Bandai Namco Time Crisis 5 User manual

●●To●ensure●safe●operation●of●the●products,●be●sure●to●read●this●Operation●Manual●before●use.
●●Keep●this●operation●manual,●along●with●the●projector●operation●manual●in●a●safe●place●where●is●
can●be●quickly●accessed●whenever●needed.
Time●Crisis●5●(US●specications)
The●specications●of●the●machine●and●the●contents●of●this●operation●manual●are●
subject●to●change●without●prior●notice●due●to●product●improvements.


OPERATION●MANUAL
The●actual●product●may●di󱐯er●slightly●from●the●illustrations●in●this●manual.

 
OPERATION●MANUAL First●Edition
2737003100
WARNING

Introduction
Thank you very much for purchasing Time Crisis 5 (referred to as "the machine" in this Operation Manual).
This Operation Manual describes:
•How to safely install, operate, move, transport, maintain and dispose of the machine.
•How to make full use of the machine's functions and operate it correctly.
•How to ensure the safety of players and bystanders.
Contact for machine and machine repair inquiries
•For inquiries regarding the machine or machine repairs, contact your distributor.
(Authorized in September 2014)
BANDAI NAMCO Games manages and identifies the chemical substances contained in our
products through our green procurement standard. The machine described in this manual is
environmentally friendly and designed to reduce power usage (through the use of power-saving
materials), save resources (cabinets designed to increase transport efficiency and reduce
packaging materials), and be easily recycled (designed to be disassembled easily).
More information on can be found on our official website.

3
1
2
3
4
5
6
7
8A
8B
9
10
11
Safety Precautions Test Mode Troubleshooting
1. Safety Precautions– Be sure to read to ensure safe operation –
Instructions to the Owner
If you delegate the work of installing, moving, transporting, operating, maintaining or disposing of the machine
to other people, ensure that these people read the relevant sections of this Operation Manual carefully before
starting work, and observe the corresponding precautions.
1-1 Levels of Risk
The safety and property damage precautions on the machine labels and in this Operation Manual are
classified according to their risk level, as follows.
WARNING
: Failure to avoid these risks may result in serious injury or death
: Failure to avoid these risks may result in light injury or damage to other property
Notes about functionality that are not related to safety are indicated by the following symbol.
: Information about product functions or protection
1-2 Definition of "Technician"
This Operation Manual is designed for arcade personnel. However, the sections marked "Must be performed
by a technician" in the Table of Contents are written for technicians. These must be performed by technicians
only.
A technician is a person involved in the design, manufacture, inspection, maintenance or service at an
amusement device manufacturer, or a person involved routinely in the maintenance or management (such
as repair) of amusement devices who has specialist knowledge of electricity, electronics or mechanical
engineering equivalent to or higher than a technical high school graduate.

