Backyard Creations Marquette MAR-3PC-SET User manual

1of12
Owner’s Manual
Marquette
3-Piece Wicker Reclining Set
Model Number: MAR-3PC-SET
SKU Number: 272-1861

2of12
Parts List
Marquette Reclining Chair (2)
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
A
Right Arm
2
I
Left Recliner
Extension
2
B
Left Arm
2
J
Recliner
Extension
Support Bar
2
C
Back Frame
2
K
M8 x 40mm Hex
Bolt
8
D
Seat Frame
2
L
M6 x 35 mm
Bolt
8
E
Leg Rest Frame
2
M
M6 x 32 mm
Bolt
16
F
Footrest Frame
2
N
M6 x 15 mm Bolt
20
G
Seat Support
Frame
2
O
Large Plastic
Spacer
4
H
Right Recliner
Extension
2
P
M6 Steel Washer
52

3of12
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
Q
M8 Steel Washer
8
W
M6 Bolt Cap
8
R
Small Plastic
Spacer
4
X
M6 Nut Cap
4
S
M6 Nut
20
Y
M8 Bolt Cap
8
T
Seat/Back
Cushion
2
Z
Allen Wrench
2
U
Leg Rest
Cushion
2
AA
M6 Open
Wrench
2
V
Footrest
Cushion
2
BB
M8 Open
Wrench
2

4of12
Assembly Instructions
Marquette Reclining Chair
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫Before beginning to assemble the product, remove all protective materials, hardware kit(s), and
identify all parts packed in the carton are present. (Note: If any part is missing or damaged, do not
attempt to assemble). Contact InSide Out Customer Support Team. See page 12.
⚫Two people are required to assemble heavy items.
⚫Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1: Recliner Extension Assembly
CAUTION: When opening and closing the extensions make sure to keep
your fingers clear from all moving parts to prevent injury.
Step 1.1: Attach Right Recliner Extension (H) to Seat Support Frame (G) using Bolts (L), Washers (P) and
Nut (S). Repeat for Left Recliner Extensions (I). See Figure 1A. Note: Do not tighten bolts until
end of Step 1.4.
Figure 1A

5of12
Step 1.2: Attach Recliner Extension Support Bar (J) to Right Recliner Extension (H) and Left Recliner
Extension (I) using Bolt (M) and Large Plastic Spacers (O). See Figure 1B.
Figure 1B
Step 1.3: Attach the Leg Rest Frame (E) to the Right Recliner Extension (H) and Left Recliner Extension
(I) using Bolts (N) and Washers (P). See Figure 1C.
Note: The Recliner Extension images in Figure 1C and Figure 1D are upside down to show
assembly.
Figure 1C

6of12
Step 1.4: Attach the Footrest Frame (F) to the Right Recliner Extension (H) and Left Recliner Extension (I)
using Bolts (N) and Washers (P). See Figure 1D. Tighten all bolts.
Figure 1D
Step 2: Reclining Chair Assembly
Step 2.1: Attach the Front and Back of Right Recliner Extension (H) to the inside bottom of Seat Frame (D)
using Bolts (M), Washers (P), and Nuts (S). Repeat for Front and Back of Left Recliner Extension
(I) See Figure 2A. Tighten bolts.
Figure 2A

7of12
Step 2.2:Attach Right Arm (A) and Left Arm (B) to Seat Support Frame (G) using Hex Bolts (K) and
Washers (Q). See Figure 2B. Tighten bolts.
Figure 2B
Step 2.3:Attach the Back Frame (C) to the Seat Frame (D) using Bolt (M), Washer (P), Small Plastic Spacer
(R), then Washer (P) and Nut (S) for the “Top Hole” only. Repeat opposite side of Back Frame (C)
“Top Hole” only.
Attach “Bottom Hole” of Back Frame (C) to “Bottom Hole” of the Seat Frame (D) using Bolt (N)
and Washer (P). See Figure 2C. Tighten Bolts.
Figure 2C

8of12
Step 3: Attach Bolt Caps (W, Y) and Nut Caps (X). See Figure 3A.
Figure 3A
Step 4: Attach Seat/Back Cushion (T), Leg Rest Cushion (U) and Footrest Cushion (V) with Velcro
straps. See Figure 4A.
Figure 4A
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/

