Aztech DSL705EU User manual

User Manual v1.0
Page 1 of 46
DSL705EU
ADSL2+ Ethernet US Combo Modem/Router

User Manual v1.0
Page 2 of 46
Copyright © 2009 All rights reserved.
No part of this document may be reproduced, republished, or retransmitted in any form or by any
means whatsoever, whether electronically or mechanically, including, but not limited to, by way of
photocopying, recording, information recording, or through retrieval systems without the express
written permission of the owner. Product specifications contained in this document are subject to
change without notice. All other company or product names mentioned are used for identification
purposes only and may be trademarks of their respective owners.
LIMITATION OF LIA ILITY AND DAMAGES
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," ASIS. THE MANUFACTURER AND
MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM ALL WARRANTIES,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTA ILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES
ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL
THE SELLERS E LIA LE FOR DAMAGES OR LOSS, INCLUDING UT NOT LIMITED TO DIRECT, INDIRECT,
SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR
LOSS OF USINESS PROFITS, OR DAMAGES FOR LOSS OF USINESS OF ANY CUSTOMER OR ANY THIRD
PARTY ARISING OUT OF THE USE OR THE INA ILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING
UT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR
DOCUMENTATION, OR LOSS OR INACCURACY OF DATA OF ANY KIND, WHETHER ASED ON CONTRACT, TORT
OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES HAVE EEN ADVISED OF THE POSSI ILITY OF SUCH
DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS
ASSUMED Y CUSTOMER. ECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIA LITY FOR DAMAGES, THE A OVE LIMITATION MAY NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE
SELLERS’ TOTAL CUMULATIVE LIA ILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS
SOFTWARE EXCEEDS THE AMOUNT PAID Y CUSTOMER FOR THE PRODUCT.

User Manual v1.0
Page 3 of 46
Table of Contents
About the Product .............................................................................................................. 6
Requirements ..................................................................................................................... 6
Package Contents ............................................................................................................... 6
Device Design ..................................................................................................................... 7
Getting Started ................................................................................................................... 8
Planning Your Network...................................................................................................... 9
Remove or Disable Conflicts .............................................................................................. 9
Internet Sharing, Proxy, and Security Applications ...................................................... 9
Configuring TCP/IP Settings......................................................................................... 10
Configuring Internet Properties ................................................................................... 10
Removing Temporary Internet Files............................................................................ 10
Setting up the Modem ..................................................................................................... 11
Connecting to the Internet............................................................................................... 11
Using WAN Setting ....................................................................................................... 11
Installing the US Driver .............................................................................................. 13
About the WE User Interface ......................................................................................... 15
User Mode..................................................................................................................... 16
asic .......................................................................................................................... 17
Home Tab.................................................................................................................. 17
Quick Setup............................................................................................................... 17
Statistics.................................................................................................................... 18
LAN........................................................................................................................ 18
WAN ...................................................................................................................... 18
Modem Status........................................................................................................... 18
Diaganostics.............................................................................................................. 19
Advanced .................................................................................................................. 20
Port Forwarding........................................................................................................ 20
DMZ ........................................................................................................................... 21

User Manual v1.0
Page 4 of 46
Packet Filtering......................................................................................................... 22
Parental Control........................................................................................................ 23
Admin Mode ................................................................................................................. 24
Home......................................................................................................................... 24
Quick Start................................................................................................................. 24
System ...................................................................................................................... 25
Host Name ............................................................................................................ 25
Time Zone ............................................................................................................. 26
Administrator Settings ......................................................................................... 26
Firmware Upgrade................................................................................................ 27
Configuration Settings.......................................................................................... 27
ackup................................................................................................................... 28
Restore.................................................................................................................. 28
Statistics.................................................................................................................... 29
LAN........................................................................................................................ 29
WAN ...................................................................................................................... 29
ADSL .......................................................................................................................... 29
Modem Status....................................................................................................... 29
ADSL Phy Configuration........................................................................................ 30
WAN .......................................................................................................................... 31
VC Configuration ................................................................................................... 31
WAN Setting.......................................................................................................... 31
Dynamic IP Address.......................................................................................... 32
Static IP Address............................................................................................... 33
PPPoE ................................................................................................................ 33
PPPoA................................................................................................................ 34
ridge................................................................................................................ 34
WAN Status ........................................................................................................... 34
DNS........................................................................................................................ 35
WAN VLAN Config................................................................................................. 35