1. Safety Precautions – Be sure to read to ensure safe operation –
4
1-3 Critical Safety Precautions
●Should an abnormality occur, turn off the power switch immediately to stop operations. Then, be sure to
disconnect the power cord plug from the outlet.
Operating the machine while the abnormality persists may result in fire or accident.
●Dust accumulating on the power cord plug may result in fire. Inspect the plug regularly and remove any
dust.
●Fully insert the power cord plug into the outlet. Poor contact may generate heat and result in fire or
burns.
●Damage to the power cord may result in fire, electric shock or electrical leakage. Be sure to observe the
following.
• Keep the power cord away from heaters.
• Do not twist the power cord.
• Do not forcibly bend the power cord.
• Do not alter the power cord.
• Do not bundle the power cord.
• Do not pull the power cord. (Always unplug by holding the plug and not the power cord.)
• Do not place objects on the power cord.
• Do not allow the power cord to be caught between the machine and other devices or the wall.
• Do not do anything else that might damage the power cord.
●Do not expose the power cord and power cord plug to water. Doing so may result in electric shock or
electrical leakage.
●Do not touch the power cord plug with wet hands. Doing so may result in electric shock.
●The maximum current consumption of 9 A is the machine's power capacity. To prevent fire and electric
shock, use indoor wiring that conforms to these power supply specifications.
●Operate the machine using a power supply voltage in the range of 110 to 130 VAC. Using a voltage
outside this range may result in fire or electric shock. To ensure that the machine operates in optimum
conditions, try to maintain the power supply at 120 VAC.
●In order to ensure this machine is used safely, be sure to perform the pre-operation inspection (P-34 "7-4
Pre-operation Inspection") and service (P-84 "8B. Service") described in this Operation Manual.
Omitting these inspections or service may result in an accident.
●Use the consumables and service parts (including screws) that are specified by BANDAI NAMCO Games
Inc. To order parts, contact your distributor.
●Do not modify the machine without permission. Do not perform any operations that are not described in
this Operation Manual. Modifying the machine may create unforeseen hazards.
●The machine has been manufactured according to Japanese specifications and thus it does not comply
with standards used outside of Japan. It must only be used in Japan. Using it outside of Japan may lead
to unforeseen hazards.
●If you decide to transfer the ownership of this machine, be sure to provide this Operation Manual with
the machine.
WARNING

1. Safety Precautions – Be sure to read to ensure safe operation –
5
Safety Precautions Test Mode Troubleshooting
1
2
3
4
5
6
7
8A
8B
9
10
11
1-4 Machine Warning Labels
●The warning labels attached to the machine contain important information to ensure safety. Be sure to
observe the following.
• In order to ensure that the warning labels attached to the machine are always clearly visible, install
the machine in an appropriate location with ample illumination and keep the labels clean at all times.
Also make sure that the labels are not hidden by other machines or objects.
• Do not remove or alter the warning labels.
• If a warning label becomes excessively dirty or damaged, replace it with a new one. To order warning
labels, contact your distributor.
WARNING
Front
Caution sticker regarding hypersensitivity to light (F) (EXP)
Part No.: 461-823

1. Safety Precautions – Be sure to read to ensure safe operation –
6
Back
Warning sticker Service B (EXP)
Part No.: 461-539
Warning sticker Service B (EXP)
Part No.: 461-539

7
1
2
3
4
5
6
7
8A
8B
9
10
11
Table of Contents Test Mode Troubleshooting
Table of Contents
1. Safety Precautions – Be sure to read to ensure safe operation –................................................................................ 3
1-1 Levels of Risk.......................................................................................................................................................... 3
1-2 Definition of "Technician"........................................................................................................................................ 3
1-3 Critical Safety Precautions ...................................................................................................................................... 4
1-4 Machine Warning Labels ......................................................................................................................................... 5
2. Specifications............................................................................................................................................................... 10
3. Package Contents......................................................................................................................................................... 16
4. Overall Structure (Part Names).................................................................................................................................... 22
5. Delivery and Installation Conditions............................................................................................................................ 24
5-1 Installation Conditions ........................................................................................................................................... 24
5-1-1 Locations Where the Machine Should Not Be Installed............................................................................. 24
5-1-2 Play Zone when the Machine Is in Operation ........................................................................................... 25
5-2 Required Dimensions for the Delivery Route (Such as Doors and Corridors)........................................................... 26
6. Moving and Transportation .......................................................................................................................................... 27
6-1 Moving (Within the Same Floor)............................................................................................................................. 27
6-2 Transportation ....................................................................................................................................................... 28
6-2-1 Manual Transportation (Such as Carrying on Stairs)................................................................................. 28
6-2-2 Loading to and Unloading from a Vehicle................................................................................................. 30
6-2-3 Transportation Using a Vehicle................................................................................................................. 31
7. Operation ...................................................................................................................................................................... 32
7-1 People Who Should Not Play the Game.................................................................................................................. 32
7-2 Safety Precautions for Playing............................................................................................................................... 33
7-3 Explanation of Parts That Are Critical for Safety of Players and Bystanders ............................................................ 33
7-4 Pre-operation Inspection ....................................................................................................................................... 34
7-4-1 Safety Inspection (Before Power On) ....................................................................................................... 34
7-4-2 Safety Inspection (After Power On) .......................................................................................................... 35
7-4-3 Function Inspection (After Power On)....................................................................................................... 35
7-5 Playing the Game.................................................................................................................................................. 36
7-5-1 Outline of the Game ................................................................................................................................ 36
7-5-2 How to Operate the Gun Controller.......................................................................................................... 36
7-5-3 How to Operate the Pedal........................................................................................................................ 36
7-5-4 Game Rules ............................................................................................................................................ 36
7-5-5 Types and Features of Weapons .............................................................................................................. 37
7-5-6 Explanation of the Game System............................................................................................................. 38
7-5-7 Participation of a Player in the Middle of the Game, and Game Over........................................................ 38
7-6 Power Switch and Adjustment Switches................................................................................................................ 39
7-6-1 Turning the Power Switch ON.................................................................................................................. 39
7-6-2 Adjustment Switches .............................................................................................................................. 41
7-7 Test Mode ............................................................................................................................................................. 42
7-7-1 Description of the Main Menu Screen (MENU) ......................................................................................... 42
7-7-2 Game Cost Settings (COIN OPTIONS) ....................................................................................................... 44
7-7-3 Game Contents Settings (GAME OPTIONS)............................................................................................... 45
7-7-4 Gun Test.................................................................................................................................................. 46
7-7-5 Input/Output Test of Switches (I/O TEST).................................................................................................. 49