9of12
Parts List
Marquette Side Table
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
A
Tabletop
1
G
M6 x 32 mm
Bolt
16
B
Legs
2
H
M6 x 20 mm
Bolt
4
C
Legs
2
I
M6 Steel Washer
20
D
Wicker Side
Panel
2
J
M6 Bolt Cap
20
E
Wicker Side
Panel
2
K
Allen Wrench
1
F
Umbrella Hole
Cover
1

10 of12
Assembly Instructions
Marquette Side Table
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫Before beginning to assemble the product, remove all protective materials, hardware kit(s), and
identify all parts packed in the carton are present. (Note: If any part is missing or damaged, do not
attempt to assemble). Contact InSide Out Customer Support Team. See page 12.
⚫Two people are required to assemble heavy items.
⚫Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1: Leg Assembly
Step 1.1: Place Tabletop (A) upside down on soft, non-abrasive surface.
Step 1.2: Attach Legs (B) to opposite corners using Bolts (H) and Washers (I). See Fig. 1A
Step 1.3: Repeat for Legs (C). See Fig 1A
Note: Do not tighten bolts until after step 2.
Figure 1A

11 of12
Step 2: Side Panel Assembly
Step 2.1: Attach Wicker Side Panels (D) to opposite sides using Bolts (G) and Washers (I). See Fig 2A.
Note: Hole alignment for wicker Side Panels (D & E) is different.
Step 2.2:Repeat for Wicker Side Panels (E). See Fig 2A.
Step 2.3:Tighten all bolts for Legs (B & C) and Wicker Side Panels (D & E).
Step 2.4:Attach all Bolt Caps (J).
Figure 2A
Step 3: Carefully turn the table over and insert Umbrella Hole Cover (F). See Fig 3A.
Figure 3A
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/

12 of12
Care & Maintenance
Maintain your outdoor furniture by using furniture covers or storing out of the elements when not in use.
Frame: Clean frames with a mild soap and warm water. Do not use abrasive materials, cleaners or bleach. Rinse
with clean water and dry thoroughly. Always clean, drain and dry thoroughly before storing for the
winter.
Tabletop: Clean the tabletop with a soft, clean white cloth or sponge. Never use scouring creams, abrasive cleaners,
acid or petroleum-based products. Wash with warm water and dry thoroughly after cleaning to prevent
buildup of any residue from minerals that might be present in your water, even with softened water.
Fabric: Cushions they may be cleaned by hand with a mild solution of soap and water. Rinse cushions
thoroughly, stand on end and allow to drip dry. Do not machine wash or tumble dry, as cushions may
shrink. Do not use bleach or solvents on fabrics.
Resin Wicker:Clean the resin wicker with a clean white cloth or sponge. Never use scouring creams, abrasive cleaners,
acid or petroleum-based products. Wash with warm water and dry thoroughly after cleaning to prevent
buildup of any residue from minerals that might be present in your water, even with softened water.
Warranty
You must retain the original receipt to obtain warranty service.
What is covered?
Frame: Frame is warranted against rusting for 1-year.
Finish: Frame and tabletop finish is warranted against peeling, cracking or blistering for 1-year if the product has not
been scratched or abraded.
Fabric: Cushions are covered by a 1-year warranty against manufacturing defects.
Wicker: Resin wicker is warranted against separation and tearing for 1-year.
What is not covered?
EXCLUSIONS: Furniture used for commercial, contract, or other non-residential purposes, or items damaged due to
acts of nature, vandalism, misuse, or improper assembly are not covered. Discoloration or fading of the finish or resin
wicker as a result of chemicals or spills, pool water chemicals or salt water is not covered. Mildew of fabric is not covered.
Corrosion and rusting of frames resulting from scratches are not covered. If within the stated warranty period this
product is found to be defective in material or workmanship, the purchaser must contact the manufacturer’s customer
service department. The manufacturer, at its option, will repair or replace the defective parts. Proof of purchase (dated
register receipt) is required for warranty claims. It remains the customer’s responsibility to pay for freight and packing
charges to and from the service center. Warranty is to the original purchaser and is non-transferable. Any replacement
of warranted items will be in the original style and color, or similar style and color if the original is unavailable or has
been discontinued.
Questions, problems, missing or damaged part? Before returning to the store call or email our Customer
Service.
Customer Service Contact Information:
Hours: Monday - Friday 8:00 a.m. - 5:00 p.m. Central Time (CT)
Phone: [phone]
Email: [e-mail]