B. Braun AESCULAP OrthoPilot Elite User manual

ORTHOPAEDIC JOINT REPLACEMENT
AESCULAP®OrthoPilot®Elite
GB RECYCLING PASSPORT
FS110, FS111, FS112, FS113 & FS082
DRECYCLINGPASS

3
STATEMENT
We, Aesculap AG
conrm that the products
OrthoPilot®Elite
Article number FS110, FS111, FS112, FS113 and FS082
complies with the following guidelines:
Waste electrical and electronic equipment (WEEE) 2012/19/EU (dated 2012-07-04)
Category 8 product acc. to Annex IA
Electrical and Electronic Equipment Act - ElektroG (Germany),
as well as all legal requirements of the member states of the EEA.
December, 2019
Aesculap AG, Am Aesculap-Platz, 78532 Tuttlingen / Germany
GB

4
OrthoPilot®Elite

5
INFORMATION FOR REUSE AND
TREATMENT
GB
POS. MATERIAL INFORMATION
Reuse
- -
Scrap
110 Camera FS111 Remove: Circuit board > 10cm²
111 Batter y F S111510 Remove: Batteries and accumulators
112 Circuit board F S111534 and FS111533 Remove: Batteries
113 Circuit board FS111530 Remove: Circuit board > 10cm²
114 Circuit board FS111520 Remove: Circuit board > 10cm²
115 Circuit board F S111500 Remove: Circuit board > 10cm²
120 OrthoPilot Panel-PC FS112 Remove: Circuit board > 10cm²
121 B at ter y F S11253 0 Remove: Batteries and accumulators
122 Button cell Remove: Batteries
123 Circuit board FS112503 Remove: Circuit board > 10cm²
124 Circuit board in Panel-PC FS112500 Remove: Circuit board > 10cm²
140 Foot switch FS113 Complete Disposal (contains a battery)
150 Stand FS110 Remove: external Cords
151 Power adapter FS110501 Remove: electronic waste
Optional
160 Power adapter FS112520 Remove: electronic waste
170 Power adapter FS111520 Remove: electronic waste
180 Power cords FS095, FS096, FS097, FS098, FS099 Remove: electronic waste
Recycling
Metal
130 Aluminium All white painted metals (e.g. mobile system)
150 Aluminium-Guss Stand
Stahl Miscellaneous screws and nuts
Plastic
Polyamide (50% Glass) All grey plastics (e.g. cable bracket)
Polycarbonate All white plastics (e.g. Camera housing, Panel-PC-
Backplane)
PVC-Copper Cords
190 Polyethylen, Polystyrol (Foamed plastic) Multipurpose transport box FS082

6
Unit overview complete system
REMOVAL OF HARMFUL SUBSTANCES
GB
Camera FS111
(Pos. 110)
Panel-PC FS112
(Pos. 120)
Mobile System FS110
(Pos. 130)
Foot Switch FS113
(Pos. 140)
Stand
(Pos. 150)
UNIT OVERVIEW

7
Overview Stand of Mobile System FS110 and Foot Switch FS113
REMOVAL OF HARMFUL SUBSTANCES
GB
Stand
(Pos. 150)
Foot Switch FS113
(Pos. 140)
Power adapter FS110501
(Pos. 151)

8
Overview Foot Switch FS113
REMOVAL OF HARMFUL SUBSTANCES
GB
Foot Switch FS113
(Pos. 140)
From above
Foot Switch FS113
(Pos. 140)
From below

9
Overview Mobile system FS110
REMOVAL OF HARMFUL SUBSTANCES
GB
Mobile System (Top Unit)
(Pos. 130)

10
Overview Panel-PC FS112
REMOVAL OF HARMFUL SUBSTANCES
GB
Panel-PC
(Pos. 120)
Rear view

11
Overview Camera FS111
REMOVAL OF HARMFUL SUBSTANCES
GB
Camera
(Pos. 110)

12
Disassembly Stand
REMOVAL OF HARMFUL SUBSTANCES
GB
Power adapter FS110501
(Pos. 151)
Unscrew (screws are marked red).
DISASSEMBLY

13
Disassembly Stand
REMOVAL OF HARMFUL SUBSTANCES
GB
Unscrew und remove metal plate (Do not pull the cord!).
Turn over Stand and unscrew from the inside.
Stand
(from below)
Again turn over Stand and lift up plastic plate, move clips to
the side and remove plug.
Power adapter and cable can be remove from Stand.
Stand
(from above)
Stand
(from below)
PlugPlastic plate Clip

14
Disassembly Foot Switch FS113
REMOVAL OF HARMFUL SUBSTANCES
GB
The Foot Switch is one unit and can not be opened (glued).
Therefore the whole device has to be put into recycling.
Foot switch FS113
(Pos. 140)

15
Disassembly Mobile System FS110
REMOVAL OF HARMFUL SUBSTANCES
GB
Remove the top part by pressing
the buttons on the side.
Rermove the middle part by moving the
latches inside of the rod to the left.
Buttons

16
Disassembly Mobile System FS110
REMOVAL OF HARMFUL SUBSTANCES
GB
Unscrew to remove cable holder.
To remove the Vesa interface unscrew the four srews and remove the cover plate.
Again remove the four screws and the metal plate.
Unscrew the nut and remove the cable.

17
Disassembly Panel-PC FS112
REMOVAL OF HARMFUL SUBSTANCES
GB
Panel-PC FS112
(rear view)
USB-Keys
Plastic cover
If necessary remove remaining USB-keys.
Unscrew the bottom two screws and remove plastic cover.

18
Disassembly Panel-PC FS112
REMOVAL OF HARMFUL SUBSTANCES
GB
Unscrew the connector from the screen.
Remove cable holder and detach the cable.

19
Disassembly Panel-PC FS112
REMOVAL OF HARMFUL SUBSTANCES
GB
Remove screws.
Vesa interface can be detached.
Vesa interface

20
Disassembly Panel-PC FS112
REMOVAL OF HARMFUL SUBSTANCES
GB
Unscrew and remove the plastic cover.
Remove the screws and lift o the battery housing. Furthermore you can remove the metal backplane of the Panel-PC.
Hard drive
Circuit board
FS112503
(Pos. 123)
Battery housing
Circuit board
FS112500
(Pos. 124)

21
Disassembly Panel-PC FS112
REMOVAL OF HARMFUL SUBSTANCES
GB
Unplug the battery and remove it.
The hard drive can be removed and disposed of considering the laws governing data protection and data security.
Unscrew and remove PCB.
Battery plug
Battery
FS112530
(Pos. 121)