Axis D4100-E User manual

AXISD4100-ENetworkStrobeSiren
UserManual

AXISD4100-ENetworkStrobeSiren
TableofContents
Installation................................................3
Getstarted................................................4
Findthedeviceonthenetwork....................................4
Openthedevice'swebpage.......................................4
Webpageoverview..............................................5
Congureyourdevice........................................6
Turnoffmaintenancemodeafterinstallingthesiren...................6
Turnonmaintenancemode.......................................6
ongureaprole..............................................6
Importorexportaprole.........................................6
Setuprulesforevents...........................................7
Thedeviceinterface.........................................12
Status........................................................12
Overview......................................................12
Proles........................................................13
Apps..........................................................14
System........................................................14
Maintenance...................................................27
Specications..............................................29
Productoverview................................................29
LEDindicators..................................................29
Buttons.......................................................29
onnectors....................................................29
Lightpatternnames.............................................30
Maximumsoundpressurelevels....................................31
Cleaningrecommendations...................................33
Troubleshooting............................................34
Resettofactorydefaultsettings...................................34
Firmwareoptions...............................................34
heckthecurrentrmwareversion.................................34
Upgradethermware............................................34
Technicalissues,clues,andsolutions................................35
Performanceconsiderations.......................................36
ontactsupport.................................................36
2

AXISD4100-ENetworkStrobeSiren
Installation
Installation
Towatchthisvideo,gotothewebversionofthisdocument.
www.axis.com/products/online-manual/62021#t10168836
3

AXISD4100-ENetworkStrobeSiren
Getstarted
Getstarted
WARNING
Flashingorickeringlightscantriggerseizuresinpersonswithphotosensitiveepilepsy.
Findthedeviceonthenetwork
TondAxisdevicesonthenetworkandassignthemIPaddressesinWindows®,useAXISIPUtilityorAXISDeviceManager.Both
applicationsarefreeandcanbedownloadedfromaxis.com/support.
FormoreinformationabouthowtondandassignIPaddresses,gotoHowtoassignanIPaddressandaccessyourdeice.
Browsersupport
Youcanusethedevicewiththefollowingbrowsers:
hromeTMFirefox®EdgeTMSafari®
Windows®recommendedrecommended
macOS®recommendedrecommended
Linux®recommendedrecommended
Otheroperatingsystems*
*TouseAXISOSwebinterfacewithiOS15oriPadOS15,gotoSettings Settings
Settings> > >Safari Safari Safari> > >Adanced Adanced Adanced> > >Experimental Experimental ExperimentalFeatures Features Featuresanddisable
NSURLSessionWebsocket.
penthedevice'swebpage
1.OpenabrowserandentertheIPaddressorhostnameoftheAxisdevice.
IfyoudonotknowtheIPaddress,useAXISIPUtilityorAXISDeviceManagertondthedeviceonthenetwork.
2.Entertheusernameandpassword.Ifyouaccessthedeviceforthersttime,youmustsettherootpassword.SeeSeta
newpasswordfortherootaccountonpage4.
Setanewpasswordfortherootaccount
Thedefaultadministratorusernameisroot.There’snodefaultpasswordfortherootaccount.Yousetapasswordtherst
timeyoulogintothedevice.
Ifyoulosethepasswordfortherootaccount,gotoResettofactorydefaultsettingsonpage34andfollowtheinstructions.
1.Typeapassword.Followtheinstructionsaboutsecurepasswords.SeeSecurepasswordsonpage4.
2.Retypethepasswordtoconrmthespelling.
3.lickCreatelogin.Thepasswordhasnowbeencongured.
Securepasswords
Important
Axisdevicessendtheinitiallysetpasswordincleartextoverthenetwork.Toprotectyourdeviceaftertherstlogin,set
upasecureandencryptedHTTPSconnectionandthenchangethepassword.
4

AXISD4100-ENetworkStrobeSiren
Getstarted
Thedevicepasswordistheprimaryprotectionforyourdataandservices.Axisdevicesdonotimposeapasswordpolicyasthey
maybeusedinvarioustypesofinstallations.
Toprotectyourdatawestronglyrecommendthatyou:
•Useapasswordwithatleast8characters,preferablycreatedbyapasswordgenerator.
•Don’texposethepassword.
•hangethepasswordatarecurringinterval,atleastonceayear.
Webpageoverview
Thisvideogivesyouanoverviewofthedeviceinterface.
Towatchthisvideo,gotothewebversionofthisdocument.
www.axis.com/products/online-manual/62021#t10157625
Axisdeicewebinterface
5

