AXE MFRTS Series User manual

Rev.1.0
1
AXE MICROPROCESS PULSE INPUT RATE & TOTALIZER METER (SELF-POWER) MFRTS series
■FEATURES
◎Accept Non-voltage input (Contact/NPN) or DC voltage
input(NPN/PNP)or magnetic pick up 0.5~15V signal ◎Scale can be modified(0.0001 to 9999.9999)
◎Accuracy 0.05% F.S. ◎Totalizer over automatic reset or external reset
◎Rate display range 0~99999 can be modified ◎Display average can be modified(1~99)
◎Totalizer display range 0~99999999 ◎Man-machine interface,easy to operate
◎Input range 0.01Hz~1KHz ◎EEPROM Saving ,data safekeeping about 10 years
◎Rate and Totalizer decimal point can be modified ◎Modified inside parameter ,must have pass code
◎Totalizer timebase can be modified(1/60/3600sec) ◎Battery life about 9 year minimum with continuous
■Name of Parts
■Signal input terminal wiring and internal jumper diagram
◎Contact input (No-voltage input) ◎NPN input (No-voltage input)
◎PNP/NPN input(DC voltage input 1V~15V) ◎Magnetic pick-up 0.5~15V input
■External power jumper diagram
◎ Internal battery power ”OFF”
◎Internal battery power”ON”
ENT 

D-S

R
T
Display
Totalizer Display indicate
Rate Display indicate
Display manual form selection button
(Rate/ Totalizer is changed in turn)
Set-value up
Cursor shift
Parameter ENTER(Function call out)
INPUT(+)
INPUT(-)
RESET(+)
RESET(-)
Inside jumper
1 2
ON ON
INPUT(+)
INPUT(-)
RESET(+)
RESET(-)
Inside jumper
1 2
ON OFF
Sensor
Inside jumper
1 2
OFF OFF
INPUT(+)
INPUT(-)
RESET(+)
RESET(-)
PIN
JUMP
“
OFF
”
POWER
PIN
JUMP
“
O
N
”
POWER
V+
INPUT(+)
INPUT(-
)
RESET(+
)
RESET(-)
Inside jumper
1 2
OFF OFF
V+

Rev.1.0
2
Key Introduce Operation Manual
Key Function1.In normal display,The key function is call out setting group
2.In parameter setting page,The key function is data Enter , and goto next page
Key Function1
.Into parameter setting page,the parameter mark&data is alternate display,If need modify data can
press key into setting procedure,The display is lock parameter data,this time must let off key
about 0.2 sec,press again,the cursor(twinkle express)is cycle moving left. (Key Response about
0.2 sec)
Key Function1.Into parameter setting page,the parameter mark&data is alternate display,If n
eed modify data can
press key into setting procedure,The display is lock parameter data,this time must let off key
about 0.2 sec,press again,the parameter data will increment. (Key Response about 0.2 sec)
D-S Key Function 1.In normal display, the main function is to switch between the Rate and the Totalizer display
(press the D-S button to change the page once)
No Key in anything 1.In setting page no key in anything about 2 minutes,return normal display,but if in Setting page
the modify data will be lost
Step Parameter Mark Description Parameter Mark Operation Manual
1
Normal display  Press key intoP.CODE setting page

2
P.CODE
(Pass code input page)
Default=0 
1.Key in 5 digit pass code with orkey
2.Press key,the pass code is right into DPR page, otherwise
return normal display

3
DPR(Decimal Point Rate
setting page)Default=0 
1.Decide rate decimal point position withkey(0 to 4)
2.Presskey enter data and into DSPH setting page

4
DSPH(Display High Scale
setting page)Default=10000 
1.Decide rate display high scale with&key(0 to 99999)
2.Presskey enter data and into INHI setting page

5
INHI(Input Max. Hz)
Default=999.99 
1.Decide input max. Hz with&key(0.01 to 999.99Hz)
2.Presskey enter data and into AVG setting page

6
AVG (Dispaly Average time
setting page)Default=1 
1.Decide display average times with&key(1 to 99)
2.Presskey enter data and into TBASE setting page

7
TBASE(Time Base)
Default=1 
1.Decide time base with&key(1 to 99)
2.Presskey enter data and into DPT setting page

8
DPT (Decimal Point Totalizer
setting page)Default=0 
1.Decide totalizer decimal point position withkey(0 to 4)
2.Presskey enter data and into C.TIME setting page

9
C.TIME (Count Time)
Default=1 
1.Decide C.TIME withkey(1/60/3600 sec)
2.Presskey enter data and into SCALE setting page

10
SCALE (Scale to totalize
setting page)Default=1.0000

1.Decide Totalize scale with&key(0.0001 to 9999.9999)
2.Presskey enter data and into CODE setting page

11
CODE(Pass Code setting
page)Default=0 
1.Decide pass code with&key(0 to 99999)
2.Presskey enter data and into LOCK setting page

12
LOCK(Panel Lock setting
page)Default=NO 
1.Decide panel lock withkey(NO or YES)
2.Presskey enter data and return Normal display page
Appendix
Error Mark Description Error Mark Analyze & Description

1
Input over error detect

Input frequency over range(1KHz)

2
Display over error detect

Display over range(99999)


3
EEPROM error detect

1.External interference when EEPROM read/write
2.EEPROM write over 100000 times(guarantee 10 years)
Please power reset,if still display E-00,doing following step:
1.E-00 & No alternate display for inquire reset EEPROM
2.Decide Yes withkey,presskey return normal display
3.EEPROM was reset,Please follow step 1~12 set again