Bandai Namco DC HEROES vs. VILLIANS AIR HOCKEY User manual

DC HEROES vs.
VILLIANS AIR HOCKEY
Air Hockey Table Owner’s Manual.
Assembly, operation and care instructions.

Contents
Foreword ....................................................................................................................................... 2
Product Specifications................................................................................................................... 2
Before Assembling........................................................................................................................ 3
Tools required for Assembling*.................................................................................................... 3
Product Parts ................................................................................................................................. 4
1. For Legs ............................................................................................................................ 4
2. For Protection Acrylic....................................................................................................... 4
3. For Player.......................................................................................................................... 5
Assembly Procedures.................................................................................................................... 6
Safety Instructions for Use and Play........................................................................................... 10
Hardware and Software Configuration ....................................................................................... 11
Hardware Descriptions............................................................................................................ 11
Hardware Specifications ......................................................................................................... 12
Software Specifications........................................................................................................... 13
Menu Diagram: ....................................................................................................................... 14
Parts............................................................................................................................................. 15
Cabinet parts............................................................................................................................ 15
Cash Box and Tickets Parts (Arcade Version Only)............................................................... 16
Electronics............................................................................................................................... 17
Decal Prints............................................................................................................................. 18
Consumable Parts.................................................................................................................... 19

2
Foreword
We would like to thank you very much for purchasing the DC COMICS Air Hockey
from Bandai Namco Amusement America Inc.
For your own safety, please read through this instruction manual that we have prepared
for you thoroughly, and take precautions when using the product. We hope that you will become
accustomed to the product quickly.

Product Specifications
Electrical Power (MANUAL SELECT)
Domestic 120 VAC @ 60 Hz, 5 amps
International 240 VAC @ 50 Hz, 2.5 amps
Temperature
32° to 100° Fahrenheit
Humidity
Must not exceed 95% relative humidity
Assembled “AIR GAME HEROES vs VILLAINS”
Dimensions Width – 48,5”
Depth – 88”
Height – 37”
Weight Assembled ~360 lbs.

Before Assembling
WARNING
THIS TABLE WEIGHS 360 POUNDS
1. Please make sure you have at least 4 strong adults to assist with assembly and
installation*.
*Note: Bandai Namco Amusement America accepts no responsibility for any injury that
may result from the assembly, installation or moving of this product.
2. Inspect to make sure all the parts are included and not damaged.
3. Prior to assembly, you must ensure there is sufficient space for placing or shifting
this product.
Tools required for Assembling*
•DC Comics Air Hockey Manual
•Scissors
•Hex Allen Key - 4mm (located inside the bag manual)
*Note: Prepare the above specified tools. Be careful not to damage the product while using
these tools

Product Parts
1. For Legs
4 Dc Comics Plastic Legs
4 Adjustable Leg Levelers
24 Roundhead screws M6 x 35mm
24 Split Lock washers M6
24 Flat washers M6
2. For Protection Acrylic
2 metal acrylic center holder
4 side protection acrylic
1 center acrylic
16 Roundhead screws M6 x 35mm

3. For Player
2 doors keys
1 AC Power cord
2 pucks
2 mallets

Assembly Procedures
1. Use scissors or a knife to cut* through the packing tape.
*Note: Do not cut too deep or you will damage the unit.
2. Open the carton, make sure the wooden side of the Air Hockey table is facing up.
3. Use Hex Allen Key - 4mm to unscrew the 10 screws on the panel with the sticker “Parts
Inside’’ on it. Once the panel is opened, please take out the parts* indicated on page 5
and 6.
*Note: Do not remove Air Blower
Panel marked
“Parts Inside”

4. Take out the 4 Air Hockey table plastic legs and screw the adjustable leg levelers into
the base of the legs.
5. Place the legs on the bottom surface of the table. Ensure alignment and then attach with
roundhead screws M6 x 35mm and split lock washer M6 and flat washer M6

6. Plug in the AC Power Cord
7. Ensure all legs are tightly attached then flip the table 90 degrees keeping the cardboard
top on to prevent scratching. This action requires 4 people. Please make sure you have
at least 4 strong adults to assist with assembly and installation. Flip it another 90
degrees to place the legs on the ground.
Finished Position
AC Power
ON / OFF
Fuse
Plug

Using 2 steel locker central protection, assemble the central protection acrylic. Ensure alignment
and then attach with 4 roundhead screws M6 x 35mm.
8. Assemble the side protection acrylic. Ensure alignment and then attach with 3
roundhead screws 6 x 35mm, each piece.