AXISD4100-ENetworkStrobeSiren
Congureyourdevice
Congureyourdevice
Turnoffmaintenancemodeafterinstallingthesiren
CATION
Toprotecttheinstallerfromhearingdamageandfromdazzlingbybrightlight,it’srecommendedtohavemaintenance
modeonwheninstallingthedevice.
Whenyouinstallthedeviceforthersttime,maintenancemodeisonbydefault.Whenthedeviceisinmaintenancemode,thesiren
makesnosoundandthelightgiveswhitepulsatinglightpatterns.
GotoStatus>MaintenancetoturnoffMaintenancemode.
Turnonmaintenancemode
Toperformserviceofthedevice,gotoStatus>MaintenanceandturnonMaintenancemode.Ordinarylightandsirenactivitiesare
thenpaused.
Congureaprole
Aproleisacollectionofsetcongurations.Youcanhaveupto30proleswithdifferentprioritiesandpatterns.
Tosetanewprole:
1.GotoProlesandclickAddprole.
2.SelectCreateandclickNext.
3.EnteraNameandDescription.
4.SelecttheLightandSirensettingsthatyouwantforyourprole.
5.SetthelightandsirenPriorityandclickNext.
6.lickSave.
Toeditaprole,clickandselectEdit.
Importorexportaprole
Ifyouwanttouseaprolewithpredenedcongurations,youcanimportit:
1.GotoProlesandclickAddprole.
2.SelectImportandclickNext.
3.Browsetolocatetheleordraganddropthelethatyouwanttoimport.
4.lickNextandInstall.
Tocopyoneormoreprolesandsavetootherdevices,youcanexportthem:
1.Selecttheproles.
6

AXISD4100-ENetworkStrobeSiren
Congureyourdevice
2.lickExport.
3.Browsetolocatethe.jsonles.
Setuprulesforevents
Tolearnmore,checkoutourguideGetstartedwithrulesforeents.
Triggeranaction
1.GotoSystem>Eventsandaddarule.Theruledeneswhenthedevicewillperformcertainactions.Youcanset
uprulesasscheduled,recurring,ormanuallytriggered.
2.EnteraName.
3.SelecttheConditionthatmustbemettotriggertheaction.Ifyouspecifymorethanoneconditionfortherule,allofthe
conditionsmustbemettotriggertheaction.
4.SelectwhichActionthedeviceshouldperformwhentheconditionsaremet.
Note
Ifyoumakechangestoanactiverule,therulemustbeturnedonagainforthechangestotakeeffect.
Startaprolewhenanalarmistriggered
Thisexampleexplainshowtotriggeranalarmwhenthedigitalinputsignalischanged.
Setdirectioninputfortheport:
1.GotoSystem>Accessories>I/Oports.
2.GotoPort1>NormalpositionandclickCircuitclosed.
reatearule:
1.GotoSystem>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectI/O>Digitalinput.
4.SelectPort1.
5.Inthelistofactions,selectRunlightandsirenprolewhiletheruleisactive.
6.Selecttheproleyouwanttostart.
7.lickSave.
StartaproleviaSIP
ThisexampleexplainshowtotriggeranalarmwithSIP.
ActivateSIP:
1.GotoSystem>SIP>SIPsettings.
2.SelectEnableSIPandAllowincomingcalls.
3.lickSave.
reatearule:
7

AXISD4100-ENetworkStrobeSiren
Congureyourdevice
1.GotoSystem>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectCall>State.
4.Inthelistofstate,selectActive.
5.Inthelistofactions,selectRunlightandsirenprolewhiletheruleisactive.
6.Selecttheproleyouwanttostart.
7.lickSave.
Runtwoproleswithdifferentpriorities
Ifyouruntwoproleswithdifferentpriorities,theprolewithahigherprioritynumberwillinterrupttheprolewithalower
prioritynumber.
Note
Ifyouruntwoproleswiththesamepriority,themostrecentprolewillcancelthepreviousone.
Thisexampleexplainshowtosetthedevicetoshowoneprolewithpriority4overanotherprolewithpriority3whentriggeredby
thedigitalI/Oport.
reateproles:
1.reateaprolewithpriority3.
2.reateanotherprolewithpriority4.
reatearule:
1.GotoSystem>Eventsandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,selectI/O>Digitalinput.
4.Selectaport.
5.Inthelistofactions,selectRunlightandsirenprolewhiletheruleisactive.
6.Selecttheprolethathasthehighestprioritynumber.
7.lickSave.
8.GotoProlesandstarttheprolewiththelowestprioritynumber.
Activatestrobesirenwhencameradetectsmotion
Thisexampleexplainshowconnectacameratothestrobesiren,andactivateaproleinthestrobesirenwhenevertheapplication
AXISMotionGuard,installedinthecamera,detectsmotion.
Prerequisites
•reateanewuserwiththeroleOperatororAdministratorinthestrobesiren.
•reateaproleinthestrobesiren.
•SetupAXISMotionGuardinthecameraandcreateaprolecalled“ProleA”.
Createtworecipientsinthecamera
8

