Backyard Creations L-BC217PST User manual

80 QT Rolling SS Cooler
Model: L-BC217PST
SKU: 2720855
Assembly Instructions
Congratulations on your purchase of our SUNJOY 80 QT Rolling SS Cooler. Our clear, easy to follow,
step-by-step instructions will guide you through the assembly process from start to finish.
WARNING:
●Keep all children and pets away from assembly area. Children and pets should be supervised when they are
in the area of the Cooler construction.
●Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
●Protect parts during assembly by laying them on a non-abrasive surface such as blankets or cardboard.
● Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
● Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
● Assemble on level ground.
CARE AND MAINTENANCE:
Before using, clean the cooler completely with a soft dry towel, take off the lid and put drinks and ice into the
cooler.
Drain away all the water in the cooler, clean and dry the cooler completely with a soft towel after use.
Indoor storage preferred while not in use.
Made In China
Production Number：

No. Parts Qty No. Parts Qty
A Knob 2 J Caster with brake 2
B Lid 1 K Drain Plug(pre-assembled) 1
C Body 1 AA

Hex Bolt M6*12 ( packed in a hardware
pack, in cap catcher E ) 8
D Handle 2 BB Plus Screw M6*12 ( preassembled ) 10
E Bottle Opener 1 CC Plus Screw M5*25 2
F Cap Catcher 1 DD Washer M5 2
G Leg 4 EE Wrench M12 ( packed in a hardware pack,
in cap catcher E ) 1
H Bottom Shelf 1 FF Wrench M6 ( packed in a hardware
pack, in cap catcher E ) 1
I
Ca
ster without brake
2
Tools required: screw driver (not include).
ASSEMBLY INSTRUCTIONS:
Parts List
Step 1: Fix Caster (I &J) to the Bottom Shelf (H) and
Leg (G) by Wrench (EE)Please do not tighten the
bolts here.
Step 2: Place the Body (C) upside down，
connect Leg (G) to Body (C) with Bolt (AA) by
Wrench (FF). Tighten all bolts.
P40107A23000
Part# Part#
P40402A23000
P40003A23000
P40203A23000
P40108A23000
P40109A23000
P40303A23000
P40902A23000
P90306B01002
P90306A01002
P40110A23000
H21012C11
H09012C12
H09025B12
H12001B12
H00001F12
H00002C12
Made In China
Production Number：

Please do not return this product to the store. For technical assistance on assembly or
replacement parts call Sunjoy Industries at 1(866) 578-6569 or
Email [e-mail] or visit www.sunjoyonline.com to place your order or fax
your parts replacement order form together with your purchase receipt to 1 [phone]
for assistance.
Step 3: Remove BB from the Body first , then
connect the Handle (D) to the Body (C) by
Screw (BB).
Step 4: Turn the assembled piece upright. Attach
bottle opener (E) to body (C) by screw (BB) as Fig.4.1.
Then hang cap catcher (F) to body (C) as Fig.4.2.
Step 5: Remove the Washer (DD) and Screw
(CC) from the bottom side of Lid (B) first, then
attach knob (A) to lid (B) by Screw (CC) and
Washer (DD). Then place the lid on the body.
Step 6: Please screw down the water gate (K) before use the cooler, and check if the rubber washer is inside
the lid of water gate before use, as the lack of rubber washer can cause leaking.
Your cooler cart is now ready for use.
Made In China
Production Number：