Autel TR201 User manual

Quick Guide:
INSTALLATION GUIDE:
! IMPORTANT: Before operating or maintaining this unit, please read
these instructions carefully and pay extra attention to the safety
warnings and precautions. Use this unit correctly and with care. Failure
to do so may cause damage and/or personal injury and will void the
warranty.
Warranty:
AUTEL guarantees that the TR201 is free from material and
manufacturing defects for a period of 24 months or for 24,000 miles,
whichever comes first. AUTEL will at its discretion replace any
merchandise during the warranty period. The warranty shall be void if
any of the following occurs:
1. . Improper installation of the product;
2. Improper use;
3. Product damage due to collision, man-made damage or natural
disasters;
4. Exceed the product-specific use restrictions.
CAUTION:
1. The Autel TPMS ECU needs to be used with the Autel standard cable.
Otherwise, it may cause a short circuit on the vehicle.
2. When using the original TPMS ECU, avoid using the Autel standard

cable. Otherwise, it may cause a short circuit on the vehicle.
3. Before installing the TPMS ECU, please confirm that the installation
model is correct. Otherwise, it may cause a short circuit on the vehicle.
Instruction Guide:
Procedures:
1. Program the TR201 TPMS ECU using the TPMS programming tool
2. Code the vehicle and retrofit TPMS function
3. Install the TPMS ECU and sensor
4. Relearn the TPMS system according to the relearning steps
Operations Guide:
1. Take MX808TS and VCI Mini as an example, connect TR201 and VCI
Mini to the corresponding interface of ECU_DPL_01 programming cable,
and supply 12V to the programming cable, then connect MX808TS and
VCI Mini via Bluetooth. The specific connection is as follows:
2. Tap the TPMS icon in the MX808TS main menu
3. Select the Model ėYear in turn
4. Tap the Retrofit button in the navigation bar at the top of the screen
to display the installation interface. Tap the Autel ECU Relearn button at
the bottom of the screen to program the TR201 TPMS ECU.
5. In the installation interface, detailed operation guide is displayed,
including the relearn function, TR201 installation position and so forth.

Before starting the operation, please read the operations guide carefully
in order to realize the TPMS function easily.
Packing List Quantity
TR201 TPMS ECU 1
Standard Cable 1
Quick Guide 1
Item Description
Weight(NW) 53g
Dimensions 95*90*24 mm
Rated Voltage 12V
Rated Current 50mA
Operating Temp. -40---85ć
Receive Frequency 433.92Mhz & 315Mhz

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.