AXISD4100-ENetworkStrobeSiren
Congureyourdevice
1.Inthecamera’sdeviceinterface,gotoSystem>Events>Recipientsandaddarecipient.
2.Enterthefollowinginformation:
-Name:Activatevirtualport
-Type:HTTP
-RL:http://<IPaddress>/axis-cgi/virtualinput/activate.cgi
Replace<IPaddress>withtheaddressofthestrobesiren.
-Theusernameandpasswordofthenewlycreatedstrobesirenuser.
3.lickTesttomakesurealldataisvalid.
4.lickSave.
5.Addasecondrecipientwiththefollowinginformation:
-Name:Deactivatevirtualport
-Type:HTTP
-RL:http://<IPaddress>/axis-cgi/virtualinput/deactivate.cgi
Replace<IPaddress>withtheaddressofthestrobesiren.
-Theusernameandpasswordofthenewlycreatedstrobesirenuser.
6.lickTesttomakesurealldataisvalid.
7.lickSave.
Createtworulesinthecamera
1.GotoRulesandaddarule.
2.Enterthefollowinginformation:
-Name:ActivatevirtualIO1
-Condition:Applications>MotionGuard:ProleA
-Action:Notications>SendnoticationthroughHTTP
-Recipient:Activatevirtualport
-Querystringsufx:schemaversion=1&port=1
3.lickSave.
4.Addanotherrulewiththefollowinginformation:
-Name:DeactivatevirtualIO1
-Condition:Applications>MotionGuard:ProleA
-SelectInvertthiscondition.
-Action:Notications>SendnoticationthroughHTTP
-Recipient:Deactivatevirtualport
-Querystringsufx:schemaversion=1&port=1
5.lickSave.
9

AXISD4100-ENetworkStrobeSiren
Congureyourdevice
Createaruleinthestrobesiren
1.Inthestrobesiren’sdeviceinterface,gotoSystem>Eventsandaddarule.
2.Enterthefollowinginformation:
-Name:Triggeronvirtualinput1
-Condition:I/O>Virtualinput
-Port:1
-Action:Lightandsiren>Runlightandsirenprolewhiletheruleisactive
-Prole:selectthenewlycreatedprole
3.lickSave.
ActivatestrobesirenoverMQTTwhencameradetectsmotion
ThisexampleexplainshowconnectacameratothestrobesirenoverMQTT,andactivateaproleinthestrobesirenwheneverthe
applicationAXISMotionGuard,installedinthecamera,detectsmotion.
Prerequisites
•reateaproleinthestrobesiren.
•SetupanMQTTbrokerandgetthebroker’sIPaddress,usernameandpassword.
•SetupAXISMotionGuardinthecamera.
SetuptheMQTTclientinthecamera
1.Inthecamera’sdeviceinterface,gotoSystem>MQTT>MQTTclient>Brokerandenterthefollowinginformation:
-Host:BrokerIPaddress
-ClientID:Forexampleamera1
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-ThebrokersernameandPassword
2.lickSaveandConnect.
CreatetworulesinthecameraforMQTTpublishing
1.GotoSystem>Events>Rulesandaddarule.
2.Enterthefollowinginformation:
-Name:Motiondetected
-Condition:Applications>Motionalarm
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:On
-QoS:0,1or2
3.lickSave.
10

AXISD4100-ENetworkStrobeSiren
Congureyourdevice
4.Addanotherrulewiththefollowinginformation:
-Name:Nomotion
-Condition:Applications>Motionalarm
-SelectInvertthiscondition.
-Action:MQTT>SendMQTTpublishmessage
-Topic:Motion
-Payload:Off
-QoS:0,1or2
5.lickSave.
SetuptheMQTTclientinthestrobesiren
1.Inthestrobesiren’sdeviceinterface,gotoSystem>MQTT>MQTTclient>Brokerandenterthefollowinginformation:
-Host:BrokerIPaddress
-ClientID:Siren1
-Protocol:Theprotocolthebrokerissetto
-Port:Theportnumberusedbythebroker
-sernameandPassword
2.lickSaveandConnect.
3.GotoMQTTsubscriptionsandaddasubscription.
Enterthefollowinginformation:
-Subscriptionlter:Motion
-Subscriptiontype:Stateful
-QoS:0,1or2
4.lickSave.
CreatearuleinthestrobesirenforMQTTsubscriptions
1.GotoSystem>Events>Rulesandaddarule.
2.Enterthefollowinginformation:
-Name:Motiondetected
-Condition:MQTT>Stateful
-Subscriptionlter:Motion
-Payload:On
-Action:Lightandsiren>Runlightandsirenprolewhiletheruleisactive
-Prole:Selecttheproleyouwanttobeactive.
3.lickSave.
11

