Backyard Creations 273-0836 User manual

Made in Brazil
SKU # 273-0836
Wood Bench
Questions or missing parts please call
1-877 781 8991 from 9am to 5pm EST.
Or e-mail: [email protected]

Bench is guaranteed for a period of one year against any manufacturing defect that affects its suitability for use.
This applies to a normal condition of use and maintenance. This guarantee does not apply to faults or imperfections resulting
from the passage of time or normal wear and tear.
The word “defects” is dened as imperfection that impairs the use of the products. Defects resulting from misuse, abuse or
customer negligence will void this warranty.
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
This Warranty does not cover commercial use, hardware, act of nature, freezing and abusive use. Circumstances not covered by
this guarantee include, but are not limited to, the fading or change in shade of colors, change in wood texture, scratches
resulting from use, etc. If the product is defective within the term of this warranty, South America Furniture, LLC will repair
defective parts at no cost to the purchaser. Shipping charges are not covered and are the responsibility of the purchaser.
DANGER: Please keep children out of the assembly area
during assembly.
WARNING: Do not stand on the bench.
CAUTION: Use the bench on flat ground only.
You may contact our customer service department with any questions by phone at [phone] or email us at
[email protected]
2
Wood is a natural product and requires special care when exposed to the weather. See some important information and tips:
· Contractions and expansions can occur due to the effects of the sun and rain.
· Alterations in the finish and texture, including splits, are not a defect but characteristic of a natural product.
· Screw may loosen with use and should be checked and re-tightened.
· If exposed to the weather (sun, rain, wind, etc) the furniture will need periodic maintenance.
· keeping it always beautiful and resistant, is rather easy. Just follow these tips:To enjoy your furniture for much longer,
· Wash your furniture with water, with or without the aid of mild soap.
· Once it is completely dry, evaluate the surface. If necessary, lightly sand the wood with a fine sandpaper.
· Apply linseed or teak oil.
· Clean surface with a foam pad (optional).
· This is recommended after the first six months of use. After this first application, repeat the process annually.
· If left untreated the furniture will weather to a silvery gray finish over time.
· Rain can cause the transfer of pigmentation from the wood for the floor in the first days of use. These spots will disappear
naturally after a few days or just washing the floor.
· Storage During Winter: When storing this product, do not put in rooms that are centrally heated, as this will cause the wood to
dry out and possibly shrink and crack.
1 Year Limited Warranty.........................................................

Allen Key 4mm
Bolt (Ø7x80mm)
Bolt (Ø4x40mm)
Wood Dowel (Ø10x40mm)
1
6
4
6
1
2
3
4
Allen Key Phillips Screwdriver
1
4
2
3
TOOLS REQUIRED (included) TOOLS REQUIRED (not included)

Seat Panel
Backrest Panel
Leg
Front Batten
1
1
2
1
A
B
C
D
A
C
R
L
D
B
*Note: DO NOT COMPLETELY TIGHTEN
ANY BOLTS AND SCREWS UNTIL THE
UNIT IS FULLY ASSEMBLED AND SET
ON A LEVEL SURFACE.

1
3
2
4
Placing the wood dowels
Attaching the Seat – Part 1 of 2
Attaching the Legs to the Backrest
and Front Batten
Attaching the Seat – Part 2 of 2
Place the wooden dowels (4) in the holes in the backrest
(B) and front batten (D).
Fit the seat (A) in between the legs (C) positioning it on
top of the side rails, under the armrest.
Attach the Legs (C) to the Backrest (B) and Front Batten (D)
with Bolts (2) using the included Allen Key (1).
Fix the seat (A) to the legs (C) with Bolts (3) using a Phillips
Screwdriver (not included).
B
B
B
3
3
3
3
3
D
D
D
C
C
C
C
A
A
4
4
2
2
2
22
2
4
4
4
4
Notes: Do not completely tighten any
bolts and screws until the unit is fully
assembled and set on a level surface.