Safety Instructions for Use and Play
Risk of Electric Shock
•Hazardous voltage, which can cause electrical shock, exists inside the equipment. Only
qualified personnel should work inside the equipment.
Playing Warnings
•Do not hit the puck with the mallet when the puck is not level and flat.
•Spectators should not stand by the side of the table. This may cause injury.
•Hold the mallet by the handle and not the base or the puck may hit fingers.
•This game features flashing lights, which may not be suitable for photosensitive
epilepsy.

Hardware and Software Configuration
First, ensure the power is off. Open the door with a key. Hold the panel's handle and
pull it out until half of the power panel is exposed.
Hardware Descriptions
Note: Do not touch
open terminals or
exposed wires while
the game is on. Risk
of electric shock.

Hardware Specifications
Power Supply
Provides power to all internal components, such as the motherboard, coin mechanism,
motor. etc. The +12 VDC and +24VDC are separated to ensure no interference to components
when one has an insufficient supply or an unstable supply of power.
Note: +24 VDC is on the left +12 VDC is on the right
Motor PCB
Motor PCB switches the blower motor on and off. When the green LED is on, the
motor is on! Main PCB control the motor PCB.

Main PCB
Controls the operation of all internal components. Malfunctions or errors with any of
the components can be diagnosed by looking at the DISPLAY indicators on the main PCB.
Software Specifications
Short Menu:
i. Press up to set VOLUME IN GAME, adjust the volume using up and down then press
change for complete.
ii. Press down to set VOLUME DEMO, adjust the volume using up and down then press
change for complete.
Complete Menu:
Press change to enter menu, up and down to choose options, cancel to return.
LED is lit if
SD Card is
reading
LED is lit if
main PCB is
working
Display
&
SD CARD
MENU
4 push
buttons
RESET
Restart the
Main PCB

Menu Diagram:

Parts
Cabinet parts
Ref
Part Description
Part#
1
Protection Acrylic Set (Blue) AH95-19062-00
Protection Acrylic Center (Blue) AH95-19062-01
Protection Acrylic Left (Blue) AH95-19062-02
Protection Acrylic Right (Blue) AH95-19062-03
2
Side Blue Clear Rail Trim AH90-19102-01
3
Side Aluminum Rail (Blue) AH10-19063-00
4
Plastic Corner (Blue) AH90-19064-00
5
Corner Finishing (Blue) AH90-19065-00
6
End Blue Clear Rail Trim AH90-19103-01
7
End Aluminum Rail
AH10-19066-00
8
Acrylic Play Field 10MM “Heroes” AH90-19067-00
9
Leg “Heroes” AH10-19068-00
10
Leg Leveler
AH20-31-000-095-00
11
Protection Bracket Set
AH05-68-000-259-00
Protection Bracket Left/Right
AH05-68-000-259-99
Protection Bracket Center
AH05-68-000-259-98
12
Coin Door Puck Dispenser (Blue) AH10-19069-00
13
Lock
AH26-64-700-006-00

Cash Box and Tickets Parts (Arcade Version Only)
Ref
Part Description
Part#
1
Coin Acceptor
AH83-42-400-042-00
2
Coin Door Assembly (Blue) AH05-19060-00
3
Ticket Door Assembly
AH05-19061-00
4
TL-002IV Ticket Dispenser
AH82-42-400-106-00

Electronics
Ref
Part Description
Part#
1
Line Filter 125/250 VCA 6A
AH78-42-500-007-00
2
Speaker 4” 40W 4 OHMS
AH54-40-000-032-00
3
Solenoid Matic 12V HST-100.1 12VCC-100%
AH36-42-400-107-00
4
Optical Goal Sensor
AH79-68-000-255-00
5
Power Cord 6 feet
AH51-40-200-104-06
6
Display PCB “Air Rev. 1”
AH15-41-700-062-00
7
Blower
AH58-40-000-009-00
8
Rail Sensor Chip “Piezoelectric” 27MM 30V
AH75-40-600-003-00
9
SD Card with Software “DCHVV” AH15-43-000-036-02
10
Power Supply 24V 150W “Meanwell LRS-350-24”
VG88-16287-00
11
Power Supply 12V 150W “Meanwell RS-150-12”
VG88-14591-00
12
Main PCB “Geany Rev. 5.1”
AH15-43-000-035-00
13
Motor PCB “Motor Rev.1”
AH15-41-700-064-00
14
Complete Harness
AH50-40-100-110-00

Decal Prints
Ref
Part Description
Part#
1
Decal Side 1 (Batman/Wonder Woman) AH40-19070-00
Decal Side 2 (Harley/Green Lantern)AH40-19071-00
Hero End Decal AH40-19072-00
Villain End Decal AH40-19703-00
2
Security Decal Set
AH40-68-000-261-00