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
Thedeviceinterface
Showorhidethemainmenu.
Accesstheproducthelp.
hangethelanguage.
Setlightthemeordarktheme.
Seeinformationabouttheuserwhoisloggedin.
Thecontextmenucontains:
•Analyticsdata:Accepttosharenon-personalbrowserdata.
•Feedback:Shareanyfeedbacktohelpusimproveyouruserexperience.
•Legal:Viewinformationaboutcookiesandlicenses.
•About:Viewdeviceinformation,includingrmwareversionandserialnumber.
Status
NTPsync
ShowsNTPsynchronizationinformation,includingifthedeviceisinsyncwithanNTPserverandthetimeremaininguntil
thenextsync.
NTPsettings:licktogototheDateandtimepagewhereyoucanchangetheNTPsettings.
Deviceinfo
Showsdeviceinformation,includingrmwareversionandserialnumber.
pgradermware:licktogototheMaintenancepagewhereyoucandoarmwareupgrade.
verview
Lightstatus
Showsthedifferentlightactivitiesrunningonthedevice.Youcanhavetenactivitiesinthestatuslistrunningatthesame
time.Whentwoormoreactivitiesrunatthesametime,theonewiththehighestpriorityisplayed.Thatrowishighlighted
ingreeninthestatuslist.
Sirenstatus
Showsthedifferentsirenactivitiesrunningonthedevice.Youcanhavetenactivitiesinthestatuslistrunningatthesame
time.Whentwoormoreactivitiesrunatthesametime,theonewiththehighestpriorityisplayed.Thatrowishighlighted
ingreeninthestatuslist.
Maintenance
12

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
Maintenancemode:Turnontopausetheordinarylightandsirenactivitiesduringmaintenanceofthedevice.Whenmaintenance
modeisturnedon,apulsatinglightpatternisplayedandthesirenissilent.Toprotecttheinstallerfromhearingdamageandfrom
dazzlingbybrightlight,thesirenmakesnosoundandthelightgiveswhitepulsatinglightinatriangle.
Maintenancehaspriority11.Onlysystemspecicactivitieswithhigherprioritycandisruptthemaintenancemode.
Maintenancemodesurvivesareboot.Forexample,ifyousetthetimeto2hours,turnoffthedeviceandrestartitonehourlater,
thedevicewillbeinmaintenancemodeforanotherhour.
Whenyoudoadefaultreset,thedevicereturnstomaintenancemode.
Duration
•Continuous:Selecttoletthedevicestayinmaintenancemodeuntilyouturnitoff.
•Time:Selecttosetatimewhenthemaintenancemodewillbeturnedoff.
Healthcheck
Check:licktodoahealthcheckofthedevicetomakesurethelightandsirenareworking.Eachlightsectionisturnedon
inturnandatesttoneisplayedtotestthefunctionalityofthedevice.Ifthehealthcheckdoesn’tpass,gotothesystem
logsformoreinformation.
Proles
Proles
Aproleisacollectionofsetcongurations.Youcanhaveupto30proleswithdifferentprioritiesandpatterns.
Addprole:licktoaddaprole.
•Create:reateanewprole
-Name:Enteranameoftheprole.
-Description:Enteradescriptionoftheprole.
-Light:Selectfromthedrop-downmenuwhatkindofpattern,speed,intensityandcolorofthelightyouwant.
-Siren:Selectfromthedrop-downmenuwhatkindofpatternandintensityofthesirenyouwant.
-Duration:Setthedurationoftheactivities.
-Continuous:Oncestarted,itrunsuntilit’sstopped.
-Time:Setaspeciedtimeforhowlongtheactivitywilllast.
-Repetitions:SettheactivitytorepeatthepatternXtimes.
-Priority:Setthepriorityofanactivityfrom1to10.Activitieswithprioritynumbershigherthan10cannot
beremovedfromthestatuslist.Therearethreeactivitieswithhigherprioritythan10,Maintenance(11),
Identify(12)andHealthcheck(13).
•Import:Addoneormoreproleswithpredenedcongurations.
-Add:Addnewproles.
Note
Youcan’thavetwoproleswiththesamename.
-Deleteandadd:Theoldprolesaredeleted,andyoucanuploadnewproles.
-Overwrite:Updatedprolesoverwritetheexistingproles.
Tocopyaproleandsaveittootherdevices,selecttheproleandclickExport.A.jsonleisexported.
:licktostartaprole.Theproleanditsactivitiesappearinthestatuslist.
13

