Backyard Creations CAL-5PC-SG User manual

1of12
Owner’s Manual
Callaway 5-Piece Seating Group
Model Number: CAL-5PC-SG
SKU Number: 272-2194

2of12
Parts List – Callaway Chair (2)
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
A
Left Arm
2
G
M6 Steel Washer
16
B
Right Arm
2
H
M6 Bolt Cap
16
C
Back
2
I
Allen Wrench
1
D
Seat
2
J
Back Cushion
2
E
M6 x 40mm Bolt
8
K
Seat Cushion
2
F
M6 x 45mm Bolt
8

3of12
Assembly Instructions
Callaway Chair (2)
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton are present. (Note: If any part is missing or damaged, do not attempt to
assemble). Contact InSide Out Customer Support. See page 12.
⚫Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
⚫Two people are required to assemble heavy items.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1: Attach the Right Arm (B) to Seat (D) using Bolts (E) and Washers (G). See Figure 1.
Repeat for Left Arm (A). Do not tighten bolts until Step 2 is completed.
Figure 1

4of12
Step 2: Attach the Back (C) to the Right Arm (B) using Bolts (F) and Washers (G). Repeat for Left Arm (A).
Tighten All Bolts. Attach Bolt Caps (H) to Bolts (E & F). See Figure 2.
Figure 2

5of12
Step 3: Place the Seat and Back Cushions (K & J) on the assembled chair. See Figure 3 and Figure 4. Repeat
Steps 1 to 3 for the second chair.
Figure 3 Figure 4
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/

6of12
Parts List – Callaway Ottoman (2)
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
A
Ottoman Leg
4
E
M6 Bolt Cap
8
B
Seat
2
F
Allen Wrench
1
C
M6 x 40mm Bolt
8
G
Cushion
2
D
M6 Steel Washer
8

7of12
Assembly Instructions
Callaway Ottoman (2)
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton are present. (Note: If any part is missing or damaged, do not attempt to
assemble). Contact InSide Out Customer Support. See page 12.
⚫Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
⚫Two people are required to assemble heavy items.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1: Attach two Ottoman Legs (A) to the Seat (B) using Bolts (C) and Washers (D). Tighten All Bolts.
Add Bolt Caps (E) to all Bolts (C). Repeat for second ottoman. See Figure 1.
Figure 1

8of12
Step 2: Turn Ottoman to upright position and place the Cushion (G) on the Ottoman. See Figure 2 and
Figure 3.
Figure 2 Figure 3
Note: Please see our video for additional assembly assistance:
https://insideout.store/video-assembly-instructions/

9of12
Parts List – Callaway Side Table
Letter
Illustration
Description
Qty.
Letter
Illustration
Description
Qty.
A
Tabletop
1
E
M6 x 20mm Bolt
4
B
Table Support
Frame
1
F
M6 Steel Washer
12
C
Table Leg
4
G
M6 Bolt Cap
12
D
M6 x 15mm Bolt
8
H
Allen Wrench
1

10 of12
Assembly Instructions
Callaway Side Table
Note: For video instructions please visit:
https://insideout.store/video-assembly-instructions/
Important:
⚫Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫Before assembling the product, remove all protective materials, hardware kit(s), and identify all
parts packed in the carton are present. (Note: If any part is missing or damaged, do not attempt to
assemble). Contact InSide Out Customer Support. See page 12.
⚫Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
⚫Two people are required to assemble heavy items.
WARNING: DO NOT TIGHTEN BOLTS UNTIL NOTED AFTER EACH STEP!
Step 1: Attach the Table Support Frame (B) to the Tabletop (A) using Bolts (E) and Washers (F). Tighten
Bolts. Attach Bolt Caps (G). See Figure 1.
Figure 1