AVer M11-8MV User manual










M11-8MV
Instruction Manual 安裝指南
取扱説明書 Bedienungsanleitung
Manuel d’instructions Manual de instrucciones
Manuale di istruzioni
V2


English……..……………………………………………..…............1
繁體中文....…………………………………………………...….......28
日本語…..……………………………..……………………....…......55
Deutsch.......................................................................................83
Français………………………………………………..……...........110
Español...……………………………………………..….............138
Italiano..........…………………………….….…………….....….....166


English-1
Package Contents
The items below are included with this product. If any item is missing, contact the
dealer from whom you purchased this product.
M11-8MV unit USB Cable QR Code Card
Warranty card*
* Only for Europe, Japan, and Taiwan
Optional Accessories
Carrying Bag Anti-glare Sheet

English-2
Overview
Camera Head
LED Lighting
Arm
Built-in MIC
Functional
Buttons
Status Indicator
Stand Base
Micro SD Card Slot
USB Port
Mini USB/Power Port
VGA Out Port
HDMI Out Port

Function Buttons
Control Panel
Button Function

Lamp on/off
Press and hold 3 seconds to call out OSD menu.
Zoom in
Zoom out

Rotate 0/180°
Press and hold 3 seconds to freeze the screen. To un-freeze,
press and hold 3 seconds again.

Auto focus
Press and hold 3 seconds to start recording.
To stop recording, press and hold 3 seconds again.
Power on/off


English-3
OSD Mode
Button Function

Back to last menu level page
Exit from OSD menu
Up (selection item)
Down (selection item)
Selection enter

English-4
Compound Key
Press keys to operate the compound key function.
Button Function
+Back to factory default settings
+  Capture image
[Note] For Recording and Capture, please change to “Power Supply Only”
mode.
LED Indicator
Power Solid green: Power on
Solid red: Standby
Flashing red: The camera is in start-up process.

English-5
Device Connection
Power Connection to Wall Outlet
Plug in power and turn on M11-8MV.
Wall Outlet
USB Power adapter
(Not included)
USB cable

[Note]
Use the USB cable included in the package to connect to mini USB/
Power port of M11-8MV with USB power adapter (not included) to
wall outlet.
User needs to purchase a 5V/1A USB power adapter (not included)
to connect the USB cable to wall outlet.
When the camera is start-up, the power indicator is in flashing red.
1

English-6
Power Connection to PC/Laptop














Connect to USB port of PC/laptop for power supply.
USB cable

[Note]
Use the USB cable included in the package to connect to mini
USB/ Power port of M11-8MV with laptop/PC.
When the camera is start-up, the power indicator is in flashing
red.
USB power requirement of M11-8MV is USB 5V/1A.
For Storage, Format, Capture, Recording and Playback functions,
please change to “Power Supply Only” mode

1

English-7
HDMI Connection



VGA Connection


1 Connect M11-8MV to HDMI display with HDMI output port.
HDMI cable
(Not included)
Wall Outlet
USB Power adapter
(Not included)
USB cable
1 Connect M11-8MV to VGA display with VGA output port.
LCD monitor LCD/DLP projector
Wall Outlet
USB Power adapter
(Not included)
USB cable
VGA cable
(Not included)

English-8
USB Connection












Insert a Micro SD Card

Connect USB flash drive to USB port to save the capture and
recording file.

[Note] The supported USB flash drive maximum is 32G (FAT32).
1 Insert the card to micro SD card slot.

[Note]
Micro SD card can store capture images and recording files.
The supported micro SD card capacity maximum is 32G (FAT32).
1

English-9
Operate the Camera with AVerTouch



















1 Connect the camera to PC/laptop and Install the AVerTouch
application.
AVerTouch
USB cable
AVerTouch

[Note]
Download AVerTouch application at:
https://presentation.aver.com/download-center/
Please set the camera to USB mode. Go to OSD menu >
SETTING > USB to PC > USB Camera.