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
Apps
Addapp:licktoinstallanewapp.
Findmoreapps:licktogotoanoverviewpageofAxisapps.
Thecontextmenucontains:
•Applog:licktoviewalogoftheappevents.Thelogishelpfulwhenyoucontactsupport.
•Activatelicensewithakey:Iftheapprequiresalicense,youneedtoactivateit.Usethisoptionifyourdevice
doesn’thaveinternetaccess.
Ifyoudon’thavealicensekey,gotoaxis.com/applications.YouneedalicensecodeandtheAxisproductserial
numbertogeneratealicensekey.
•Activatelicenseautomatically:Iftheapprequiresalicense,youneedtoactivateit.Usethisoptionifyourdevicehas
internetaccess.Youneedalicensecodetoactivatethelicense.
•Deactivatethelicense:Deactivatethelicensetouseitinanotherdevice.Ifyoudeactivatethelicense,youalso
removeitfromthedevice.Todeactivatethelicenserequiresinternetaccess.
•Delete:Deletetheapppermanentlyfromthedevice.Ifyoudon’tdeactivatethelicenserst,itremainsactive.
Note
Thedevice’sperformancemightbeaffectedifyourunseveralappsatthesametime.
Start:Startorstoptheapp.
Open:licktoaccesstheapp’ssettings.Theavailablesettingsdependontheapplication.Someapplicationsdon’thaveany
settings.
System
Dateandtime
Thetimeformatdependsonthewebbrowser’slanguagesettings.
Note
Werecommendyoutosynchronizethedevice’sdateandtimewithanNTPserver.
Synchronization:Selectanoptionforsynchronizingthedevice’sdateandtime.
•Automaticdateandtime(NTPserverusingDHCP):SynchronizewiththeNTPserverconnectedtotheDHPserver.
•Automaticdateandtime(manualNTPserver):SynchronizewithNTPserversofyourchoice.
-PrimaryNTPserverandSecondaryNTPserver:EntertheIPaddressofoneortwoNTPservers.Whenyouuse
twoNTPservers,thedevicesynchronizesandadaptsitstimebasedoninputfromboth.
•Customdateandtime:Manuallysetthedateandtime.lickGetfromsystemtofetchthedateandtimesettings
oncefromyourcomputerormobiledevice.
Timezone:Selectwhichtimezonetouse.Timewillbeautomaticallyadjustedfordaylightsavingtimeandstandardtime.
Note
Thesystemusesthedateandtimesettingsinallrecordings,logsandsystemsettings.
Network
IPv4andIPv6
14

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
IPv4
•AutomaticIP(DHCP)andDNS(DHCP):Therecommendedsettingformostnetworks.Thecurrentsettingsare
updatedautomatically.
•AutomaticIP(DHCP)andmanualDNS:ontactyournetworkadministratortocongurethemanualsettings.The
currentautomaticsettingsareupdatedautomatically.
•ManualIPandDNS:ontactyournetworkadministratortocongurethesettings.
IPaddress:EnterauniqueIPaddressforthedevice.StaticIPaddressescanbeassignedatrandomwithinisolatednetworks,
providedthateachaddressisunique.Toavoidconicts,werecommendyoutocontactyournetworkadministratorbeforeyou
assignastaticIPaddress.
Subnetmask:Enterthesubnetmask.
Router:EntertheIPaddressofthedefaultrouter(gateway)usedtoconnectdevicesthatareattachedtodifferentnetworksand
networksegments.
Hostname:Enterthehostname.
Searchdomains:Whenyouuseahostnamethatisnotfullyqualied,clickAddsearchdomainandenteradomaininwhichto
searchforthehostnameusedbythedevice.
DNSservers:lickAddDNSserverandentertheIPaddressoftheprimaryDNSserver.Thisprovidesthetranslationofhostnames
toIPaddressesonyournetwork.
IPv6
AssignIPv6automatically:SelecttoletthenetworkrouterassignanIPaddresstothedeviceautomatically.
HTTPandHTTPS
Allowaccessthrough:SelectifauserisallowedtoconnecttothedevicethroughtheHTTP,HTTPS,orbothHTTPandHTTPS
protocols.
HTTPSisaprotocolthatprovidesencryptionforpagerequestsfromusersandforthepagesreturnedbythewebserver.The
encryptedexchangeofinformationisgovernedbytheuseofanHTTPScerticate,whichguaranteestheauthenticityoftheserver.
TouseHTTPSonthedevice,youmustinstallanHTTPScerticate.GotoSystem>Securitytocreateandinstallcerticates.
Note
IfyouviewencryptedwebpagesthroughHTTPS,youmightexperienceadropinperformance,especiallywhenyou
requestapageforthersttime.
HTTPport:EntertheHTTPporttouse.Port80oranyportintherange1024-65535areallowed.Ifyouareloggedinasan
administrator,youcanalsoenteranyportintherange1-1023.Ifyouuseaportinthisrange,yougetawarning.
HTTPSport:EntertheHTTPSporttouse.Port443oranyportintherange1024-65535areallowed.Ifyouareloggedinasan
administrator,youcanalsoenteranyportintherange1-1023.Ifyouuseaportinthisrange,yougetawarning.
Certicate:SelectacerticatetoenableHTTPSforthedevice.
Friendlyname
Bonjour®:Turnontoallowautomaticdiscoveryonthenetwork.
Bonjourname:Enterafriendlynametobevisibleonthenetwork.ThedefaultnameisthedevicenameandMAaddress.
sePnP®:Turnontoallowautomaticdiscoveryonthenetwork.
PnPname:Enterafriendlynametobevisibleonthenetwork.ThedefaultnameisthedevicenameandMAaddress.
One-clickcloudconnection
15