User Manual v1.0
Page 5 of 46
Diagnostics............................................................................................................ 36
LAN............................................................................................................................ 36
LAN Settings.......................................................................................................... 36
DHCP configuration........................................................................................... 37
DHCP Client List..................................................................................................... 37
Static Routing........................................................................................................ 38
Routing Table List ................................................................................................. 38
Packet Filtering..................................................................................................... 38
Parental Control.................................................................................................... 40
Application Filtering ............................................................................................. 40
Application Server Settings.................................................................................. 41
ACL......................................................................................................................... 41
NAT............................................................................................................................ 42
Port Forwarding.................................................................................................... 42
DMZ ....................................................................................................................... 44
Device Management ................................................................................................ 44
TR069 and TR-064 ................................................................................................ 44
SNMP Settings ...................................................................................................... 45
Regulatory Compliance Notices................................................................................... 46
European Regulations .............................................................................................. 46

User Manual v1.0
Page 6 of 46
About the Product
About the ProductAbout the Product
About the Product
The Aztech DSL705EU ADSL2+ Ethernet MODEM ROUTER is designed with the latest Infineon Amazon SE
chip solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite)
ADSL standard. Aztech DSL705EU also provides higher data transmission rates with ADSL2 (G.992.3 &
G.992.4), ADSL2+ (G.992.5), Extended Reach-ADSL support. This modem/router is able to support to up
to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000
feet for ADSL2+.
Targeted at the residential users, it is for both the single user with ridge mode with host based PPPoE
Client or for multi-users utilizing the DSL705EU inbuilt PPPoE/A, IP routing, NAT functionality to share
the ADSL link.
Aztech DSL705EU also comes with Stateful Packet Inspection firewall and DMZ support for extensive
Internet security for private data against malicious hackers.
Requirements
Requirements Requirements
Requirements
Your computer must meet the following minimum requirements.
o Internet Explorer 6 or Mozilla Firefox
o Ethernet network adapter
o An active DSL Internet account
Package Contents
Package ContentsPackage Contents
Package Contents
Package contents are listed below. For any missing items, please contact your dealer immediately.
Product contents vary for different models.
o DSL705EU
o Ethernet cable
o Telephone cable
o 12V Power Adapter
o Resource CD (Manual & Easy Start Guide)
o POTS Splitter (Optional)

User Manual v1.0
Page 7 of 46
Device Design
Device DesignDevice Design
Device Design
Label
LabelLabel
Label Action
ActionAction
Action Description
DescriptionDescription
Description
1 POWER LED OFF No power is supplied to the device
Steady light Connected to an AC power supply
2 ETHERNET LED Off No Ethernet connection
Steady light Connected to an Ethernet port
4 DSL LED OFF No DSL signal
linking
continuously
DSL is synchronizing
Steady Green DSL is connected
5 INTERNET LED OFF No Internet connection
ON Green color Connected to the Internet
ON Red color Incorrect Internet Account information
linking
6 DSL PORT Connecting the telephone cable
US Port Connecting with the computer through US cable
7 ETHERNET PORT Connecting with the computer through Ethernet
cable
8 RESET UTTON Resetting the device. Press for 10 seconds to reset

User Manual v1.0
Page 8 of 46
the device to its factory default.
9 POWER JACK (12V
DC) Connecting with the 12V power adapter
10 ON/OFF UTTON Switching the device on/off
Getting Started
Getting StartedGetting Started
Getting Started
Setting up the device is easy. The flowchart below provides an outline of the steps you need to
complete the installation. There are brief descriptions beside each step to help you along. Detailed
instructions are provided in the subsequent pages.
Remove/Disable
Conflicts
Plan your Network
Ready to Use
Setup the Modem
Connect to the
Internet
You may need to check some
setting or disable some application
before installation.
Connect the telephone cables,
Ethernet cables, and power adaptor.
Open a browser to access the Web
User Interface or Use your CD Utility