2 Open AVerTouch application, click to connect the camera.


English-10
Presentation Mode (Live)
[Note] Before using annotation feature or PIP/PBP function of presentation
mode, set the camera to Power Supply Only mode first. Go to OSD menu >
SETTING > USB to PC > Power Supply Only.
Annotation
In single image live (preview) mode, user can use the annotation feature to
overlay straight line or freeform line on the captured image with the USB mouse
connected to the USB port of M11-8MV.
1. Connect the mouse to USB port of M11-8MV.
2. Go to OSD menu > PRESENTATION > Annotation.

English-11
3. In live screen, right-click mouse to call out annotation bar.
Annotation bar description

Button Function
Color Palette
Select the line color.
Line Thickness
Select the thickness of the line.
Line Select a straight line, freehand or sharp to draw.
Capture Capture the image with the annotation and save it
as a new file.
Eraser Select to erase any part of the annotation that it
comes in contact with or delete all annotation.
Delete Clear all annotation on the screen.
Back Exit annotation bar.

English-12
PIP Function
Select the thumbnail playback screen location and show the thumbnail playback
screen at the corner of the screen to recall the captured image from the SD card.
1. In camera mode, press and hold button for 3 seconds to call out OSD
menu.
2. Use and buttons to move to PRESENTATION > PIP. Press
to confirm the selection.
3. Select the display location of thumbnail playback screen – Upper Left,
Upper Right,Lower Left, or Lower Right. Press to confirm the
selection.

4. The PIP display screen shows as following.


English-13
PBP Function
Select the captured image location and show the capture image on the screen to
recall the captured image from the SD card.
1. In camera mode, press and hold button for 3 seconds to call out OSD
menu.
2. Use and buttons to move to PRESENTATION > PBP. Press
to confirm the selection.
3. Select the display location of thumbnail playback screen – Upper Left,
Upper Right,Lower Left, or Lower Right. Press to confirm the
selection.

4. Use and buttons to select the captured image from the list

English-14
5. The PBP display screen shows as following (PBP is down location). Use
and buttons to move the captured image up and down to view.















Live view
Captured image

English-15
Playback Mode
View the capture images and recording files.
Switch to Playback Mode
1. In camera mode, press and hold button for 3 seconds to call out
OSD menu.
2. Use and buttons to move to SETTING > USB to PC >
Power Supply Only.

3. Use , and buttons to
move to PLAYBACK selection.
4. Then, press to confirm the
selection and switch to playback
mode.
5. In Playback mode, use + 
and + buttons to
select image or video to view
manually. To play a video, press
button to start playback.
To pause playback, press
button again. Press to stop
playback.


English-16
OSD Menu Buttons
Button Function
Back to last menu level page
Up (selection item)
Down (selection item)
Selection enter
Playback Menu Buttons
Button Function
+ 
+ 
Image / video selection
+:Fast forward while playback video
+: Fast rewind while playback video
Zoom in image
Zoom out image

Play video
Press and hold to pause while video is playback
Stop play video
Slide Show
To automatically play all capture
images and recorded videos; but
videos only display files and will not
play video contents.


English-17
Interval
Set the interval before displaying the
next picture. The length can be set up
to 120 sec.

Storage
Select the source of the images and
videos.

Delete File
Permanently delete the image or video
in selected. A Warning Message will
appear. Select Yes to continue and No
to cancel the deletion.

Delete All
Permanently delete all the data in
selected memory source. A Warning
Message will appear. Select Yes to
continue and No to cancel the deletion.



English-18
Annotation
In single image playback mode, user can use the annotation feature to overlay
straight line or freeform line on the captured image with the USB mouse
connected to the USB port of M11-8MV.
[Note] Annotation function is not supported with video file.
1. Connect the mouse to USB port of M11-8MV.
2. Press to call out OSD menu.
3. Select “Playback”.
4. Select the image and playback tool bar is displayed. Or right-click mouse to
call out playback tool bar.