AVLink WVGA-LJ User manual

VGA EXTENDER
WVGA-LJ
(Local)
WVGA-RJ
(Remote)
USER MANUAL V1.0

Package Contents for WVGA-EJ
WVGA-LJ Local Unit
WVGA-RJ Remote Unit
1 user manual
2 power adapter DC 12V/600mA
1 VGA 1.2M cable (HD-15 Male to Male)
2 captive screw connectors
4 M4*10mm screws
4 P6*14mm screws
Package Contents for WVGA-RJ
WVGA-RJ Remote Unit
1 user manual
1 power adapter DC 12V/600mA
1 captive screw connectors
2 M4*10mm screws
2 P6*14mm screws
Any thing missed, please contact with your vendor.

Features
Through the VGAExtender, you can use one PC to display identical image and extension of
VGA signal up to 300 meter on monitors.
Equalization length is adjustable.
VGA signal gain is adjustable.
Specifications
Function WVGA-LJ WVGA-RJ
VGA In/Out Connector HD-15 Female x 1
Cable Connector RJ-45 Female
Max. Resolution 1280x1024 60Hz
Cable Distance 300 m (Max.)
Power Adapter (Min.) DC 12V 600mA
Housing Metal
Weight 165 g 170 g
Dimensions (LxWxH) 78.2x41.2x52.8 mm
LOCAL FRONT VIEW
1. VGA Input (HD-15 Female Connector)
2. Power LED
3. Control H/V signal inverting switch
The default setting of SW1 is “OFF”. If SW1 is set to “ON”, the H signal is inverting output.
The default setting of SW1 is “OFF”. If SW2 is set to “ON”, the V signal is inverting output.
If the local end changes the logic with the H/V signal or the logic of the H/V signal, please
use then this function.

LOCAL REAR VIEW
1. Power Connector
2. RJ-45 Connector
REMOTE FRONT VIEW
1. VGA Output (HD-15 Female Connector)
2. EQ – Equalization length adjust (Adjust it and weak characters be sharp)
3. GAIN – Adjust brightness
4. Power LED
5. Control H/V signal inverting switch
The default setting of SW1 is “OFF”. If SW1 is set to “ON”, the H signal is inverting output.
The default setting of SW1 is “OFF”. If SW2 is set to “ON”, the V signal is inverting output.
If the local end changes the logic with the H/V signal or the logic of the H/V signal, please
use then this function.

REMOTE REAR VIEW
1. Power Connector
2. RJ-45 Connector
Installation
1. Turn off the PC.
2. Connect WVGA-Extender Local Unit HD-15 female input connector with HD-15 male to male
cable from PC.
3. Connect WVGA-Extender Local Unit HD-15 female output connector with HD-15 male to male
cable from monitor.
4. Connect WVGA-Extender Local and Remote Unit with CAT.5 cable.
5. Connect WVGA-Extender Remote Unit HD-15 female connector with HD-15 male to male
cable from monitor.
6. Connect the power cord on each side.
7. Turn on the monitor and PC.

Wiring Information & Coding
Conductor Identification RJ45 Pin Assignment Color Code for Conductor
5 White-Blue
Pair 1 4 Blue
1 White-Orange
Pair 2 2 Orange
3 White-Green
Pair 3 6 Green
7 White-Brown
Pair 4 8 Brown
Adaptor Output Polarity
PIN # Output Level Color Code for
Conductor
1 +12V Black-White
2 RTN(-) Black
Red Sleeve
Black Sleeve
PIN1
PIN2
+
-

Additional Options
Select any additional options you may require.
It provides perfect skew delay correction, we suggest when distances over 150M it is needed.
(Item No: SK-101)
Distances and Resolutions for CAT.5/5E and CAT.6
cables
50M 2048x1536
100M 1280x1024
180M 1024x768
200M 800x600
CAT.5/5E
300M 640x480
30M 1920x1440
50M 1280x1024
CAT.6
100M 800x600
PS. We suggest to use CAT.5 cable because the performance is better than others.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names referred to this manual are the
trademarks or registered trademarks belonging to their respective companies.