Axis T8343 User manual

AXIS T8343 Alert Button
Installation Guide
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Read this rst
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide
for future reference.
Legal considerations
Video and audio surveillance can be regulated by
laws that vary from country to country. Check the
laws in your local region before using this product
for surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local xis ofce of
any inaccuracies or omissions. xis Communications
B cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. xis Communications B makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and tness
2
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

for aparticular purpose. xis Communications B
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Equi ment modications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modications will invalidate
all applicable regulatory certications and approvals.
Trademark acknowledgements
XIS COMMUNIC TIONS, XIS and V PIX are
registered trademarks or trademark applications of
xis B in various jurisdictions. ll other company
names and products are trademarks or registered
trademarks of their respective companies.
3
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Z-Wave and Z-Wave Plus are registered trademarks
of Sigma Designs and its subsidiaries in the United
States and other countries.
Regulatory information
Electromagnetic com atibility (EMC)
This equipment has been designed and tested to
fulll applicable standards for:
• Radio frequency emission when installed
according to the instructions and used in its
intended environment.
• Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended environment.
USA
This equipment has been tested and found to
comply with the limits for aClass Bdigital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in aresidential installation. This
4
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in aparticular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Canada
This digital apparatus complies with
C N ICES-3 (Class B). Cet appareil numérique
est conforme àla norme C N NMB-3 (classe B).
Japan
5
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

この装置は、クラスB 情報技術装置です。こ
の装置は、家庭環境で使⽤することを⽬ 的
としていますが、この装置がラジオやテレビ
ジョン受信機に近接して使⽤されると、 受信
障害を引き起こすことがあります。 取扱説明
書に従って正しい取り扱いをして下さい。
Radio transmission
This equipment may generate or use radio frequency
energy. The user could lose the authority to operate
this equipment if an unauthorized change or
modication is made.
USA
This equipment complies with the limits for aClass B
digital device, pursuant to part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesirable operation.
6
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

This product complies with FCC radiation exposure
limits for an uncontrolled environment. This
equipment shall be installed and operated with a
minimum distance of 20 cm (7.9 in) between the user
and the device.
Canada
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may
not cause interference, and (2) this device must
accept any interference, including interference that
may cause undesired operation of the device.
This product complies with IC radiation exposure
limits for an uncontrolled environment. This
equipment shall be installed and operated with a
minimum distance of 20 cm (7.9 in) between the user
and the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux
conditions suivantes :(1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique
7
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Ce produit est conforme aux limites d'exposition aux
radiations IC pour un environnement non contrôlé.
L’équipement doit être installé et fonctionné à
une distance minimum de 20 cm (7,9 po) entre
l’utilisateur et le dispositif.
Japan
本製品は、特定無線設備の技術基準適合証
明を受けています。
Dis osal and recycling
When this product has reached the end of its
useful life, dispose of it according to local laws
and regulations. For information about your
nearest designated collection point, contact your
local authority responsible for waste disposal. In
accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
8
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

Contact information
xis Communications B
Emdalavägen 14
223 69 Lund
Sweden
Tel: [phone]
Fax: [phone]
axis.com
Warranty information
For information about xis’ product warranty and
thereto related information, go to axis.com/warranty
Su ort
Should you require any technical assistance, please
contact your xis reseller. If your questions cannot
be answered immediately, your reseller will forward
your queries through the appropriate channels to
9
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]

ensure arapid response. If you are connected to the
Internet, you can:
• nd answers to resolved problems in the F Q
database, search by product, category, or phrase
• report problems to xis support staff by logging
in to your private support area
• chat with xis support staff
• visit xis Support at axis.com/support
Learn more!
Visit xis learning center axis.com/academy for
useful trainings, webinars, tutorials and guides.
10
Available from A1 Security Cameras
www.a1securitycameras.com email: [e-mail]