Auriol z31163 User manual

RADIO-CONTROLLED CLOCK
Operation and Safety Notes
FUNKUHR
Bedienungs- und Sicherheitshinweise
RADIO-SAT
Upute za posluživanje i za Vašu sigurnost
ΡΟΛΟΪ ΡΑΔΙΟΚΥΜΑΤΩΝ
Υποδείξεις χειρισμού και ασφαλείας
CEAS
Instrucţiuni de utilizare şi de siguranţă
РАДИОЧАСОВНИК
Инструкции за обслужване и безопасност
7
Z31163

GB/CY Operation and Safety Notes Page 6
HR Upute za posluživanje i za Vašu sigurnost Stranica 20
RO Instrucţiuni de utilizare şi de siguranţă Pagina 34
BG Инструкции за обслужване и безопасност Страница 49
GR/CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 64
DE/AT / CH Bedienungs- und Sicherheitshinweise Seite 79

3
A
11
1
10 9 8 7
2
4
3
5
6

4
B
12 13 14

5
C
20 19 18 17 16 15

6 GB/CY
Proper use ..............................................................................................Page 7
Description of parts and features......................................Page 7
Technical data......................................................................................Page 8
Scope of delivery..............................................................................Page 8
Safety..........................................................................................................Page 8
General Safety Information ........................................................................Page 9
Safety advice concerning batteries............................................................Page 9
Before initial use...............................................................................Page 10
Preparations for use......................................................................Page 10
Inserting the batteries ..................................................................................Page 11
DCF radio signal reception.........................................................................Page 11
Adjusting the basic settings.........................................................................Page 12
Setting the wake-up time.............................................................................Page 14
Switching off the alarm signal.....................................................................Page 14
Setting up barometric pressure and weather trend...................................Page 15
Setting the temperature unit........................................................................Page 16
Setting the barometric pressure unit...........................................................Page 16
Switching on the illumination ......................................................................Page 17
Troubleshooting.................................................................................Page 17
Cleaning and care............................................................................Page 17
Disposal.....................................................................................................Page 18
Information
Declaration of Conformity...........................................................................Page 19

7GB/CY
Radio-controlled clock
Proper use
The radio clock has a date display and an alarm clock with two wake-up
times that can be set. The radio clock displays the temperature at the location
of the device as well as the barometric pressure and a trend display of
barometric pressure development. The weather trend is an additional display
value and is calculated by evaluating the barometric pressure fluctuations.
Description of parts and features
1Room temperature
2Weather trend
3Current barometric pressure
4Barometric pressure trend
5Barometric pressure unit
6Day of the week
7Radio icon
8Alarm 2
9Alarm 1
10 Time
11 Date
12 Suspension eye
13 Battery compartment
14 Battery compartment cover
15 Stand

8 GB/CY
16 ▼ ALARM ON/OFF button
17 ▲ °C/°F button
18 SNOOZE/LIGHT button
19 WEATHER/UNIT button
20 MODE/SET button
Technical data
Batteries: 2x AA, 1.5V (included in delivery)
Radio clock signal: DCF
Temperature measurement range: 0°C to +50°C
Temperature resolution: 0.1°C
Barometric pressure
measurement range: 850 hPa to 1050 hPa
Humidity acquisition cycle: 1hr.
Scope of delivery
1 Radio alarm clock with weather station
1 Base
2 Batteries AA, 1.5V
Safety
PLEASE RETAIN ALL SAFETY INFORMATION AND INSTRUCTIONS
FOR FUTURE REFERENCE!

9GB/CY
General Safety Information
Children or persons lacking knowledge or experience in handling the
device or have limited physical, sensory or mental abilities, must not use
the device without supervision or instruction by a person responsible
for their safety. Children must be supervised at all times to prevent
them from playing with the device.
CAUTION! When choosing where to position the weather station,
make sure that it is not exposed to direct sunlight. Set up the device in
a dry, dust-free interior room. Otherwise it might be damaged.
This device has delicate electronic components. Do not place the
appliance near to sources of interference, such as mobile telephones,
wireless transmitters, CB-radios, remote controls or microwaves, etc.
These may hinder reception of the radio signal.
Safety advice concerning batteries
CAUTION! EXPLOSION HAZARD! The batteries must never be
recharged!
When inserting the batteries, ensure the correct polarity! This is shown
in the battery compartments.
If necessary, clean the battery and device contacts before inserting the
battery.
Remove spent batteries immediately from the device. There is an
increased danger of leaks!
Batteries must not be disposed of in the normal domestic waste! Every
consumer is legally obliged to dispose of batteries in the proper manner!

10 GB/CY
Keep batteries away from children. Do not throw batteries into a fire.
Never short-circuit them or take them apart.
Always replace all batteries at the same time and only use batteries of
the same type.
If the batteries in your device have leaked, remove them immediately
to prevent damage to the device!
Avoid contact with the skin, eyes and mucous membranes. Any parts
of the body coming into contact with battery acid should be rinsed off
with copious amounts of water and/or a doctor contacted if necessary!
Before initial use
For wall mounting:
Note: Mounting on solid masonry walls requires a screw and a screw
anchor (ø 6mm). Other wall substrates may require other mounting materials.
Seek specialist advice if necessary.
Use the suspension eye 12 to hang the device on a screw.
Mounting with base:
Press the pins on the base 15 into the corresponding openings on the
device (see Fig. C).
Preparations for use
After you have mounted the device, remove the protective film from the
display.