizer
treatment over the device since the
medication can be deposited in the device.
• Do not use humidifiers or heated humidified
oxygen over the device since the HME will
become too wet.
• Do not use the device beyond 24 hours after
initial use. This can increase the risk for
infection due to bacterial colonization.
• Do not use a damaged or disassembled
Freevent XtraCare Mini as this may cause
aspiration of small parts
You attach the HME to the tube using a
twisting motion.
The HME needs to be changed at least
every 24 hours or more often if needed,
e.g. breathing resistance increases due to
mucus.
To remove the HME, hold the tracheostomy
tube in place and gently remove the HME
using a twisting motion.
Dispose of the used HME.
1
2
3

How to use Freevent O2Adaptor Mini
Start by connecting Freevent O2Adaptor
Mini to Freevent XtraCare Mini, an audible
click will confirm it’s securely in place.
Then attach the oxygen tubing, 1/8 inch
(3.2 mm) diameter, to the adaptor and
make sure the oxygen tube goes beyond
the conical edge of the connector.
When this is completed, you can attach
the HME to the tube and apply oxygen as
prescribed by the physician.
The oxygen tubing can be detached from
the adaptor after oxygen supply and
attached if oxygen supply is resumed.
Freevent O2Adaptor Mini should be
replaced at least every 24 hours, or when
it becomes dirty, contaminated or shows
any signs of damage. If needed, it can be
removed and used again within 24 hours
for the same patient.
1
2
3
4

MC2574-TcEN 202102
© Atos Medical AB, 2021
We develop products in close cooperation with leading institutions, doctors, physicians, nurses, speech
language pathologists and patients from all over the world, to improve patients’ quality of life through
smart and innovative solutions. Please discuss with your treating physician if Freevent XtraCare Mini is
right for you. For more information about the Freevent assortment and Instructions for Use, please visit
www.atosmedical.com.
Contact us for more information
Head office:
Atos Medical AB,
Hyllie Boulevard 17,
SE-215 32 Malmo, Sweden
Tel: [phone],
Email: [e-mail]
Manufacturer:
Atos Medical AB,
Kraftgatan 8,
SE-242 35 Horby, Sweden
Order information REF
Freevent XtraCare Mini White, 30 pcs 8004
Freevent XtraCare Mini Blue, 30 pcs 8005
Freevent XtraCare Mini Pink, 30 pcs 8006
Freevent XtraCare Mini White, 5 pcs 8008
Freevent O2 Adaptor Mini, 10 pcs 8007