8
Table of Contents
7-7-6 Monitor Test............................................................................................................................................ 53
7-7-7 Sound Test.............................................................................................................................................. 54
7-7-8 Displaying Game Data (BOOKKEEPING).................................................................................................... 55
7-7-9 Other Options (OTHERS) .......................................................................................................................... 57
7-8 Maintenance Time................................................................................................................................................. 60
7-9 Cleaning ............................................................................................................................................................... 61
7-9-1 Cleaning the Gun Assembly..................................................................................................................... 61
7-9-2 Cleaning the Monitor Panel ..................................................................................................................... 61
7-9-3 Cleaning the Acrylic Part ......................................................................................................................... 62
8. Technician's Manual – Must be performed by a technician –.................................................................................... 63
8A. Installation and Assembly ......................................................................................................................................... 63
8A-1 Assembly Preparation ......................................................................................................................................... 63
8A-1-1 Number of Technicians and Work Time.................................................................................................. 63
8A-1-2 Workflow .............................................................................................................................................. 63
8A-1-3 Space Required during Installation........................................................................................................ 64
8A-1-4 Tools Required ...................................................................................................................................... 64
8A-2 Assembling the Front Assembly........................................................................................................................... 65
8A-3 Assembling the Gun Tower Assembly .................................................................................................................. 75
8A-4 Level Adjuster Adjustment................................................................................................................................... 77
8A-5 Inserting the USB Dongle .................................................................................................................................... 78
8A-6 Connecting the Power Cord and Ground .............................................................................................................. 79
8A-7 Post-Installation Checks...................................................................................................................................... 80
8A-8 Turning the Power Switch On .............................................................................................................................. 81
8A-9 Confirmation after Power On............................................................................................................................... 83
8A-10 Gun Assembly Adjustment................................................................................................................................. 83
8B. Service........................................................................................................................................................................ 84
8B-1 Inspection and Service........................................................................................................................................ 84
8B-1-1 Points for Inspection ............................................................................................................................. 84
8B-2 Troubleshooting .................................................................................................................................................. 85
8B-2-1 Overall.................................................................................................................................................. 85
8B-2-2 Monitor Tower (L) and (R) Assemblies.................................................................................................... 86
8B-2-3 Coin Box Assembly ............................................................................................................................... 87
8B-2-4 Signboard (L), (R), and (C) Assemblies ................................................................................................... 87
8B-2-5 Gun Tower (L) and (R) Assemblies ......................................................................................................... 88
8B-2-6 Gun Assembly....................................................................................................................................... 89
8B-2-7 Pedal assembly..................................................................................................................................... 90
8B-3 Error Displays ..................................................................................................................................................... 91
8B-4 Removing, Installing, and Replacing Each Part .................................................................................................... 92
8B-4-1 Monitor Tower (L) and (R) Assemblies.................................................................................................... 92
8B-4-2 Coin Box Assembly ............................................................................................................................. 112
8B-4-3 Signboard Assembly ........................................................................................................................... 113
8B-4-4 Gun Tower (L) and (R) Assemblies ....................................................................................................... 117
8B-4-5 Gun Assembly..................................................................................................................................... 122
8B-4-6 Pedal Assembly................................................................................................................................... 134
9. Disposal ...................................................................................................................................................................... 136
10. Parts List..................................................................................................................................................................... 138
10-1 Overall .............................................................................................................................................................. 138
10-2 Front Assembly ................................................................................................................................................. 140