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
One-clickcloudconnection(O3)togetherwithanO3serviceprovideseasyandsecureinternetaccesstoliveandrecordedvideo
fromanylocation.Formoreinformation,seeaxis.com/end-to-end-solutions/hosted-serices.
AllowO3C:
•One-click:Thedefaultsetting.PressandholdthecontrolbuttononthedevicetoconnecttoanO3serviceoverthe
internet.YouneedtoregisterthedevicewiththeO3servicewithin24hoursafteryoupressthecontrolbutton.
Otherwise,thedevicedisconnectsfromtheO3service.Onceyouhaveregisteredthedevice,Alwaysisenabledand
thedevicestaysconnectedtotheO3service.
•Always:ThedeviceconstantlyattemptstoconnecttoanO3serviceovertheinternet.Onceyouhaveregisteredthe
device,itstaysconnectedtotheO3service.Usethisoptionifthecontrolbuttononthedeviceisoutofreach.
•No:DisablestheO3service.
Proxysettings:Ifneeded,entertheproxysettingstoconnecttotheHTTPserver.
Host:Entertheproxyserver’saddress.
Port:Entertheportnumberusedforaccess.
LoginandPassword:Ifneeded,enterusernameandpasswordfortheproxyserver.
Authenticationmethod:
•Basic:ThismethodisthemostcompatibleauthenticationschemeforHTTP.It’slesssecurethantheDigestmethod
becauseitsendstheusernameandpasswordunencryptedtotheserver.
•Digest:Thismethodismoresecurebecauseitalwaystransfersthepasswordencryptedacrossthenetwork.
•Auto:Thisoptionletsthedeviceselecttheauthenticationmethoddependingonthesupportedmethods.Itprioritizes
theDigestmethodovertheBasicmethod.
Ownerauthenticationkey(OAK):lickGetkeytofetchtheownerauthenticationkey.Thisisonlypossibleifthedeviceis
connectedtotheinternetwithoutarewallorproxy.
SNMP
TheSimpleNetworkManagementProtocol(SNMP)allowsremotemanagementofnetworkdevices.
SNMP:SelecttheversionofSNMPtouse.
•v1andv2c:
-Readcommunity:Enterthecommunitynamethathasread-onlyaccesstoallsupportedSNMPobjects.The
defaultvalueispublic.
-Writecommunity:Enterthecommunitynamethathasread/writeaccesstoallsupportedSNMPobjects
(exceptread-onlyobjects).Thedefaultvalueiswrite.
-Activatetraps:Turnontoactivatetrapreporting.Thedeviceusestrapstosendmessagesforimportant
eventsorstatuschangestoamanagementsystem.Inthedeviceinterface,youcansetuptrapsforSNMPv1
andv2c.TrapsareautomaticallyturnedoffifyouchangetoSNMPv3orturnoffSNMP.IfyouuseSNMPv3,
youcansetuptrapsthroughtheSNMPv3managementapplication.
-Trapaddress:EntertheIPaddressorhostnameofthemanagementserver.
-Trapcommunity:Enterthecommunitytousewhenthedevicesendsatrapmessagetothemanagement
system.
-Traps:
-Coldstart:Sendsatrapmessagewhenthedevicestarts.
-Warmstart:SendsatrapmessagewhenyouchangeanSNMPsetting.
-Linkup:Sendsatrapmessagewhenalinkchangesfromdowntoup.
-Authenticationfailed:Sendsatrapmessagewhenanauthenticationattemptfails.
Note
AllAxisVideoMIBtrapsareenabledwhenyouturnonSNMPv1andv2ctraps.Formoreinformation,see
AXISOSPortal>SNMP.
•v3:SNMPv3isamoresecureversion,whichprovidesencryptionandsecurepasswords.TouseSNMPv3,we
recommendyoutoactivateHTTPS,asthepasswordisthensentthroughHTTPS.Thisalsopreventsunauthorized
partiestoaccessunencryptedSNMPv1andv2ctraps.IfyouuseSNMPv3,youcansetuptrapsthroughtheSNMPv3
managementapplication.
16

