Backyard Creations FRN-913040 Installation guide

3 PC Rocking Bistro Set
Assembly & Care Instructions
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
SKU #: 272 1917
Model #: FRN-913040
ATLeisure, LLC
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
Email: customerser[email protected] or visit our website at www.atleisure.com
DO NOT RETURN TO STORE
2021 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China
The schematics in this manual are for assembly and operation illustration only.
They may differ from the actual appearance.
For assistance with assembly, parts, or customer service, please contact:

2
E
Contents
Glass Table Package Contents ...................2
Preparation ...............................2
Hardware Contents ........................3
Assembly ...............................3-4
Rocking Chair Package Contents .................5
Preparation ...............................5
Hardware Contents ........................5
Assembly ...............................6-8
Warranty ...................................9
Care and Maintenance.........................9
Warnings and Cautions ........................9
Replacement Parts ..........................10
Glass Table Package Contents
Part Description Quantity
AGlass Table Top 1
BLeg 4
C Leg Brace 1
Preparation
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product.
Before assembling make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Contact our customer service representative for
assembly assistance or questions toll free at 1-855-880-7205.
Estimated Assembly Time: 10 minutes
Tools required for Assembly: No tools required
A B C

3E
Hardware Contents
Part Description Quantity
AA Bolt (M6*42) 4
BB Washer 8
CC Screw Nut 4
DD Hex Key 1
EE Wrench 1
AA BB CC DD EE
Assembly
Step 1: Be careful to place the glass table top (A) upside down on a soft, flat
surface. Insert the end of table legs (B) into the plastic hole of the table top.

4
E
Assembly (continued)
Step 2: Align the leg brace (C) holes with the corresponding table leg (B)
holes. Place a washer (BB) over the holes and insert the bolts (AA) to attach the
frame from the outside of the table legs (B). Use the hex key (DD) to screw in
the bolts (AA) and the wrench (EE) to screw in the screw nut (CC). Do not over
tighten. Finally, use the hex key (DD) and the wrench (EE) to tighten all bolts
and nuts.
Step 3: Turn the table over . Place the table on a level surface. The table is
now ready for use.

5E
Rocking Chair Package Contents
Part Description Quantity
DRight Arm 2
ELeft Arm 2
F Seat & Back 2
G Front Connect Bar 2
H Bottom Leg Bar 2
DE F G H
Preparation
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product.
Before assembling make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Contact our customer service representative for
assembly assistance or questions toll free at 1-855-880-7205.
Estimated Assembly Time: 30 minutes
Tools required for Assembly: No tools required
Hardware Contents
Part Description Quantity
FF Short Bolt (M6*20) 12
GG Long Bolt (M6*30) 8
HH Washer 16
JJ Hex Key 1
FF GG HH JJ

6
E
Assembly
Step 1: Place the contents on a soft, flat surface. Align the bottom leg bar (H)
hole with the right and left arm (D and E) as shown in the image above. Use the
hex key (JJ) to tighten the short bolts (FF), being careful not to over tighten.
Step 2: Align the front connect bar (G) with the right and left arms (D and E).
Insert the short bolts (FF) through the washers (HH) into the holes. Use the hex
key (JJ) to tighten the bolts, being careful not to over tighten.
FF
HH FF
JJ
G
JJ
E
H
D

7E
Assembly (continued)
Step 3: Unfold the seat and back (F). Align the chair back with the holes on both
arms. Insert the long bolts (GG) through the washers (HH) and into the holes. Use
the hex key (JJ) to tighten the bolts, being careful not to over tighten.
Step 4: Lay the chair on its side. Align one side of the chair seat with the hole
of one arm (D or E). Insert the long bolt (GG) through the washers (HH) into the
hole. Use the hex key (JJ) to tighten the bolts, being careful not to over tighten.
F
JJ
JJ
GG
GG
HH
HH

8
E
Assembly (continued)
Step 5: Align the other side of the chair seat with the hole of the other arm (D
or E). Insert the long bolt (GG) through the washers (HH) into the hole. Finally,
use the hex key (JJ) to tighten the all bolts. Repeat assembly steps for the
second chair.
Step 6: Place the chairs and table on a level surface. The chairs and table are
now ready for use. Double check that all the bolts are fully tightened before
using.
JJ
GG
HH

9E
Warranty
ONE YEAR WARRANTY
This product is covered under a manufacturer’s one year warranty from date of
purchase against defects in materials and workmanship. This warranty does not
cover damage due to neglect, abuse or weather related damage. For full warranty
disclosure, email us at customerser[email protected], call toll free at 1-855-880-
7205 or send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312
NOT COVERED UNDER WARRANTY
This Warranty excludes the following: general frame rusting; glass breakage; acts of
nature (i.e. wind, fire, or freeze); damage caused by improper assembly, accident,
disaster, misuse, abuse, negligence and commercial use; discoloration or fading of
the finish or fabric as a result of exposure to the elements.
HOW TO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your in-
formation to send to ATLeisure at customerser[email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
Care and Maintenance
• Use mild soap and warm water to clean the frames.
• Rinse with clean water and dry thoroughly.
• Be sure to drain any water accumulated inside the frames. To thoroughly
drain frames, remove foot caps and tilt frames, if necessary, to remove all
water. Water allowed to accumulate inside the frames and then exposed to
sub-freezing temperatures can cause damage to frame tubing. Such damage is
not covered under warranty.
• Any rust spots should be lightly sanded and treated with rust inhibitor and
followed with an application of touch-up paint (not included).
Warnings and Cautions
DANGER: Keep children out of the assembly area during
assembly.
WARNING: Do not stand on table or chairs. Do not sit on
table.
CAUTION: Use table and chair on at ground only.
CAUTION: Excessive rocking motion could cause tipping
or injury.
IMPORTANT: Check the tightness of bolts at least every 90 days.

10
E
Replacement Parts
For replacement parts, call our customer service department at 1-855-880-7205,
8:00am-5:00pm., EST, Monday-Friday.
Part Description Quantity Part Number
B Table Leg 4 FRN-913040T-B
C Table Leg Brace 1 FRN-913040T-C
KIT Hardware Kit (table) 1 FRN-913040T-KIT
DRight Arm 2 FRN-913040C-AA
ELeft Arm 2 FRN-913040C-BB
F Seat & Back 2 FRN-913040C-CC
G Front Connect Bar 2 FRN-913040C-DD
H Bottom Leg Bar 2 FRN-913040C-EE
KIT Hardware Kit (chair) 1 FRN-913040C-KIT
B C
Hardware Kit (table)
Hardware Kit (chair)
DE F G H

ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
2021 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China