9
Table of Contents
1
2
3
4
5
6
7
8A
8B
9
10
11
Table of Contents Test Mode Troubleshooting
10-3 Monitor Tower (L) Assembly .............................................................................................................................. 142
10-4 Monitor Tower (R) Assembly .............................................................................................................................. 144
10-5 ES3X Assembly ................................................................................................................................................. 146
10-6 Coin Box Assembly............................................................................................................................................ 148
10-7 Signboard Assembly.......................................................................................................................................... 152
10-8 Cord Box Assembly ........................................................................................................................................... 154
10-9 Gun Tower (L) Assembly .................................................................................................................................... 156
10-10 Gun Tower (R) Assembly.................................................................................................................................. 160
10-11 Gun Assembly ................................................................................................................................................. 164
10-12 Pedal Assembly............................................................................................................................................... 166
11. Wiring Diagram........................................................................................................................................................... 169

10
2. Specifications
(1) Rated power supply AC 120 ±10 V
(2) Rated power consumption 1080 W
(3) Maximum current consumption 9 A
(4) Coin box capacity Approximately 3000 coins.
(5) Display unit 55" LCD monitor x 2
(6) Dimensions
[1] When installed Width (W) 2,860 x Depth (D) 1,700 x Height (H) 2,280 [mm]
2860
2280
1700

2. Specifications
11
1
2
3
4
5
6
7
8A
8B
9
10
11
Specifications Test Mode Troubleshooting
[2] When disassembled
Monitor tower (L) assembly Width (W) 1,430 x Depth (D) 640 x Height (H) 1,890 [mm]
1430
1890
640
Monitor tower (R) assembly Width (W) 1,430 x Depth (D) 640 x Height (H) 1,890 [mm]
1430
1890
640

2. Specifications
12
Coin box assembly Width (W) 470 x Depth (D) 400 x Height (H) 750 [mm]
470
750
400
Signboard (L) assembly Width (W) 1,040 x Depth (D) 420 x Height (H) 320 [mm]
1040
320
420
Signboard (R) assembly Width (W) 1,040 x Depth (D) 420 x Height (H) 320 [mm]
1040
320
420

2. Specifications
13
1
2
3
4
5
6
7
8A
8B
9
10
11
Specifications Test Mode Troubleshooting
Signboard (C) assembly Width (W) 1,200 x Depth (D) 340 x Height (H) 340 [mm]
1200
340
250
395
340
Gun tower (L) assembly Width (W) 740 x Depth (D) 930 x Height (H) 950 [mm]
(When the gun is removed)
Width (W) 740 x Depth (D) 1,010 x Height (H) 1,050 [mm]
(When the gun is inserted)
950 (when the gun is removed)
1050 (when the gun is installed)
740 930
1010