User Manual v1.0
Page 9 of 46
Planning Your Network
Planning Your NetworkPlanning Your Network
Planning Your Network
efore moving ahead to setup your network, it is a good idea to draw out a network diagram to help
identify your network devices and plan out how to connect these devices. The illustration below is an
example of a network diagram.
Remove or Disable Conflicts
Remove or Disable ConflictsRemove or Disable Conflicts
Remove or Disable Conflicts
To make sure the router installation moves on smoothly, you need to remove or disable conflicts that
may interfere the installation. Probable conflicts may include:
o Internet sharing applications
o Proxy software
o Security software
o TCP/IP settings
o Internet properties
o Temporary Internet files
Internet Sharing, Proxy, and
Internet Sharing, Proxy, andInternet Sharing, Proxy, and
Internet Sharing, Proxy, and Security Applications
Security Applications Security Applications
Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the router installation.
These should be removed or disabled before start the installation.

User Manual v1.0
Page 10 of 46
If you have any of the following or similar applications installed on your computer, remove or disable
them according to the manufacturer’s instructions.
Internet Sharing Applications Proxy Software Security Software
Microsoft Internet Sharing WinGate Symantec
WinProxy Zone Alarm
Configuring TCP/IP Settings
Configuring TCP/IP SettingsConfiguring TCP/IP Settings
Configuring TCP/IP Settings
1. Check if your computer uses the default TCP/IP settings.
2. To check the TCP/IP properties:
3. Select Start > Run. This opens the Run dialog box.
4. Enter control ncpa.cpl and then click OK. This opens the Network Connections in your
computer.
5. Right-click LAN and then select Properties. This opens the Local Area Connection Properties
dialog box.
6. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet Protocol
(TCP/IP) dialog box.
7. Select Obtain an IP address automatically.
8. Click OK to close the Internet Protocol (TCP/IP) dialog box.
9. Click OK to close the Local Area Connection Properties dialog box.
Configuring Internet Properties
Configuring Internet PropertiesConfiguring Internet Properties
Configuring Internet Properties
To set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control inetcpl.cpl and then click OK. This opens Internet Properties.
3. Click Connections tab.
4. In the Dial-up and Virtual Private Network settings pane, select never dial a connection.
5. Click OK to close Internet Properties.
Removing Temporary Internet Files
Removing Temporary Internet FilesRemoving Temporary Internet Files
Removing Temporary Internet Files
Temporary Internet files are files from Web sites that are stored in your computer. Delete these files to
clean the cache and remove footprints left by the Web pages you visited.
1. To remove temporary Internet files:
2. Select Start > Run. This opens the Run dialog box.
3. Enter control and then click OK. This opens Control Panel.
4. Double-click Internet Options. This opens Internet Options.

User Manual v1.0
Page 11 of 46
5. In the Temporary Internet Files pane, click Delete Cookies.
6. Click Delete Files.
7. Click OK to close Internet Properties.
Setting up the Modem
Setting up the ModemSetting up the Modem
Setting up the Modem
When installing the modem, find an area where there are enough electrical outlets for the modem,
the main computer, and your other computer devices.
To setup the modem:
1. Plug one end of the Ethernet cable from the modem’s ETHERNET port and then plug the other
end into computer’s ethernet port.
2. Plug one end of the telephone cable to the modem’s DSL port and then plug the other end
into the phone jack.
POTS Splitter
POTS SplitterPOTS Splitter
POTS Splitter
Your phone line carries with it both phone calls and Internet signals. When you are using the Internet,
the connection produces high-pitched tones that can affect your voice calls when using the phone.
Installing a Plain Old Telephone Service (POTS) splitter separates the two signals and eliminates the
noise.
To setup the telephone POTS Splitter:
To setup the telephone POTS Splitter:To setup the telephone POTS Splitter:
To setup the telephone POTS Splitter:
1. Locate the phone jack in your house.
2. Insert the POTS Splitter into the phone jack.
3. Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other
end into the telephone.
4. Connect the power adapter to modem’s power jack then plug it into an electrical outlet.
5. Press ON.
Connecting to the Internet
Connecting to the InternetConnecting to the Internet
Connecting to the Internet
Use Quick Setup to establish an Internet Connection.
Note:
Note: Note:
Note: efore connecting to the Internet, ensure that the DSL LED is ON.
Using Quick Setup
Using Quick SetupUsing Quick Setup
Using Quick Setup
Quick Setup provides the fastest way of connecting to the Internet. Open your Web browser to access
the modem’s web UI.