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
-Passwordfortheaccount“initial”:EntertheSNMPpasswordfortheaccountnamed“initial”.Althoughthe
passwordcanbesentwithoutactivatingHTTPS,wedon’trecommendit.TheSNMPv3passwordcanonly
besetonce,andpreferablyonlywhenHTTPSisenabled.Oncethepasswordisset,thepasswordeldisno
longerdisplayed.Tosetthepasswordagain,youmustresetthedevicetofactorydefaultsettings.
Connectedclients
Thelistshowsallclientsthatareconnectedtothedevice.
pdate:licktorefreshthelist.
Security
Certicates
erticatesareusedtoauthenticatedevicesonanetwork.Thedevicesupportstwotypesofcerticates:
•Client/servercerticates
Aclient/servercerticatevalidatesthedevice’sidentity,andcanbeself-signedorissuedbyaerticateAuthority(A).
Aself-signedcerticateofferslimitedprotectionandcanbeusedbeforeaA-issuedcerticatehasbeenobtained.
•CAcerticates
YoucanuseaAcerticatetoauthenticateapeercerticate,forexampletovalidatetheidentityofanauthentication
serverwhenthedeviceconnectstoanetworkprotectedbyIEEE802.1X.Thedevicehasseveralpre-installedA
certicates.
Theseformatsaresupported:
•erticateformats:.PEM,.ER,and.PFX
•Privatekeyformats:PKS#1andPKS#12
Important
Ifyouresetthedevicetofactorydefault,allcerticatesaredeleted.Anypre-installedAcerticatesarereinstalled.
Filterthecerticatesinthelist.
Addcerticate:licktoaddacerticate.
Thecontextmenucontains:
•Certicateinformation:Viewaninstalledcerticate’sproperties.
•Deletecerticate:Deletethecerticate.
•Createcerticatesigningrequest:reateacerticatesigningrequesttosendtoaregistrationauthoritytoapply
foradigitalidentitycerticate.
IEEE802.1x
17

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
IEEE802.1xisanIEEEstandardforport-basednetworkadmissioncontrolprovidingsecureauthenticationofwiredandwireless
networkdevices.IEEE802.1xisbasedonEAP(ExtensibleAuthenticationProtocol).
ToaccessanetworkprotectedbyIEEE802.1x,networkdevicesmustauthenticatethemselves.Theauthenticationisperformedby
anauthenticationserver,typicallyaRADIUSserver(forexampleFreeRADIUSandMicrosoftInternetAuthenticationServer).
Certicates
WhenconguredwithoutaAcerticate,servercerticatevalidationisdisabledandthedevicetriestoauthenticateitself
regardlessofwhatnetworkitisconnectedto.
Whenusingacerticate,inAxis'implementation,thedeviceandtheauthenticationserverauthenticatethemselveswithdigital
certicatesusingEAP-TLS(ExtensibleAuthenticationProtocol-TransportLayerSecurity).
Toallowthedevicetoaccessanetworkprotectedthroughcerticates,asignedclientcerticatemustbeinstalledonthedevice.
Clientcerticate:SelectaclientcerticatetouseIEEE802.1x.Theauthenticationserverusesthecerticatetovalidatethe
client’sidentity.
CAcerticate:SelectaAcerticatetovalidatetheauthenticationserver’sidentity.Whennocerticateisselected,thedevice
triestoauthenticateitselfregardlessofwhatnetworkitisconnectedto.
EAPidentity:Entertheuseridentityassociatedwiththeclientcerticate.
EAPOLversion:SelecttheEAPOLversionthatisusedinthenetworkswitch.
seIEEE802.1x:SelecttousetheIEEE802.1xprotocol.
Preventbrute-forceattacks
Blocking:Turnontoblockbrute-forceattacks.Abrute-forceattackusestrial-and-errortoguesslogininfoorencryptionkeys.
Blockingperiod:Enterthenumberofsecondstoblockabrute-forceattack.
Blockingconditions:Enterthenumberofauthenticationfailuresallowedpersecondbeforetheblockstarts.Youcansetthe
numberoffailuresallowedbothonpagelevelanddevicelevel.
IPaddresslter
selter:SelecttolterwhichIPaddressesthatareallowedtoaccessthedevice.
Policy:hoosewhethertoAllowaccessorDenyaccessforcertainIPaddresses.
Addresses:EntertheIPnumbersthatareeitherallowedordeniedaccesstothedevice.YoucanalsousetheIDRformat.
Custom-signedrmwarecerticate
ToinstalltestrmwareorothercustomrmwarefromAxisonthedevice,youneedacustom-signedrmwarecerticate.The
certicateveriesthatthermwareisapprovedbyboththedeviceownerandAxis.Thermwarecanonlyrunonaspecic
devicewhichisidentiedbyitsuniqueserialnumberandchipID.ustom-signedrmwarecerticatescanonlybecreated
byAxis,sinceAxisholdsthekeytosignthem.
lickInstalltoinstallthecerticate.Youneedtoinstallthecerticatebeforeyouinstallthermware.
18

