Axis 247S User manual

DATASHEET
The compact AXIS 247S is ideal for installation close to
the analog camera, where space constraints call for an
optimized solution.
Installer-friendly AXIS 247S is powered over Ethernet,
and can also feed the camera with power, eliminating
the need for power outlets.
Analog video is converted to high-quality, de-interlaced,
digital video at up to 30/25 frames per second in 4CIF
resolution. Simultaneous MPEG and Motion JPEG video
streams allow for optimization both on image quality
and bandwidth eciency.
AXIS 247S Video Server is a high-performance, single channel video encoder, oering a perfect
solution for integrating analog cameras into IP-based video surveillance systems. AXIS 247S
is the ideal choice for retail stores, bank oces and other areas where the advantages of a
compact networked video solution are required.
AXIS 247S Video Server
Video encoder solution for ecient and compact installation.
> Compact video
encoder solution
> Powered over Ethernet
with power out for
camera
> High quality,
de-interlaced video
> Audio support
> Powerful event
management
Audio support enables users not only to view, but also
listen in on an area, picking up communication between
intruders or unusual sounds from suspicious activity.
Event management capabilities include multi-window
video motion detection, audio detection and alarm
buering for ecient use of the video surveillance
system.

Technical specications – AXIS 247S Video Server
www.axis.com
©2009 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modications without notice.
32712/EN/R2/0902
Dimensions Optional accessories
More information is available at www.axis.com
For information on AXIS Camera Station and
video management software from
Axis’ Application Development Partners, see
www.axis.com/products/video/software/
Video
Video
compression
MPEG-4 Part 2 (ISO/IEC 14496-2)
Motion JPEG
Resolutions 704x576 to 160x120
Frame rate
MPEG-4
Up to 30/25 (NTSC/PAL) fps at 4CIF
Frame rate
Motion JPEG
Up to 30/25 (NTSC/PAL) fps at VGA, 27/23 fps at 4CIF
Video streaming Simultaneous MPEG-4 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR MPEG-4
Image settings Compression, color
Aspect ratio correction
Text and image overlay
Privacy mask
Deinterlace filter
Audio
Audio streaming One-way
Audio
compression
AAC LC 8 kHz 32 kbit/s
G.711 PCM 64kbit/s
G.726 ADPCM 32 or 24 kbit/s
Audio input/
output
External microphone input or line input
Line level output
Network
Security Password protection, IP address filtering, HTTPS encryption,
IEEE 802.1X network access control
Supported
protocols
IPv4/v6, HTTP, HTTPS, QoS layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP,
TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
System integration
Application
Programming
Interface
Open API for software integration, including VAPIX®
from Axis Communications available at www.axis.com
Intelligent video Video motion detection, active tampering alarm, audio detection
Alarm triggers Intelligent video, external inputs, video loss
Alarm events File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video buffer 9 MB pre- and post-alarm
General
Casing Metal casing
Standalone or with brackets for wall mount
Processors and
memory
ARTPEC A, 32 MB RAM, 8 MB Flash
Power 7 – 15 V DC, max. 5 W or
Power over Ethernet IEEE 802.3af Class 2/3
Connectors Analog composite video BNC input, NTSC/PAL auto-sensing
RJ-45 10BASE-T/100BASE-TX PoE
Power terminal block: Power feed to the camera or alternative
power supply for the video server
I/O Terminal block for 1 alarm input, 1 alarm output
3.5 mm mic/line in, 3.5 mm line out
6 pin Mini-DIN alternative connection for: video in, audio in,
power out
Operating
conditions
0 – 50 °C (32 – 122 °F)
Humidity 20 – 80% RH (non-condensing)
Approvals EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024,
FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B,
C-tick AS/NZS CISPR 22, EN 60950-1
Weight 214 g (0.47 lb)
Included
accessories
Terminal connector kit, Installation Guide,
CD with installation and management tools, software and User’s
Manual, 1 Windows decoder user license
98 mm (3.86”)
99 mm (3.90”)
41 mm (1.61”)
98 mm (3.86”)
99 mm (3.90”)
41 mm (1.61”)