User Manual v1.0
Page 12 of 46
To connect to the Internet thru Quick Setup using PPPoE connection:
1. Open your Web browser then type 192.168.1.1 into the address bar.
2. This opens the modem’s Web GUI.
3. On the Quick Setup page enter your Internet Account Login Information.
4. Enter your Username on the User name required field.
5. Enter your Password on the Password required field.
6. Set your ISP’s required VPI/VCI on the required field.
Note:
Note:Note:
Note: Please contact your Internet Service Provider to get the required VPI and VCI to establish an Internet
connection.
7. Choose your ISP’s required Connection Type then click Connect.

User Manual v1.0
Page 13 of 46
Installing the US Driver
Installing the US DriverInstalling the US Driver
Installing the US Driver
Use your CD utility to install the US driver.
For WinXP/Vista 32bit
1. Connect your computer to the modems LAN port using an ethernet cable.
2. Run the CD utility, wait until it prompts you to connect your US cable
For WinXP 64bit
1. Connect your computer to the modems US port using a US cable.
2. Run the CD utility, Found New Hardware prompt will appear.
3. Select No, not time then click Next
4. Select Install from a list or specific location then click Next

User Manual v1.0
Page 14 of 46
5. Click Continue Anyway when prompt below appears
6. Click Next to continue when you see the prompt below

User Manual v1.0
Page 15 of 46
7. Click Finish to complete the Installation. Restart your computer once the installation is done.
About the WE User Interface
About the WE User InterfaceAbout the WE User Interface
About the WE User Interface
To Access the Web User Interface
When you modem is already setup open your Web rowser and on the Address bar type in
http://192.168.2.1
Web UI includes the following settings for your modem:
User Mode
Username: user
Password: user

User Manual v1.0
Page 16 of 46
Admin Mode
Username: admin
Password: admin
User Mode
User ModeUser Mode
User Mode
asic
o Home
o Quick Start
o Statistics
o Modem Status
o Diagnostics
Advanced
o Port Forwarding
o DMZ
o Packet Filtering
o Parental Control

User Manual v1.0
Page 17 of 46
asic
asicasic
asic
Home Tab
Home TabHome Tab
Home Tab
This section provides a one-page summary about the WAN, LAN and Firmware information of the
modem.
Quick Setup
Quick SetupQuick Setup
Quick Setup
This section allows user to configure Internet Login Account information to establish an Internet
connection.
1. Go to asic then click Quick Setup.
2. Enter Username and Password provided by your Internet Service Provider.
3. Select the required Connection type of your Interne service provider then click Connect.

User Manual v1.0
Page 18 of 46
Note:
Note:Note:
Note: Please contact your Internet Service Provider if you do not have this information.
Statistics
StatisticsStatistics
Statistics
LAN
LANLAN
LAN
This section provides the Statistics of the LAN interfaces i.e. corresponding bytes transmitted and
received through that interface.
WAN
WANWAN
WAN
This section provides the Statistics of the WAN interfaces i.e. corresponding bytes transmitted and
received through that interface.
Modem Status
Modem StatusModem Status
Modem Status
This section displays the detailed information of the ADSL line quality
ATU- C System Vendor Information
This pane displays the Vendor’s Information
Status

User Manual v1.0
Page 19 of 46
This pane displays the modem’s status.
Rate
This pane displays the downstream and upstream data rate connection.
Information
This pane displays attenuation during upstream and downstream connection. It also displays the Signal
to Noise Ration during upstream and downstream.
Performance
This pane displays the physical ADSL line performance.
Diaganostics
DiaganosticsDiaganostics
Diaganostics
This section allows user to test their ADSL OAM configuration.

User Manual v1.0
Page 20 of 46
Advanced
AdvancedAdvanced
Advanced
Port Forwarding
Port ForwardingPort Forwarding
Port Forwarding
This section allows user to open a specific port so that the remote users accessing services such as the
Web or FTP at your local site via public IP address can be automatically redirected to the local server
configured with the private IP address.
1. Click Advanced then select Port Forwarding.
2. Click Add button to allow user to configure the Port Forwarding settings.