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
Users
Adduser:licktoaddanewuser.Youcanaddupto100users.
sername:Enterauniqueusername.
Newpassword:Enterapasswordfortheuser.Passwordsmustbe1to64characterslong.OnlyASIIprintablecharacters(code
32to126)areallowedinthepassword,forexampleletters,numbers,punctuation,andsomesymbols.
Repeatpassword:Enterthesamepasswordagain.
Role:
•Administrator:Hasfullaccesstoallsettings.Administratorscanalsoadd,update,andremoveotherusers.
•Operator:Hasaccesstoallsettingsexcept:
-AllSystemsettings.
-Addingapps.
Thecontextmenucontains:
pdateuser:Edittheuser’sproperties.
Deleteuser:Deletetheuser.Youcan’tdeletetherootuser.
Anonymoususers
Allowanonymousviewers:Turnontoallowanyonetoaccessthedeviceasaviewerwithouthavingtologinwithauseraccount.
AllowanonymousPTZoperators:Turnontoallowanonymoususerstopan,tilt,andzoomtheimage.
Events
Rules
Aruledenestheconditionsthatmustbemetfortheproducttoperformanaction.Thelistshowsallthecurrentlycongured
rulesintheproduct.
Note
Youcancreateupto256actionrules.
Addarule:licktocreatearule.
Name:Enteranamefortherule.
Waitbetweenactions:Entertheminimumtime(hh:mm:ss)thatmustpassbetweenruleactivations.Itisusefuliftheruleis
activatedbyforexampleday-nightmodeconditions,toavoidthatsmalllightchangesduringsunriseandsunsetactivate
therulerepeatedly.
Condition:Selectaconditionfromthelist.Aconditionmustbemetforthedevicetoperformanaction.Ifmultiple
conditionsaredened,allofthemmustbemettotriggertheaction.Forinformationaboutspecicconditions,see
Getstartedwithrulesforeents.
sethisconditionasatrigger:Selecttomakethisrstconditionfunctiononlyasastartingtrigger.Itmeansthatoncetherule
isactivateditremainsactiveforaslongasalltheotherconditionsaremet,nomatterthestateoftherstcondition.Ifyoudon’t
selectthisoption,therulewillsimplybeactivewheneveralltheconditionsaremet.
Invertthiscondition:Selectifyouwanttheconditiontobetheoppositeofyourselection.
19

AXISD4100-ENetworkStrobeSiren
Thedeviceinterface
Addacondition:licktoaddanadditionalcondition.
Action:Selectanactionfromthelistandenteritsrequiredinformation.Forinformationaboutspecicactions,see
Getstartedwithrulesforeents.
Recipients
Youcansetupyourdevicetonotifyrecipientsabouteventsorsendles.Thelistshowsalltherecipientscurrentlyconguredin
theproduct,alongwithinformationabouttheirconguration.
Note
Youcancreateupto20recipients.
Addarecipient:licktoaddarecipient.
Name:Enteranamefortherecipient.
Type:Selectfromthelist:
•FTP
-Host:Entertheserver'sIPaddressorhostname.Ifyouenterahostname,makesurethataDNSserveris
speciedunderSystem>Network>IPv4andIPv6.
-Port:EntertheportnumberusedbytheFTPserver.Thedefaultis21.
-Folder:Enterthepathtothedirectorywhereyouwanttostoreles.Ifthisdirectorydoesn’talreadyexist
ontheFTPserver,youwillgetanerrormessagewhenuploadingles.
-sername:Entertheusernameforthelogin.
-Password:Enterthepasswordforthelogin.
-setemporarylename:Selecttouploadleswithtemporary,automaticallygeneratedlenames.The
lesgetrenamedtothedesirednameswhentheuploadcompletes.Iftheuploadisaborted/interrupted,
youdon’tgetanycorruptles.However,youprobablystillgetthetemporaryles.Thiswayyouknowthat
alllesthathavethedesiredname,arecorrect.
-sepassiveFTP:UndernormalcircumstancestheproductsimplyrequeststhetargetFTPservertoopenthe
dataconnection.ThedeviceactivelyinitiatesboththeFTPcontrolanddataconnectionstothetargetserver.
ThisisnormallyneededifthereisarewallbetweenthedeviceandthetargetFTPserver.
•HTTP
-RL:EnterthenetworkaddresstotheHTTPserverandthescriptthatwillhandletherequest.Forexample:
http://192.168.254.10/cgi-bin/notify.cgi.
-sername:Entertheusernameforthelogin.
-Password:Enterthepasswordforthelogin.
-Proxy:TurnonandentertherequiredinformationifaproxyservermustbepassedtoconnecttotheHTTP
server.
•HTTPS
-RL:EnterthenetworkaddresstotheHTTPSserverandthescriptthatwillhandletherequest.Forexample:
https://192.168.254.10/cgi-bin/notify.cgi.
-Validateservercerticate:SelecttovalidatethecerticatethatwascreatedbyHTTPSserver.
-sername:Entertheusernameforthelogin.
-Password:Enterthepasswordforthelogin.
-Proxy:TurnonandentertherequiredinformationifaproxyservermustbepassedtoconnecttotheHTTPS
server.
•Networkstorage
YoucanaddnetworkstoragesuchasaNAS(NetworkAttachedStorage)anduseitasarecipienttostoreles.
ThelesarestoredintheMatroska(MKV)leformat.
-Host:EntertheIPaddressorhostnameforthenetworkstorage.
-Share:Enterthenameoftheshareonthehost.
-Folder:Enterthepathtothedirectorywhereyouwanttostoreles.
-sername:Entertheusernameforthelogin.
-Password:Enterthepasswordforthelogin.
20