2. Specifications
14
Gun tower (R) assembly Width (W) 740 x Depth (D) 930 x Height (H) 950 [mm]
(When the gun is removed)
Width (W) 740 x Depth (D) 1,010 x Height (H) 1,050 [mm]
(When the gun is inserted)
950 (when the gun is removed)
1050 (when the gun is installed)
740
930
1010
Pedal assembly Width (W) 390 x Depth (D) 190 x Height (H) 160 [mm]
390
160
190

2. Specifications
15
1
2
3
4
5
6
7
8A
8B
9
10
11
Specifications Test Mode Troubleshooting
(7) Weight
[1] When installed 550 kg
[2] When disassembled
Monitor tower (L) assembly 170 kg
Monitor tower (R) assembly 170 kg
Coin box assembly 40 kg
Signboard (L) assembly 18 kg
Signboard (R) assembly 18 kg
Signboard (C) assembly 16 kg
Gun tower (L) assembly 55 kg
Gun tower (R) assembly 55 kg
Pedal assembly 6 kg x 2

16
3. Package Contents
The following items (9 packages) are included when this machine is shipped.
●Make sure that all the items below are contained in the product packages.
●If any items are missing, contact your distributor.
Monitor tower (L) assembly (Package No. 1/8)
Weight: 170 kg
Width (W) 1,430 x Depth (D) 660 x Height (H) 1,890 [mm]
Monitor tower (L) assembly
No. Name Specifications Qty.
1 Monitor tower (L) assembly See illustration above 1
2 Service key 2

3. Package Contents
17
1
2
3
4
5
6
7
8A
8B
9
10
11
Package Contents Test Mode Troubleshooting
Monitor tower (R) assembly (Package No. 2/8)
Weight: 170 kg
Width (W) 1,430 x Depth (D) 660 x Height (H) 1,890 [mm]]
Monitor tower (R) assembly
No. Name Specifications Qty.
1 Monitor tower (R) assembly See illustration above 1
2 Service key 2
Coin box assembly (Package No. 3/8)
Weight: 40 kg
Width (W) 430 x Depth (D) 500 x Height (H) 840 [mm]
Coin box assembly
No. Name Specifications Qty.
1 Coin box assembly 1
2 Service key 2
3 Cashbox key 1

3. Package Contents
18
Signboard (L) assembly (Package No. 4/8)
Weight: 22 kg
Width (W) 1,120 x Depth (D) 520 x Height (H) 430 [mm]
Signboard (L) assembly
No. Name Specifications Qty.
1 Signboard (L) assembly 1
Signboard (R) assembly (Package No. 5/8)
Weight: 22 kg
Width (W) 1,120 x Depth (D) 520 x Height (H) 430 [mm]
Signboard (R) assembly
No. Name Specifications Qty.
1 Signboard (R) assembly 1

3. Package Contents
19
1
2
3
4
5
6
7
8A
8B
9
10
11
Package Contents Test Mode Troubleshooting
Signboard (C) assembly (Package No. 6/8)
Weight: 32 kg
Width (W) 1,280 x Depth (D) 480 x Height (H) 360 [mm]
Signboard (C) assembly
No. Name Specifications Qty.
1 Operation Manual (This manual) 1
2 Signboard (C) assembly 1
3 Pedal assembly 2
4 Tower joint A 2
5 Tower joint B 1
6 LAN cable 1
7 Price sticker (EXP) 1
8 Pedal joint (A) 2
9 Pedal joint (B) 2
10 Flange socket bolt (M6 x 12) 3
11 Torx bolt (black) (M5 x 12) 2
12 USB dongle 2
13 Coin door 1
14 Coin cover 1

3. Package Contents
20
Gun tower (L) assembly (Package No. 7/8)
Weight: 55 kg
Width (W) 740 x Depth (D) 1,010 x Height (H) 1,050 [mm]
Gun tower (L) assembly
No. Name Specifications Qty.
1 Gun tower (L) assembly See illustration above 1